journal article·2026-02

Laser Re-melting of Mg–Zn–Zr Alloys: Microstructure Evolution and Solidification Defects

Wei Sun, Lingxue Guo, Zhaocong Huang, Sansan Shuai, Yangchao Deng, Zhijia Hua, Gaoyang Mi, Jiangkun Fan, Guang Zeng

Publisher page

Abstract

Laser re-melting has demonstrated significant potential for optimizing the microstructure and enhancing the mechanical properties of magnesium alloys, while also providing solidification conditions analogous to those in laser metal deposition. This enables a scientifically sound evaluation of grain morphology evolution from traditional casting to additive manufacturing of magnesium alloys. However, its practical implementation is often limited by the formation of solidification defects, including porosity and hot cracking. This study systematically investigates the microstructural evolution and mechanisms of defect formation during laser re-melting using ultrafast in-situ X-ray imaging and analytical electron microscopy. The results show that intense melt flow during laser re-melting facilitates the movement of bubbles and unmelted particles, which are entrapped at the solid–liquid interface. These bubbles and particles ultimately evolve into porosities and coarse particles, respectively, within the fusion zone (FZ) and near the fusion line. Additionally, fluid-driven heat transfer promotes extensive static recrystallization and precipitation in the heat-affected zone, resulting in a bimodal grain structure, contrasting with the fine equiaxed grains in the FZ. For high Zn content alloys (~6 wt pct), the extended solidification range increases susceptibility to liquation cracking. These findings provide critical insights into the microstructural and defect evolution during laser re-melting and offer valuable guidance for advancing the effectiveness and reliability of laser processing techniques for magnesium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Q. Yang, Z. Xie, J. Li, S. Lv, W. Zhang, R. Wu, H. Pan, R. Li, and X. Qiu: Resour. Chem. Mater., 2023, vol. 2, pp. 151–66.
2. J. Zou, L. Ma, W. Jia, Q. Le, G. Qin, and Y. Yuan: J. Mater. Sci. Technol., 2021, vol. 83, pp. 228–38.10.1016/j.jmst.2020.11.080 ↗
3. S. Lv, Q. Yang, X. Lv, F. Meng, and X. Qiu: Mater. Des., 2023, vol. 225, 111568.10.1016/j.matdes.2022.111568 ↗
4. Z. Yu, H. Yan, J. Chen, and Y. Wu: J. Mater. Sci., 2010, vol. 45, pp. 3797–803.10.1007/s10853-010-4434-3 ↗
5. M. Pastor, H. Zhao, and T. DebRoy: J. Laser Appl., 2000, vol. 12, pp. 91–100.10.2351/1.521922 ↗
6. X. Cao, M. Jahazi, J. Immarigeon, and W. Wallace: J. Mater. Process. Technol., 2006, vol. 171, pp. 188–204.10.1016/j.jmatprotec.2005.06.068 ↗
7. M. Norouzian, M. Amne Elahi, and P. Plapper: J. Adv. Join. Process., 2023, vol. 7, 100139.10.1016/j.jajp.2023.100139 ↗
8. O. Hunziker, D. Dye, and R. Reed: Acta Mater., 2000, vol. 48, pp. 4191–201.10.1016/S1359-6454(00)00273-1 ↗
9. L. Wang, N. Wang, and N. Provatas: Acta Mater., 2017, vol. 126, pp. 302–12.10.1016/j.actamat.2016.11.058 ↗
10. H. Lv, J. Tan, Q. Yuan, F. Wang, Y. Zhou, Q. Dong, A. Tang, J. Eckert, B. Jiang, and F. Pan: J. Magnes. Alloys, 2024, vol. 12, pp. 1687–708.10.1016/j.jma.2024.02.007 ↗
11. M. Schiry and P. Plapper: Proceedings: International Conference on Competitive Manufacturing COMA’19, Stellenbosch University, Stellenbosch, 2019, p. 285.
12. J. Shen, L. Wen, Y. Li, and D. Min: Mater. Sci. Eng. A, 2013, vol. 578, pp. 303–309.10.1016/j.msea.2013.04.093 ↗
13. H. Wang and Z. Li: Chin. J. Nonferrous Met., 2006, vol. 16, p. 1388.
14. D. Zhang, D. Qiu, S. Zhu, M. Dargusch, D. StJohn, and M. Easton: Scripta Mater., 2020, vol. 183, pp. 12–16.10.1016/j.scriptamat.2020.03.006 ↗
15. H. Zhao and T. DebRoy: Weld. J., 2001, vol. 80, pp. 204–10.
16. B. Zhang, Y. Li, and Q. Bai: Chin. J. Mech. Eng., 2017, vol. 30, pp. 515–27.10.1007/s10033-017-0121-5 ↗
17. M.L. Huang, Z.J. Zhang, N. Zhao, and Q. Zhou: Scripta Mater., 2013, vol. 68, pp. 853–56.10.1016/j.scriptamat.2013.02.007 ↗
18. K. Zhang, Y. Chen, S. Marussi, X. Fan, M. Fitzpatrick, S. Bhagavath, M. Majkut, B. Lukic, K. Jakata, A. Rack, M.A. Jones, J. Shinjo, C. Panwisawas, C.L.A. Leung, and P.D. Lee: Nat. Commun., 2024, vol. 15, p. 1715.10.1038/s41467-024-45913-9 ↗
19. C.L.A. Leung, S. Marussi, R.C. Atwood, M. Towrie, P.J. Withers, and P.D. Lee: Nat. Commun., 2018, vol. 9, p. 1355.10.1038/s41467-018-03734-7 ↗
20. S. Katayama, Y. Kawahito, and M. Mizutani: Phys. Proc., 2010, vol. 5, pp. 9–17.10.1016/j.phpro.2010.08.024 ↗
21. S. Pang, W. Chen, and W. Wang: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2808–18.10.1007/s11661-014-2231-3 ↗
22. X. Meng, M. Bachmann, F. Yang, and M. Rethmeier: Acta Mater., 2025, vol. 286, 120740.10.1016/j.actamat.2025.120740 ↗
23. X. Zhang, Z. Tang, Q. Wei, A. Wang, M. Wang, H. Sun, Y. Wu, C. Xia, M. Qian, H. Wang, and H. Wang: Scripta Mater., 2025, vol. 263, 116681.10.1016/j.scriptamat.2025.116681 ↗
24. Y. Jiang, M. Jiang, X. Chen, A. Chen, S. Ma, N. Jiang, S. Zhang, Z. Wang, Z. Lei, and Y. Chen: Opt. Laser Technol., 2024, vol. 169, 110115.10.1016/j.optlastec.2023.110115 ↗
25. P. Jiang, H. Dong, Y. Cai, and M. Gao: Int. J. Adv. Manuf. Technol., 2023, vol. 125, pp. 563–76.10.1007/s00170-022-10586-5 ↗
26. S. Srinivasan, R.R. Bharath, A. Atrens, and P.B. Srinivasan: J. Mater. Eng. Perform., 2025, vol. 2025, pp. 1–34.
27. K. Li, H. Xie, Y.-N. Fu, F. Wang, G. Du, J. Ji, B. Deng, and T. Xiao: Nucl. Sci. Tech., 2024, vol. 35, p. 154.10.1007/s41365-024-01488-0 ↗
28. E. Hondros, M. McLean, K. Mills, K. Mills, B. Keene, R. Brooks, and A. Shirali: Philos. Trans. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci., 1998, vol. 356, pp. 911–25.10.1098/rsta.1998.0196 ↗
29. S. Xie, B. Zhu, J. Qiao, Y. Zhuang, Y. Zhao, and J. Zou: Surf. Interf., 2023, vol. 41, 103214.10.1016/j.surfin.2023.103214 ↗
30. M. Miyagi, Y. Kawahito, H. Kawakami, and T. Shoubu: J. Mater. Process. Technol., 2017, vol. 250, pp. 9–15.10.1016/j.jmatprotec.2017.06.033 ↗
31. A. Heider, J. Sollinger, F. Abt, M. Boley, R. Weber, and T. Graf: Phys. Proc., 2013, vol. 41, pp. 112–18.10.1016/j.phpro.2013.03.058 ↗
32. Y. Quan, Z. Chen, X. Gong, and Z. Yu: Mater Charact, 2008, vol. 59, pp. 1491–97.10.1016/j.matchar.2008.01.010 ↗
33. J.F. Lancaster: Metallurgy of Welding, Elsevier, Amsterdam, 1999.10.1533/9781845694869 ↗
34. F. Xing, F. Guo, J. Su, X. Zhao, and H. Cai: Mater. Res. Exp., 2021, vol. 8, 066516.10.1088/2053-1591/ac083c ↗
35. J. Liang, Z. Lei, X. Qiu, F. Xing, X. Zhang, Y. Ruan, and J. Su: J. Market. Res., 2024, vol. 30, pp. 6366–75.
36. J. Robson and C. Paa-Rai: Acta Mater., 2015, vol. 95, pp. 10–19.10.1016/j.actamat.2015.05.012 ↗
37. G. Morozova, V. Tikhonova, and N. Lashko: Met. Sci. Heat Treat., 1978, vol. 20, pp. 657–60.10.1007/BF00780803 ↗
38. D. StJohn, M. Qian, M. Easton, and P. Cao: Acta Mater., 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
39. R. Brooke, D. Zhang, D. Qiu, M.A. Gibson, and M. Easton: Nat. Commun., 2025, vol. 16, p. 5710.10.1038/s41467-025-60162-0 ↗
40. R. Deng, M. Mao, C. Zhao, C. Ouyang, R. Wei, H. Li, and H. Liu: Metall. Res. Technol., 2024, vol. 121, p. 402.10.1051/metal/2024038 ↗
41. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
42. D. Zhang, D. Qiu, S. Zhu, M. Dargusch, D. StJohn, and M. Easton: Scr. Mater., 2020, vol. 183, pp. 12–16.10.1016/j.scriptamat.2020.03.006 ↗
43. X. Xiao, Y. Fu, X. Ye, M. Cheng, and L. Song: Infrared Phys. Technol., 2022, vol. 120, 103996.10.1016/j.infrared.2021.103996 ↗
44. M. Cheng, X. Xiao, G. Luo, and L. Song: Opt. Laser Technol., 2021, vol. 142, 107137.10.1016/j.optlastec.2021.107137 ↗
45. X. Ye, Z. Suo, Z. Heng, B. Chen, Q. Wei, J. Umeda, K. Kondoh, and J. Shen: J. Magn. Alloys, 2024, vol. 12, pp. 1419–30.10.1016/j.jma.2023.01.021 ↗
46. S. Rui, Q. Han, X. Wang, S. Li, X. Ma, Y. Su, Z. Cai, D. Du, and H. Shi: Mater. Today Commun., 2021, vol. 27, 102445.10.1016/j.mtcomm.2021.102445 ↗
47. I. Serrano-Munoz, R. Fernández, R. Saliwan-Neumann, G. González-Doncel, and G. Bruno: Mater. Lett., 2023, vol. 337, 133978.10.1016/j.matlet.2023.133978 ↗
48. W. Sun, Y. Deng, H. Zhan, X. Zhou, Y. Yao, W. Liu, and G. Zeng: J. Alloy. Compd., 2024, vol. 970, 172434.10.1016/j.jallcom.2023.172434 ↗
49. Y. Chun, M. Battaini, C. Davies, and S. Hwang: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3473–87.10.1007/s11661-010-0410-4 ↗
50. Y. Minonishi, S. Ishioka, M. Koiwa, and S. Mobozumi: Phys. Status Solidi, 1982, vol. 71, pp. 253–58.10.1002/pssa.2210710130 ↗
51. V.I. Stolbov, V.V. Elsov, I.A. Oleinik, and V.F. Matyagin: Weld. Int., 1991, vol. 5, pp. 799–802.10.1080/09507119109447850 ↗
52. W. Baeslack, S. Savage, and F. Froes: J. Mater. Sci. Lett., 1986, vol. 5, pp. 935–39.10.1007/BF01729281 ↗
53. K.C. Phillips, H.H. Gandhi, E. Mazur, and S. Sundaram: Adv. Opt. Photon., 2015, vol. 7, pp. 684–712.10.1364/AOP.7.000684 ↗
54. W. Ren, F. Lu, R. Yang, X. Liu, and Z. Li: J. Mater. Process. Technol., 2015, vol. 226, pp. 214–20.10.1016/j.jmatprotec.2015.07.004 ↗
55. T. Clyne and G. Davies: Solidification and Casting of Metals, Metals Society, London, 1979, pp. 275–78.
56. E. Pujiyulianto, Suyitno, K. Rajagukguk, B. Arifvianto, L. Katgerman, F. Paundra, H. Yudistira, F. Nurullah, A. Muhyi, and M. Arif: Eng. Fail. Anal., 2023, vol. 152, 107501.10.1016/j.engfailanal.2023.107501 ↗
57. T. Clyne and G. Davies: Solidification and Casting of Metals: Proceedings of an International Conference on Solidification, Metals Society, London, 1979, pp. 275–78.
58. T. Clyne and G.J. Davies: Br. Foundrymen, 1975, vol. 68, pp. 238–44.
59. J. Song, F. Pan, B. Jiang, A. Atrens, M. Zhang, and Y. Lu: J. Magn. Alloys, 2016, vol. 4, pp. 151–72.10.1016/j.jma.2016.08.003 ↗
60. H. Hekmatjou and H. Naffakh-Moosavy: Opt. Laser Technol., 2018, vol. 103, pp. 22–32.10.1016/j.optlastec.2018.01.020 ↗
61. S. Yan, Z. Wang, and Z. Shan: J. Mater. Sci. Technol., 2025, vol. 211, pp. 171–78.10.1016/j.jmst.2024.05.050 ↗
62. S. Kumar, V. Gaur, and C. Wu: Int. J. Adv. Manuf. Technol., 2022, vol. 123, pp. 3737–65.10.1007/s00170-022-10403-z ↗
63. F. He, C. Wu, and L. Shi: J. Market. Res., 2023, vol. 27, pp. 2670–83.
64. X. Liu, J. Cai, J. Long, K. Guo, and Y. Wei: Mater Charact, 2024, vol. 207, 113540.10.1016/j.matchar.2023.113540 ↗
65. A. Krull, Tim-Oliver Buchholz, Florian Jug: Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition 2019, pp. 2129–37.