journal article·2002-03

Creep processes in magnesium alloys and their composites

V. Sklenička, M. Pahutová, K. Kuchařová, M. Svoboda, T. G. Langdon

Publisher page

Abstract

A comparison is made between the creep characteristics of two squeeze-cast magnesium alloys (AZ 91 and QE 22) reinforced with 20 vol pct Al2O3 short fibers and the unreinforced AZ 91 and QE 22 matrix alloys. The results show the creep resistance of the reinforced materials is considerably improved by comparison with the unreinforced matrix alloys. It is suggested that creep strengthening in these short-fiber composites arises primarily from the existence of a threshold stress and the effect of load transfer. By testing samples to failure, it is demonstrated that the unreinforced and reinforced materials exhibit similar times to failure at the higher stress levels. A detailed microstructural investigation by transmission electron microscopy (TEM) reveals no substantial changes in matrix microstructure due to the presence of the reinforcement. This suggests that direct composite strengthening dominates over indirect effects.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. H. Friedrich and S. Schumann: in Magnesium 2000, E. Aghion and D. Eliezer, eds., Magnesium Research Inst., Beer-Sheva, Israel, 2000, pp. 9–18.
2. D. Magers and J. Willekens: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany, 1998, pp. 105–12.
3. R.L. Edgar: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-CH, Weinheim, 2000, pp. 3–8.
4. A.A. Luo: in Magnesium Technology 2000, H.I. Kaplan, J.N. Hryn, and B.L. Clow, eds., TMS, Warrendale, PA, 2000, pp. 89–98.
5. G. Cole: in Magnesium 2000, E. Aghion and D. Eliezer, eds., Magnesium Research Inst., Beer-Sheva, Israel, 2000, pp. 478–85.
6. J.F. King: Magnesium Industry, 2000, vol. 1, pp. 22–27.
7. A.A. Luo and T. Shinoda: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft, Frankfurt, Germany, 1998, pp. 151–56.
8. T. Horie, H. Iwahori, Y. Seno, and Y. Awano: in Magnesium Technology 2000, H.I. Kaplan, J.N. Hryn, and B.L. Clow, eds., TMS, Warrendale, PA, 2000, pp. 261–70.10.1002/9781118808962.ch36 ↗
9. M.O. Pekguleryuz and J. Renand: in Magnesium Technology 2000, H.I. Kaplan, J.N. Hryn, and B.L. Clow, eds., TMS, Warrendale, PA, 2000, pp. 279–84.10.1002/9781118808962.ch38 ↗
10. M.O. Pekguleryuz: Mater. Sci. Forum, 2000, vols. 350–351, pp. 131–40.10.4028/www.scientific.net/MSF.350-351.131 ↗
11. B. Bronfin, F. Aghion, F. von Buch, S. Schumann and M. Katsir: in Magnesium Technology 2001, J. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 127–30.10.1002/9781118805497.ch23 ↗
12. K. Pettersen, H. Westengen, J.I. Skar, M. Videm, and L-Y. Wei: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-CH, Weinheim, 2000, pp. 29–34.10.1002/3527607552.ch5 ↗
13. B.L. Mordike and T. Ebert: Mater. Sci. Eng., 2001, vol. A302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
14. S. Spigarelli, M. Regev, E. Evangelista, and A. Rosen: Mater. Sci. Technol., 2001, vol. 17, pp. 627–38.10.1179/026708301101510483 ↗
15. W. Blum, P. Weidinger, B. Watzinger, R. Sedlacek, R. Rosch, and H.G. Maldenwanger: Z. Metallkd., 1997, vol. 88, pp. 636–41.
16. I.J. Palmear: Mater. Sci. Technol., 1994, vol. 10, pp. 1–16.10.1179/026708394790163401 ↗
17. M. Regev, E. Aghion, A. Rosen, and M. Bamberger: Mater. Sci. Eng., 1998, vol. A252, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
18. K.U. Kainer and B.L. Mordike: Metall, 1990, vol. 44, pp. 438–43.
19. B. Hallsted, Z.-K. Liu, and J. Agren: Mater. Sci. Eng., 1990, vol. A129, pp. 135–45.10.1016/0921-5093(90)90352-4 ↗
20. K.U. Kainer: Mater. Sci. Eng., 1991, vol. A135, pp. 243–46.10.1016/0921-5093(91)90570-D ↗
21. K.U. Kainer: in Magnesium Alloys and Their Applications, B.L. Mordike and F. Hehmann, eds., DGM, Oberursel, Germany, 1992, pp. 415–22.
22. K. Purazrang, P. Abachi, and K.U. Kainer: Comp. Eng., 1993, vol. 3, pp. 489–505.10.1016/0961-9526(93)90048-O ↗
23. F.U. Rehman, J. Fox, H.M. Flower, and D.R.F. West: J. Mater. Sci., 1994, vol. 29, pp. 1636–45.10.1007/BF00368938 ↗
24. B.L. Mordike and P. Lukáč: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed., The Institute of Materials, London, 1996, pp. 419–29.
25. T. Ebert, F. Moll, and K.U., Kainer: Powder Metall., 1997, vol. 40, pp. 126–30.10.1179/pom.1997.40.2.126 ↗
26. Y. Li and T.G. Langdon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2059–66.10.1007/s11661-999-0016-x ↗
27. M. Pahutová, J. Březina, K., Kuchařová, V. Sklenička, and T.G. Langdon: Mater. Lett., 1999, vol. 39, pp. 179–83.10.1016/S0167-577X(99)00002-6 ↗
28. V. Sklenička, M. Pahutová, K. Kuchařová, M. Svoboda, and T.G. Langdon: Key Eng. Mater., 2000, vols. 171–174, pp. 593–600.
29. F. Chmelik, F. Moll, J. Kiehn, P. Lukáč, B.L. Mordike, and K.U. Kainer Adv. Eng. Mater., 2000, vol. 2, pp. 600–04.10.1002/1527-2648(200009)2:9<600::AID-ADEM600>3.0.CO;2-D ↗
30. J. Kiehn, K.U. Kainer, P. Vostrý, and I. Stulíková: Phys. Status Solidi (a), 1997, vol. 161, pp. 85–95.10.1002/1521-396X(199705)161:1<85::AID-PSSA85>3.0.CO;2-1 ↗
31. J. Kiehn, B. Smola, P. Vostrý, I. Stulíková, and K.U. Kainer: Phys. Status Solidi (a), 1997, vol. 164, pp. 709–23.10.1002/1521-396X(199712)164:2<709::AID-PSSA709>3.0.CO;2-B ↗
32. F. Moll, F. Chmelík, P. Lukáč, B.L. Mordike, and K.U. Kainer: Mater. Sci. Eng., 2000, vol. A291, pp. 246–49.10.1016/S0921-5093(00)00963-1 ↗
33. V. Sklenička, M. Svoboda, K. Kuchařová, and T.G. Langdon: Mater. Sci. Eng., 2001, in press.
34. K. Puzarang, K.U. Kainer, and B.L. Mordike: Composites, 1991, vol. 22, pp. 456–62.10.1016/0010-4361(91)90205-U ↗
35. B.L. Mordike, K.U. Kainer, and B. Sommer: Proc. 3rd Int. Magnesium Conf., G.W. Lormer, ed., The Institute of Materials, London, 1996, pp. 637–45.
36. F.A. Mohamed, K.T. Park, and E.J. Lavernia: Mater. Sci. Eng., 1992, vol. 150A, pp. 21–35.10.1016/0921-5093(90)90004-M ↗
37. K.T. Park, E.J. Lavernia, and F.A. Mohamed: Acta Metall. Mater., 1994, vol. 42, pp. 667–78.10.1016/0956-7151(94)90264-X ↗
38. V. Sklenička, M. Pahutová, K. Kuchařová, M. Svoboda, and T.G. Langdon: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-CH, Weinheim, 2000, pp. 246–51.10.1002/3527607552.ch38 ↗
39. M. Regev, E. Aghion, and A. Rosen: Mater. Sci. Eng., 1997, vols. 234–236, pp. 123–26.10.1016/S0921-5093(97)00215-3 ↗
40. J.K. Solberg, J. Torklep, O. Bauger, and H. Gjestland: Mater. Sci. Eng., 1991, vol. A134, pp. 1201–03.10.1016/0921-5093(91)90955-M ↗
41. E. Aghion and B. Bronfin: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed., The Institute of Materials, London, 1997, pp. 313–25.
42. S. Celotto: Acta Mater., 2000, vol. 48, pp. 1775–87.10.1016/S1359-6454(00)00004-5 ↗
43. A.F. Crawley and B. Lagowski: Metall. Trans., 1974, vol. 5, pp. 949–51.10.1007/BF02643153 ↗
44. J. Kiehn, K.U. Kainer, P. Vostrý, and I. Stulíková: Phys. Status Solidi (a), 1997, vol. 161, pp. 85–95.10.1002/1521-396X(199705)161:1<85::AID-PSSA85>3.0.CO;2-1 ↗
45. J. Kiehn, W. Riehemann, K.U. Kainer, P. Vostrý, I. Stulíková, and B. Smola: Proc. 3rd Int. Magnesium Conf., G.W. Lorimer, ed. The Institute of Materials, London, 1997, pp. 663–75.
46. V.C. Nardone and K.M. Prewo: Scripta Metall. 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
47. K.-S. Sohn, K. Euh, S. Lee, and I. Park: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2543–54.10.1007/s11661-998-0226-7 ↗