journal article·2000-03

The role of plasticity in bimaterial fracture with ductile interlayers

N. I. Tymiak, A. A. Volinsky, M. D. Kriese, S. A. Downs, W. W. Gerberich

Publisher page

Abstract

Evaluation of the plasticity effects in fracture along ductile/brittle interfaces requires appropriate models for plastic dissipation in a ductile component. For thin ductile films, constitutive properties appropriate to the small volumes involved are essential for adequate modeling. Here, yield stress is of primary importance. With nanoindentation, one can obtain both a large strain flow stress as well as the far field yield stress representing the small strain elastic-plastic boundary. Using these to estimate an appropriate plastic strain energy density, the crack tip plastic energy dissipation rates associated with the interfacial crack extension can be estimated for a ductile film. With the preceding analysis, plasticity effects on the interfacial toughness have been evaluated for external measures of strain energy release rates as obtained from indentation tests using the axisymmetric bilayer theory. Comparison involved RF sputtered 200-to 2000-nm-thick Cu interlayers between oxidized silicon and sputtered tungsten. Experimental values for the Cu/SiO2 interface increased with Cu film thickness from 1 to 15 J/m2. This was in qualitative agreement with the theoretical predictions for plastic energy dissipation rates. In contrast, first-order estimates suggest that the observed interfacial toughness increases cannot be attributed to either mode mixity effects or increased intrinsic interfacial fracture energies. As such, crack tip plasticity is identified as the dominant mechanism for increasing interfacial toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A. Furua, N. Hosoi, and Y. Oshita: J. Appl. Phys., 1995, vol. 78, pp. 5989–92.10.1063/1.360604 ↗
2. R.G. Stringfellow and L.B. Freund: Int. J. Solids Struct., 1993, vol. 30, pp. 1379–95.10.1016/0020-7683(93)90219-W ↗
3. S. Venkataraman, D.L. Kohlstedt, and W.W. Gerberich: J. Mater. Res., 1996, vol. 11, pp. 3133–45.10.1557/JMR.1996.0398 ↗
4. A. Bagchi and A.G. Evans: Thin Solid Films, 1986, vol. 286, pp. 203–12.10.1016/S0040-6090(96)08551-3 ↗
5. Z. Sou and J.W. Hutchinson: Int. J. Fract., 1990, vol. 43, pp. 1–18.10.1007/BF00018123 ↗
6. K. Bose, P.A. Mataga, and P. Ponte Castaneda: Intern. J. Sol. & Struct., 1999, vol. 36, pp. 1–34.10.1016/S0020-7683(97)00270-9 ↗
7. H. Gleiter: Nanostruct. Mater., 1999, vol. 6, pp. 3–14.10.1016/0965-9773(95)00025-9 ↗
8. G.W. Nieman, J.R. Weertman, and R.W. Siegel: J. Mater. Res., 1991, vol. 6, pp. 1012–27.10.1557/JMR.1991.1012 ↗
9. M.D. Drory and J.W. Hutchinson: Proc. R. Soc. London A, 1996, vol. 452, pp. 2319–41.10.1098/rspa.1996.0124 ↗
10. J. Vlassak and W.D. Nix: J. Mech. Phys. Solids, 1996, vol. 42, pp. 1223–45.10.1016/0022-5096(94)90033-7 ↗
11. D.B. Marshall and A.G. Evans: J. Appl. Phys., 1984, vol. 56, pp. 2632–38.10.1063/1.333794 ↗
12. M.Y. He, A.G. Evans, and J.W. Hutchinson: Acta Metall. Mater., 1996, vol. 44, pp. 2963–71.10.1016/1359-6454(95)00384-3 ↗
13. M.D. Kriese, N.R. Moody, and W.W. Gerberich: Acta Mater., 1998, vol. 46, pp. 6623–30.10.1016/S1359-6454(98)00277-8 ↗
14. M.D. Kriese, N.R. Moody, and W.W. Gerberich: J. Mater. Res., 1999, vol. 14, pp. 3007–18.10.1557/JMR.1999.0404 ↗
15. M.D. Kriese, N.R. Moody, and W.W. Gerberich: J. Mater. Res., 1999, vol. 14, pp. 3019–25.10.1557/JMR.1999.0405 ↗
16. F.A. McClintock: J. Appl. Mech., 1958, vol. 25, pp. 582–88.10.1115/1.4011876 ↗
17. F.A. McClintock and G.R. Irwin: Plasticity Aspects of Fracture Mechanics Fracture Toughness Testing and Its Applications, ASTM STP 381, ASTM, Philadelphia, PA, 1965, pp. 84–113.10.1520/STP26586S ↗
18. J.R. Rice: Fatigue Crack Propagation, ASTM STP 415, ASTM, Philadelphia, PA, 1967, pp. 247–309.10.1520/STP47234S ↗
19. J.W. Hutchinson, M.D. Thouless, and E.G. Linger: Acta Metall. Mater., ASTM, 1992, vol. 40, pp. 295–308.10.1016/0956-7151(92)90304-W ↗
20. S.X. Mao and A.G. Evans: Acta Mater., 1997, vol. 45, pp. 4263–69.10.1016/S1359-6454(97)00061-X ↗
21. K.J. Hsia, Z. Sou, and W. Yang: J. Mech. Phys. Solids, 1994, vol. 42, pp. 877–96.10.1016/0022-5096(94)90076-0 ↗
22. W.W. Gerberich: University of Minnesota, Minneapolis, MN, unpublished research, 1998.
23. D. Tabor: The Hardness of Metals, Claredon Press, United Kingdom, 1951, pp. 174.
24. W.W. Gerberich, J.C. Nelson, E.T. Lilleodden, P. Anderson, and J.T. Wyrobek: Acta Metall. Mater., 1996, vol. 44, pp. 3585–98.10.1016/1359-6454(96)00010-9 ↗
25. T.W. Wu: J. Mater. Res., 1991, vol. 6, pp. 407–26.10.1557/JMR.1991.0407 ↗
26. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
27. A.K. Bhattacharya and W.D. Nix: Int. J. Solid Struct., 1988, vol. 24, pp. 1287–98.10.1016/0020-7683(88)90091-1 ↗
28. J.B. Savader, M.R. Scanlon, R.C. Cammarata, D.T. Smith, and C. Hayzelden: Scripta Mater., 1997, pp. 29–34.10.1016/S1359-6462(96)00349-1 ↗
29. J.R. Smith, T. Hong, and D. Srolovitz: Phys. Rev. Lett., 1994, vol. 72, p. 4021.10.1103/PhysRevLett.72.4021 ↗
30. G. Dehm, M. Ruhle, H.D. Conway, and R. Raj: Acta Mater., 1997, vol. 45, pp. 489–99.10.1016/S1359-6454(96)00213-3 ↗
31. J.E. Ritter, T.J. Lardner, Rosenfeld, and M.R. Lin: J. Appl. Phys., 1989, vol. 66, pp. 3627–34.10.1063/1.344071 ↗