Recrystallization Behavior during Postprocessing of an Additively Manufactured Nickel-Based Superalloy
Source abstract
Abstract
Abstract Powder bed fusion–laser beam (PBF-LB) is a primary metal additive manufacturing (AM) process for industrialization. However, post-processing recipes for PBF-LB are distinct from those of conventional manufacturing and remain critical in governing the mechanical performance of PBF-LB components. This study investigates the influence of post-processing on the mechanical behaviour of Haynes 282—a Nickel-based superalloy utilized in turbine exhaust case and other high-temperature (up to 760 °C) applications—fabricated using high productivity themed PBF-LB with layer thickness of 60 and 90 μ m. The as-built condition and recipe with solution treatment at 1150 °C (conventional treatment) exhibited anisotropy in both grain morphology and mechanical performance. Increasing the solution Treatment temperature to 1200 °C successfully reduced anisotropy in the 60 μ m layer thickness build, owing to partial recrystallization, however anisotropy still exists in the 90 μ m layer thickness build. Solution treatment at 1250 °C resulted in complete recrystallization and isotropic hot ductility across both the builds, albeit with a significant reduction in strength. These microstructural and mechanical response variations are discussed with emphasis on layer thickness, the volumetric energy density, dislocation density in the as-built microstructures, and solution treatment temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Haynes International: HAYNES ® 282 ® alloy Material Brochure, 2020. https://haynesintl.com/
2. S. Dryepondt, S. Taller, F. List, and Z. Snow: Preliminary feasibility of printing, microstructure analysis and mechanical performance of a down selected Ni alloy, 2023. Accessed: Jan. 14, 2026. https://www.ornl.gov/publication/preliminary-feasibility-printing-microstructure-analysis-and-mechanical-performance10.2172/2479047 ↗
3. A. Deshpande, S.D. Nath, S. Atre, and K. Hsu: Metals (Basel)., 2020, https://doi.org/10.3390/met10050629.10.3390/met10050629 ↗
4. R. Otto, et al.: Mater. Des., 2021, https://doi.org/10.1016/j.matdes.2021.109656.10.1016/j.matdes.2021.109656 ↗
5. V.S. Hariharan, S. Pramod, D. Kesavan, B.S. Murty, and G. Phanikumar: J. Mater. Sci., 2022, vol. 57(21), pp. 9693–9713. https://doi.org/10.1007/s10853-022-07170-3.10.1007/s10853-022-07170-3 ↗
6. J. Wanni, et al.: Metall. Mater. Trans. A, 2025, vol. 56A(9), pp. 3681–3701. https://doi.org/10.1007/s11661-025-07867-5.10.1007/s11661-025-07867-5 ↗
7. A.S. Shaikh, F. Schulz, K. Minet-Lallemand, and E. Hryha: Mater. Today Commun., 2021, https://doi.org/10.1016/j.mtcomm.2021.102038.10.1016/j.mtcomm.2021.102038 ↗
8. K. A. Christofidou et al.: Microstructural Control and Optimization of Haynes 282 Manufactured Through Laser Powder Bed Fusion, in Minerals, Metals and Materials Series. Springer Science and Business Media Deutschland GmbH, 2020, pp. 1014–1023. https://doi.org/10.1007/978-3-030-51834-9_99.10.1007/978-3-030-51834-9_99 ↗
9. J. Boswell, J. Jones, N. Barnard, D. Clark, M. Whittaker, and R. Lancaster: Mater. Des., 2021, https://doi.org/10.1016/j.matdes.2021.109725.10.1016/j.matdes.2021.109725 ↗
10. R. Ghiaasiaan, N. Ahmad, P.R. Gradl, S. Shao, and N. Shamsaei: Mater. Sci. Eng. A, 2022, https://doi.org/10.1016/j.msea.2021.142234.10.1016/j.msea.2021.142234 ↗
11. A. Fardan, et al.: Addit. Manuf., 2025, vol. 99, p. 104672. https://doi.org/10.1016/j.addma.2025.104672.10.1016/j.addma.2025.104672 ↗
12. L. Liu, et al.: Mater. Sci. Eng. A, 2023, vol. 875, p. 145114. https://doi.org/10.1016/j.msea.2023.145114.10.1016/j.msea.2023.145114 ↗
13. O. Adegoke, J. Andersson, H. Brodin, and R. Pederson: Materials, 2020, https://doi.org/10.3390/MA13173770.10.3390/MA13173770 ↗
14. M. Hafezi, et al.: J. Market. Res., 2024, vol. 29, pp. 1983–2002. https://doi.org/10.1016/j.jmrt.2024.01.264.10.1016/j.jmrt.2024.01.264 ↗
15. P. Paradise, et al.: J. Mater. Eng. Perform., 2022, vol. 31(8), pp. 6205–20. https://doi.org/10.1007/s11665-022-06961-8.10.1007/s11665-022-06961-8 ↗
16. A.S. Shaikh, E. Eriksson, M.H. Colliander, K. Minet-Lallemand, and E. Hryha: Materialia (Oxf), 2025, vol. 39, p. 102334. https://doi.org/10.1016/j.mtla.2025.102334.10.1016/j.mtla.2025.102334 ↗
17. SAE-AMS5951A Nickel alloy, corrosion and heat-resistant, sheet, strip, and plate, 57Ni-20Cr-10Co-8.5Mo-2.1Ti-1.5Al-0.005B, vacuum induction and consumable electrode melted, solution heat treated, precipitation heat treatable, 2010.
18. F. Deirmina, O. Adegoke, M. Del Col, and M. Pellizzari: Addit. Manuf. Lett., 2023, vol. 7, p. 100182. https://doi.org/10.1016/j.addlet.2023.100182.10.1016/j.addlet.2023.100182 ↗
19. K. Swaminathan, R. Gore, M. Miocic, J. Olsson, T. Raza, and J. Andersson: Mater. Today Commun., 2026, vol. 51, p. 114828. https://doi.org/10.1016/j.mtcomm.2026.114828.10.1016/j.mtcomm.2026.114828 ↗
20. L.P. Kubin and A. Mortensen: Scr. Mater., 2003, vol. 48(2), pp. 119–25. https://doi.org/10.1016/S1359-6462(02)00335-4.10.1016/S1359-6462(02)00335-4 ↗
21. H. Gao, Y. Huang, W.D. Nix, and J.W. Hutchinson: J. Mech. Phys. Solids, 1999, vol. 47(6), pp. 1239–63. https://doi.org/10.1016/S0022-5096(98)00103-3.10.1016/S0022-5096(98)00103-3 ↗
22. Q. Liu, D. Juul Jensen, and N. Hansen: Acta Mater., 1998, vol. 46(16), pp. 5819–38. https://doi.org/10.1016/S1359-6454(98)00229-8.10.1016/S1359-6454(98)00229-8 ↗
23. M.G. Fahrmann, and L.M. Pike: Experimental TTT diagram of HAYNES 282 alloy, in Minerals, Metals and Materials Series, Springer International Publishing, 2018, pp. 565–578. https://doi.org/10.1007/978-3-319-89480-5_37.10.1007/978-3-319-89480-5_37 ↗
24. C. Joseph, C. Persson, and M. Hörnqvist Colliander: Metall. Mater. Trans. A, 2020, vol. 51A(12), pp. 6136–41. https://doi.org/10.1007/s11661-020-06019-1.10.1007/s11661-020-06019-1 ↗
25. C. Joseph: Microstructure evolution and mechanical properties of Haynes 282, no. Ny serie nr. 4382. in Doktorsavhandlingar vid Chalmers tekniska högskola. Göteborg: Chalmers University of Technology, 2018.
26. T. DebRoy, et al.: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001.10.1016/j.pmatsci.2017.10.001 ↗
27. D. Field, L. Bradford, M. Nowell, and T. Lillo: Acta Mater., 2007, vol. 55(12), pp. 4233–41. https://doi.org/10.1016/j.actamat.2007.03.021.10.1016/j.actamat.2007.03.021 ↗
28. H. Shi, et al.: Mater. Charact., 2015, vol. 110, pp. 52–59. https://doi.org/10.1016/j.matchar.2015.10.007.10.1016/j.matchar.2015.10.007 ↗
29. D. Metzler, and M.G. Fahrmann: The Effect of Prior TMP on Annealed Grain Size in HAYNES 282 Alloy, in: 8th International Symposium on Superalloy 718 and Derivatives, Wiley, 2014, pp. 379–389. https://doi.org/10.1002/9781119016854.ch30.10.1002/9781119016854.ch30 ↗
30. J. Xu, H. Brodin, R.L. Peng, V. Luzin, and J. Moverare: Mater. Charact., 2022, https://doi.org/10.1016/j.matchar.2022.111742.10.1016/j.matchar.2022.111742 ↗
31. C. Hilla, et al.: Metall. Mater. Trans. A., 2023, vol. 54A(6), pp. 2470–85. https://doi.org/10.1007/s11661-023-07035-7.10.1007/s11661-023-07035-7 ↗
32. A. Ariaseta, S. Kobayashi, M. Takeyama, Y. Wang, and S. Imano: Metall. Mater. Trans. A., 2020, vol. 51A(2), pp. 973–81. https://doi.org/10.1007/s11661-019-05560-y.10.1007/s11661-019-05560-y ↗
33. N. Bozzolo, A. Agnoli, N. Souaï, M. Bernacki, and R.E. Logé: Mater. Sci. Forum, 2013, vol. 753, pp. 321–24. https://doi.org/10.4028/www.scientific.net/MSF.753.321.10.4028/www.scientific.net/MSF.753.321 ↗
34. M.G. Fahrmann, and D.A. Metzler: Abnormal grain growth maps of wrought Ni-base superalloys,” 2023, pp. 107–116. https://doi.org/10.1007/978-3-031-27447-3_7.10.1007/978-3-031-27447-3_7 ↗
35. A. Leicht, C.H. Yu, V. Luzin, U. Klement, and E. Hryha: Mater. Charact., 2020, vol. 163, p. 110309. https://doi.org/10.1016/j.matchar.2020.110309.10.1016/j.matchar.2020.110309 ↗