journal article·2005-02

Modeling of macrosegregation caused by volumetric deformation in a coherent mushy zone

Lilia C. Nicolli, Asbjørn Mo, Mohammed M’Hamdi

Publisher page

Abstract

A two-phase volume-averaged continuum model is presented that quantifies macrosegregation formation during solidification of metallic alloys caused by deformation of the dendritic network and associated melt flow in the coherent part of the mushy zone. Also, the macrosegregation formation associated with the solidification shrinkage (inverse segregation) is taken into account. Based on experimental evidence established elsewhere, volumetric viscoplastic deformation (densification/dilatation) of the coherent dendritic network is included in the model. While the thermomechanical model previously outlined (M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93) has been used to calculate the temperature and velocity fields associated with the thermally induced deformations and shrinkage driven melt flow, the solute conservation equation including both the liquid and a solid volume-averaged velocity is solved in the present study. In modeling examples, the macrosegregation formation caused by mechanically imposed as well as by thermally induced deformations has been calculated. The modeling results for an Al-4 wt pct Cu alloy indicate that even quite small volumetric strains (≈2 pct), which can be associated with thermally induced deformations, can lead to a macroscopic composition variation in the final casting comparable to that resulting from the solidification shrinkage induced melt flow. These results can be explained by the relatively large volumetric viscoplastic deformation in the coherent mush resulting from the applied constitutive model, as well as the relatively large difference in composition for the studied Al-Cu alloy in the solid and liquid phases at high solid fractions at which the deformation takes place.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
2. C.J. Vreeman, M.J.M. Krane, and F.P. Incropera: Int. J. Heat Mass Transfer, 2000, vol. 43, pp. 677–86.10.1016/S0017-9310(99)00174-X ↗
3. C.J. Vreeman and F.P. Incropera: Int. J. Heat Mass Transfer, 2000, vol. 43, pp. 687–704.10.1016/S0017-9310(99)00175-1 ↗
4. C.J. Vreeman, J.D. Schloz, and M.J.M. Krane: J. Heat Transfer-Trans. ASME, 2002, vol. 124 (5), pp. 947–53.10.1115/1.1482089 ↗
5. M. Wu, A. Ludwig, P.R. Sahm, and A. Buhrig-Polaczeck: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 261–68.
6. A. Olsson, R. West, and H. Fredriksson: Scand. J. Metall., 1986, vol. 15, pp. 104–12.
7. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
8. Q.Z. Diao and H.L. Tsai: Metall. Trans. A, 1993, vol. 24A, pp. 963–73.10.1007/BF02656518 ↗
9. P.J. Prescott and F.P. Incropera: Metall. Trans. B, 1991, vol. 22B, pp. 529–39.10.1007/BF02654292 ↗
10. T. Jalanti: Ph.D. No. 2145, École Polytechnique Fédérale de Lausanne, 2000.
11. M.C. Schneider and C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2373–88.10.1007/BF02671251 ↗
12. J.P. Gu and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1357–66.
13. H. Yang, L. Zhao, X. Zhang, K. Deng, W. Li, and Y. Gan: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1345–56.10.1007/s11663-998-0058-2 ↗
14. E.E. Emley: Int. Met. Rev., 1976, June, review 206, pp. 75–115.10.1179/imtr.1976.21.1.75 ↗
15. K. Buxmann: Metallurgy, 1977, vol. 31 (2), pp. 163–70.
16. H.J. Thevik, A. Mo, and T. Rusten: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 135–42.10.1007/s11663-999-0013-x ↗
17. K. Miyazawa and K. Schwerdtfeger: Arch. Eisenhüttenwes., 1981, vol. 52, pp. 415–22.10.1002/srin.198104599 ↗
18. C. Beckermann: Int. Mater. Rev., 2002, vol. 47 (5), pp. 243–61.10.1179/095066002225006557 ↗
19. B. Andersson and J.E. Tibballs: in Continuous Casting of Non-Ferrous Metals and Alloys, H.D. Merchant, D.E. Tyler, and E.H. Chia, eds., TMS-AIME, Warrendale, PA, 1989, pp. 177–85.
20. C. Gras, M. Meredith, K. Gatenby, and J.D. Hunt: Mater. Sci. Forum, 2002, vols. 396–402, pp. 89–94.10.4028/www.scientific.net/MSF.396-402.89 ↗
21. S.A. Lockyer, M. Yun, J.D. Hunt, and D.V. Edmonds: Aluminium Alloys: Their Physical and Mechanical Properties, PTS 1–3 Materials Science Forum, Transtec Publications Ltd., Zurich-Uetikan, Switzerland, 1996, vol. 217, pp. 367–72.
22. A. Mo, M. M’Hamdi, and H.G. Fjær: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 199–206.
23. R.J.A. Janssen, G.C.J. Bart, M.C.M. Cornelissen, and J.M. Rabenberg: Appl. Scient. Res., 1994, vol. 52, pp. 21–35.10.1007/BF00849165 ↗
24. T. Kajitani, J.-M. Drezet, and M. Rappaz: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1479–91.10.1007/s11661-001-0236-1 ↗
25. G. Lesoult, C.-A. Gandin, and N.T. Niane: Acta Mater., 2003, vol. 51, pp. 5263–83.10.1016/S1359-6454(03)00379-3 ↗
26. H.F. Shen and C. Beckermann: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 69–78.10.1007/s11663-002-0087-1 ↗
27. J.-M. Drezet, O. Ludwig, M. M’Hamdi, H.-G. Fjær, and C.L. Martin: in Light Metals 2004, A.T. TaBereaux, ed., TMS, Warrendale, PA, 2004, pp. 665–60.
28. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
29. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461–72.10.1007/s11661-000-0264-2 ↗
30. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
31. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 237–59.10.1016/S0749-6419(97)00010-7 ↗
32. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng., 2002, vol. A325, pp. 292–301.10.1016/S0921-5093(01)01528-3 ↗
33. O. Ludwig, C.L. Martin, and M. Suéry: Aluminium, 2002, vol. 78, pp. 830–34.
34. H. Combeau, J.-M. Drezet, A. Mo, and M. Rappaz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2314–27.10.1007/BF02651886 ↗
35. R. de Boer and W. Ehlers: Acta Mech., 1990, vol. 83, pp. 77–92.10.1007/BF01174734 ↗
36. C.L. Martin, O. Ludwig, and M. Suéry: Proc. WCCM V, Vienna, Austria, 2002, F.G. Rammerstorfer, H.A. Mang and J. Eberhardsteiner, eds., University of Technology, Vienna, Austria.
37. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 183–90.
38. H.G. Fjær and A. Mo. Alspen: Metall. Trans. B, 1993, vol. 14B, pp. 193–218.
39. B. Magnin, L. Katgerman, and B. Hannart: in Modelling of Casting, Welding and Advanced Solidification Processes—VI, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 303–10.
40. A. Mo and H.J. Thevik: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2189–94.10.1007/s11661-998-0043-z ↗
41. H.G. Fjær, E.J. Holm, H. Sund, and M. M’Hamdi: Aluminium, 2002, vol. 78, pp. 843–47.
42. G. Amiez and P.-A. Gremaud: Numerishe Mathematik, 1991, vol. 59, pp. 71–89.10.1007/BF01385771 ↗
43. N. Ahmad, H. Combeau, J.L. Desbiolles, T. Jalanti, G. Lesoult, J. Rappaz, M. Rappaz, and C. Stomp: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 617–30.10.1007/s11661-998-0143-9 ↗
44. N. Brookes and J.R. Hughes: Computer Methods in Applied Mechanics and Engineering, 1982, vol. 32, pp. 199–259.10.1016/0045-7825(82)90071-8 ↗
45. D.S. Kershaw: J. Computat. Phys., 1978, vol. 26, pp. 43–65.10.1016/0021-9991(78)90098-0 ↗
46. H.G. Fjær and A. Mo: ALSPEN—A Mathematical Model for Thermal Stresses in Direct Chill Casting of Aluminium Billets. Metall. Mater. Trans. B. 1993, vol. 14B, pp. 193–218.