journal article·2003-09Open access

The importance of viscoplastic strain rate in the formation of center cracks during the start-up phase of direct-chill cast aluminum extrusion ingots

M. M’Hamdi, S. Benum, D. Mortensen, H. G. Fjær, J. -M. Drezet

Abstract

A comparison of experimental observations and computer simulations shows that trends in the occurrence and severity of center cracks in direct-chill (DC) cast ingots due to different initial casting speed histories may best be explained by the changes in viscoplastic strain rate close to the center of the base of the ingot. The thermomechanical histories of five ingots were simulated and correlations between stresses, strains, strain rates, and liquid pressure drops due to feeding restrictions were considered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. T.W. Clyne and G.J. Davies: Br. Foundry, 1981, vol. 74, pp. 65–73.
2. W.S. Pellini: Foundry, 1952, pp. 125–33 and 192–99.
3. Y.F. Guven and J.D. Hunt: Cast Met., 1988, vol. 1, pp. 104–11.10.1080/09534962.1988.11818955 ↗
4. J. Campbell: Castings, Butterworth Heinemann, England, 1991.
5. U. Feurer: Giesserei Forschung, 1976, vol. 28, p. 75.
6. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–550.10.1007/s11661-999-0334-z ↗
7. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslos 1991.
8. W. Schneider and E.K. Jensen: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 931–36.
9. E.K. Jensen and W. Schneider: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 937–43.
10. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461–72.10.1007/s11661-000-0264-2 ↗
11. M. M’hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081–93.10.1007/s11661-002-0040-6 ↗
12. J.A. Spittle and A.A. Cushway: Met. Technol. 1983, vol. 10, pp. 6–13.10.1179/030716983803291226 ↗
13. B. Warrington and D.G. McCartney: Cast Met., 1989, vol. 2(3), pp. 135–43.
14. A.L. Dons, E.K. Jensen, Y. Langsrud, E. Trømborg, and S. Brusethaug: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2135–46.10.1007/s11661-999-0025-9 ↗
15. D. Mortensen: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 119–33.10.1007/s11663-999-0012-y ↗
16. H.G. Fjær and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
17. B.R. Henriksen, E.K. Jensen, and D. Mortensen: in Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckermann, eds., TMS, USA, 1998, pp. 623–30.
18. L.F. Mondolfo: ALUMINIUM ALLOYS, Structure and Properties, Butterworth and Co. London, 1976.
19. L. Ohm and S Engler: Giessereiforschung, 1990, vol. 42 (4), pp. 149–62.
20. J.M. Drezet and G. Eggeler: Scripta. Metall. Mater., 1994, vol. 31 (6), pp. 757–62.10.1016/0956-716X(94)90223-2 ↗
21. P. Wisniewski and H.D. Brody: in Modeling and Control of Casting and Welding Processes V, M. Rappaz, M. R. Özgü, and K.W. Mahi, eds., TMS, Warrendale, PA, 1991, pp. 273–78.
22. H. Fjær, D. Mortensen, A. Håkonsen, and E.A. Sørheim: Light Metals, TMS, Warrendale, PA, 1999, pp. 743–48.
23. S. Benum, D. Mortensen, and H. Fjær: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH Verlag, Germany, 2000, pp. 54–60.10.1002/3527607331.ch8 ↗
24. C.L. Martin, D. Favier, and M Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 215–35.10.1016/S0749-6419(97)00009-0 ↗
25. C.L. Martin, D. Favier, and M Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 237–59.10.1016/S0749-6419(97)00010-7 ↗
26. C.L. Martin, D. Favier, and M Suéry: Int. J. Plasticity, 1999, vol. 15, pp. 981–1008.10.1016/S0749-6419(99)00017-0 ↗
27. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng. A, 2000, vol. A325, pp. 293–302.
28. H.G. Fjær, E.K. Jensen, and A. Mo: Proc. 5th Int. Aluminium Extrusion Technology Seminar, R.I. Werner and V.R. Bird, eds. The Aluminum Association, Aluminum Extruders Council, USA, 1992, pp. 113–20.
29. D.R. Poirier, K. S. Yeum, and A.L. Maples: Metall. Trans. A, 1987, vol. 18A, pp. 1979–87.10.1007/BF02647028 ↗
30. E. Niyama: Japan-USA Joint Seminar on Solidification of Metals and Alloys, National Science Foundation, 1977, pp. 271–82.