High-Entropy TiCrFeCoNi Alloy Coatings Synthesized by Pulsed Magnetron Sputtering and Cathodic Arc Plasma Deposition
Source abstract
Abstract
Abstract This study investigates the structural and mechanical properties of TiCrFeCoNi high-entropy alloy coatings synthesized using pulsed magnetron sputtering (PMS) and cathodic arc plasma deposition (Arc-PVD) on 304L stainless steel, molybdenum, Armco iron, and Si(100) substrates. PMS coatings exhibited uniform amorphous structures across all conditions, with thicknesses of 580–610 nm and hardness up to 9.39 GPa. Arc-PVD coatings, with thicknesses from ~ 600 nm to > 4 µm depending on current and time, ranged from amorphous to polycrystalline; cyclic deposition promoted crystallization, forming FCC, B2, and Laves phases. Arc-PVD coatings achieved a maximum hardness of 10.40 GPa and reduced Young’s modulus ( E r ) of 203.96 GPa, while PMS coatings showed superior wear resistance at low modulation frequencies ( H / E r = 0.08; H 3 / E r 2 = 0.05 GPa). Wear resistance correlated with H / E r and H 3 / E r 2 ratios, and structural features were strongly dependent on deposition parameters and substrate type. These findings clarify the link between process conditions, substrate effects, and performance, enabling tailored HEA coatings for advanced industrial applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 213–18. https://doi.org/10.1016/j.msea.2003.10.257.10.1016/j.msea.2003.10.257 ↗
2. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303. https://doi.org/10.1002/adem.200300567.10.1002/adem.200300567 ↗
3. F. Haftlang and H.S. Kim: Mater. Des., 2021, vol. 211, 110161https://doi.org/10.1016/j.matdes.2021.110161.10.1016/j.matdes.2021.110161 ↗
4. S. Sinha, S.S. Nene, M. Frank, K. Liu, R.S. Mishra, B.A. McWilliams, and K.C. Cho: Materialia (Oxf), 2019, vol. 6, 100310https://doi.org/10.1016/j.mtla.2019.100310.10.1016/j.mtla.2019.100310 ↗
5. I. Basu and JTh.M. De Hosson: Scr. Mater., 2020, vol. 187, pp. 148–56. https://doi.org/10.1016/j.scriptamat.2020.06.019.10.1016/j.scriptamat.2020.06.019 ↗
6. A.S. Ang, B.S. Murty, J.W. Yeh, P. Munroe, and C.C.J. Berndt: Thermal Spray Technol., 2022, vol. 31(4), pp. 920–22.10.1007/s11666-022-01398-w ↗
7. H. Zhao, Z. Zheng, H. Zhou, L. Chang, K. Tsoutas, L. Yang, S.K. Alavi, Y. Liu, B. Akhavan, M.M. Bilek, and Z. Liu: Surf. Interfaces, 2023, vol. 37, 102692https://doi.org/10.1016/j.surfin.2023.102692.10.1016/j.surfin.2023.102692 ↗
8. N.I. Muhammad Nadzri, D.S.C. Halin, M.M. Al Bakri Abdullah, S. Joseph, M.A.A. Mohd Salleh, P. Vizureanu, D.-P. Burduhos-Nergis, and A.V. Sandu: Coatings, 2022, vol. 12, p. 1842. https://doi.org/10.3390/coatings12121842.10.3390/coatings12121842 ↗
9. M. Muhammed, M. Javidani, T. Ebrahimi Sadrabadi, M. Heidari, T. Levasseur, and M. Jahazi: Coatings, 2024, vol. 14, p. 246. https://doi.org/10.3390/coatings14030246.10.3390/coatings14030246 ↗
10. S. Alvi, D.M. Jarzabek, M.G. Kohan, D. Hedman, P. Jenczyk, M.M. Natile, A. Vomiero, and F. Akhtar: ACS Appl. Mater. Interfaces, 2020, vol. 12, pp. 21070–79. https://doi.org/10.1021/acsami.0c02156.10.1021/acsami.0c02156 ↗
11. G. Prabu and M. Duraiselvam: Arch. Metall. Mater., 2021, https://doi.org/10.24425/amm.2022.137772.10.24425/amm.2022.137772 ↗
12. V.M. Nadutov, A.V. Proshak, S.Y. Makarenko, V.Y. Panarin, and M.Y. Svavil’nyj: Mater. Werksttech, 2016, vol. 47, pp. 272–77. https://doi.org/10.1002/mawe.201600489.10.1002/mawe.201600489 ↗
13. M.-H. Shiao and F.-S. Shieu: Thin Solid Films, 2001, vol. 386, pp. 27–31. https://doi.org/10.1016/S0040-6090(00)01918-0.10.1016/S0040-6090(00)01918-0 ↗
14. R.R. Aharonov, M. Chhowalla, S. Dhar, and R.P. Fontana: Surf. Coat. Technol., 1996, vol. 82, pp. 334–43. https://doi.org/10.1016/0257-8972(95)02773-4.10.1016/0257-8972(95)02773-4 ↗
15. P. Panjan, A. Drnovšek, P. Gselman, M. Čekada, and M. Panjan: Coatings, 2020, vol. 10, p. 447. https://doi.org/10.3390/coatings10050447.10.3390/coatings10050447 ↗
16. K. Yurdal, İH. Karahan, and E. Ünal: JOM, 2025, https://doi.org/10.1007/s11837-025-07342-x.10.1007/s11837-025-07342-x ↗
17. A. Jansson, L.Z. Medina, L. Lautrup, and U. Jansson: Surf. Coat. Technol., 2023, vol. 466, 129612https://doi.org/10.1016/j.surfcoat.2023.129612.10.1016/j.surfcoat.2023.129612 ↗
18. M. El Garah, D. Soubane, and F. Sanchette: Emergent Mater, 2024, vol. 7, pp. 77–101. https://doi.org/10.1007/s42247-023-00607-8.10.1007/s42247-023-00607-8 ↗
19. K. Nowakowska-Langier, L. Skowronski, R. Chodun, S. Okrasa, G.W. Strzelecki, M. Wilczopolska, B. Wicher, R. Mirowski, and K. Zdunek: Thin Solid Films, 2020, https://doi.org/10.1016/j.tsf.2019.137731.10.1016/j.tsf.2019.137731 ↗
20. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83. https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564 ↗
21. G.W. Strzelecki, K. Nowakowska-Langier, K. Namyślak, K. Mulewska, M. Wilczopolska, R. Minikayev, M. Nadolski, S. Okrasa, S. Romaniuk, and K. Zdunek: Metall. Mater. Trans. A, 2024, https://doi.org/10.1007/s11661-024-07643-x.10.1007/s11661-024-07643-x ↗
22. B. Wicher, R. Chodun, K. Nowakowska-Langier, S. Okrasa, K. Król, R. Minikayev, G. Strzelecki, and K. Zdunek: Arch. Metall. Mater., 2018, vol. 63, pp. 1339–44.10.24425/123809 ↗
23. G.W. Strzelecki, K. Nowakowska-Langier, K. Mulewska, M. Zieliński, A. Kosińska, S. Okrasa, M. Wilczopolska, R. Chodun, B. Wicher, R. Mirowski, and K. Zdunek: Surf. Coat. Technol., 2022, vol. 446, 128802https://doi.org/10.1016/j.surfcoat.2022.128802.10.1016/j.surfcoat.2022.128802 ↗
24. G.W. Strzelecki, K. Nowakowska-Langier, R. Chodun, S. Okrasa, B. Wicher, and K. Zdunek: Mater. Sci.-Pol., 2018, vol. 36, pp. 697–703. https://doi.org/10.2478/msp-2018-0078.10.2478/msp-2018-0078 ↗
25. S. Romaniuk, K. Nowakowska-Langier, G.W. Strzelecki, K. Mulewska, and R. Minikayev: Coatings, 2024, vol. 14, p. 844. https://doi.org/10.3390/coatings14070844.10.3390/coatings14070844 ↗
26. K. Nowakowska-Langier, K. Zdunek, R. Chodun, R. Nietubyć, R. Mirowski, and J. Witkowski: Sci. Technol., 2010, vol. 6, pp. 159–61.
27. H.-K. Tsou, M.-H. Chi, Y.-W. Hung, C.-J. Chung, and J.-L. He: Biomed. Res. Int., 2015, vol. 2015, pp. 1–9. https://doi.org/10.1155/2015/328943.10.1155/2015/328943 ↗
28. H. Tsou, P. Hsieh, M. Chi, C. Chung, and J. He: J. Biomed. Mater. Res. A, 2012, vol. 100A, pp. 2787–92. https://doi.org/10.1002/jbm.a.34215.10.1002/jbm.a.34215 ↗
29. A. Anders: Cathodic Arcs, Springer, New York, 2008.10.1007/978-0-387-79108-1 ↗
30. M. Tkadletz, C. Mitterer, B. Sartory, I. Letofsky-Papst, C. Czettl, and C. Michotte: Surf. Coat. Technol., 2014, vol. 257, pp. 95–101. https://doi.org/10.1016/j.surfcoat.2014.01.010.10.1016/j.surfcoat.2014.01.010 ↗
31. M. Pohler, R. Franz, J. Ramm, P. Polcik, and C. Mitterer: Surf. Coat. Technol., 2011, vol. 206, pp. 1454–60. https://doi.org/10.1016/j.surfcoat.2011.09.028.10.1016/j.surfcoat.2011.09.028 ↗
32. D.M. Holzapfel, Z. Czigány, A.O. Eriksson, M. Arndt, and J.M. Schneider: Appl. Surf. Sci., 2021, vol. 553, p. 149527. https://doi.org/10.1016/j.apsusc.2021.149527.10.1016/j.apsusc.2021.149527 ↗
33. M. Morinaga: Key Eng. Mater., 2018, vol. 770, pp. 217–23. https://doi.org/10.4028/www.scientific.net/KEM.770.217.10.4028/www.scientific.net/KEM.770.217 ↗
34. A. Sharma, Z. Duriagina, S. Kumar, eds., Engineering Steels and High Entropy-Alloys, IntechOpen, 2020. https://doi.org/10.5772/intechopen.84991.10.5772/intechopen.84991 ↗
35. A. Debski, R. Debski, and W. Gasior: Arch. Metall. Mater., 2014, vol. 59, pp. 1337–43. https://doi.org/10.2478/amm-2014-0228.10.2478/amm-2014-0228 ↗
36. T.-T. Shun, L.-Y. Chang, and M.-H. Shiu: Mater. Sci. Eng. A, 2012, vol. 556, pp. 170–74. https://doi.org/10.1016/j.msea.2012.06.075.10.1016/j.msea.2012.06.075 ↗
37. B.S. Murty, J.W. Yeh, S. Ranganathan, Intermetallics, Interstitial Compounds and Metallic Glasses in High-Entropy Alloys, in: High Entropy Alloys, Elsevier, Amsterdam, 2014: pp. 119–131. https://doi.org/10.1016/B978-0-12-800251-3.00007-9.10.1016/B978-0-12-800251-3.00007-9 ↗
38. J. Li, D. Ouyang, Q. Wang, Q. Teng, C. Cai, and Q. Wei: Mater. Sci. Eng. A, 2023, vol. 886, p. 145649. https://doi.org/10.1016/j.msea.2023.145649.10.1016/j.msea.2023.145649 ↗
39. L. Jiang, Y. Lu, Y. Dong, T. Wang, Z. Cao, and T. Li: Intermetallics (Barking), 2014, vol. 44, pp. 37–43. https://doi.org/10.1016/j.intermet.2013.08.016.10.1016/j.intermet.2013.08.016 ↗
40. M. Luebbe, F. Zhang, J.D. Poplawsky, J. Duan, and H. Wen: J. Alloys Compds., 2024, vol. 1007, p. 176384.10.1016/j.jallcom.2024.176384 ↗
41. C.-Y. Hsu, C.-C. Juan, W.-R. Wang, T.-S. Sheu, J.-W. Yeh, and S.-K. Chen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3581–88. https://doi.org/10.1016/j.msea.2011.01.072.10.1016/j.msea.2011.01.072 ↗
42. M.-H. Tsai, K.-Y. Tsai, C.-W. Tsai, C. Lee, C.-C. Juan, and J.-W. Yeh: Mater. Res. Lett., 2013, vol. 1, pp. 207–12. https://doi.org/10.1080/21663831.2013.831382.10.1080/21663831.2013.831382 ↗
43. M.-H. Tsai, K.-C. Chang, J.-H. Li, R.-C. Tsai, and A.-H. Cheng: Mater. Res. Lett., 2016, vol. 4, pp. 90–95. https://doi.org/10.1080/21663831.2015.1121168.10.1080/21663831.2015.1121168 ↗
44. M.-H. Chuang, M.-H. Tsai, C.-W. Tsai, N.-H. Yang, S.-Y. Chang, J.-W. Yeh, S.-K. Chen, and S.-J. Lin: J. Alloys Compd., 2013, vol. 551, pp. 12–18. https://doi.org/10.1016/j.jallcom.2012.09.133.10.1016/j.jallcom.2012.09.133 ↗
45. Z. Wang, Y. Huang, Y. Yang, J. Wang, and C.T. Liu: Scr. Mater., 2015, vol. 94, pp. 28–31. https://doi.org/10.1016/j.scriptamat.2014.09.010.10.1016/j.scriptamat.2014.09.010 ↗
46. L. Montanaro, C.R. Arciola, D. Campoccia, and M. Cervellati: Biomaterials, 2002, vol. 23, pp. 3651–59. https://doi.org/10.1016/S0142-9612(02)00098-4.10.1016/S0142-9612(02)00098-4 ↗
47. V. Melčová, Š Krobot, J. Šindelář, E. Šebová, M.K. Rampichová, and R. Přikryl: Results Surf. Interfaces, 2024, vol. 16, 100271https://doi.org/10.1016/j.rsurfi.2024.100271.10.1016/j.rsurfi.2024.100271 ↗
48. S. Yeniyol, B. Kepenek, A. Bilir, A.F. Çakır, N. Bölükbaşı, M. Yeniyol, and T. Özdemir: Mater. Sci. Appl., 2014, vol. 05, pp. 245–57. https://doi.org/10.4236/msa.2014.55029.10.4236/msa.2014.55029 ↗
49. A.L. Greer: Science, 1979, vol. 267(1995), pp. 1947–53. https://doi.org/10.1126/science.267.5206.1947.10.1126/science.267.5206.1947 ↗