Effect of Substrate Roughness on the Tribological Performance of AlTiN/AlTiCrN-Coated A8 Tool Steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. M. Muhammed, M. Javidani, M. Heidari, and M. Jahazi: Metals, 2023, pp. 1–30. https://doi.org/10.3390/met13081460.10.3390/met13081460 ↗
2. M.M. Al-Asadi and H.A. Al-Tameemi: Tribol. Int., 2022, vol. 176, pp. 1–17. https://doi.org/10.1016/j.triboint.2022.107919.10.1016/j.triboint.2022.107919 ↗
3. B. Warcholinski and A. Gilewicz: Appl. Sci., 2022, vol. 12, pp. 1–19. https://doi.org/10.3390/app122010389.10.3390/app122010389 ↗
4. M. Muhammed, M. Javidani, T. Ebrahimi Sadrabadi, M. Heidari, T. Levasseur, and M. Jahazi: Coatings, 2024, vol. 14, p. 246. https://doi.org/10.3390/coatings14030246.10.3390/coatings14030246 ↗
5. M.L. Kuruppu, G. Negrea, I.P. Ivanov, and S.L. Rohde: J. Vac. Sci. Technol. A Vacuum Surf. Film., 1998, vol. 16, pp. 1949–55. https://doi.org/10.1116/1.581202.10.1116/1.581202 ↗
6. Y. Kong, X. Tian, C. Gong, and P.K. Chu: Surf. Coatings Technol., 2018, vol. 344, pp. 204–13. https://doi.org/10.1016/j.surfcoat.2018.03.027.10.1016/j.surfcoat.2018.03.027 ↗
7. B. Warcholinski and A. Gilewicz: Wear, 2011, vol. 271, pp. 2812–20. https://doi.org/10.1016/j.wear.2011.05.048.10.1016/j.wear.2011.05.048 ↗
8. Y.Y. Chang, Y.J. Yang, and S.Y. Weng: Surf. Coatings Technol., 2020, vol. 389, p. 125637. https://doi.org/10.1016/j.surfcoat.2020.125637.10.1016/j.surfcoat.2020.125637 ↗
9. D. Özkan, M.A. Yılmaz, M. Szala, C. Türküz, D. Chocyk, C. Tunç, O. Göz, M. Walczak, K. Pasierbiewicz, and M.B. Yağcı: Ceram. Int., 2021, vol. 47, pp. 20077–89. https://doi.org/10.1016/j.ceramint.2021.04.015.10.1016/j.ceramint.2021.04.015 ↗
10. M. Muhammed, M. Javidani, T. EbrahimiSadrabadi, M. Heidari, T. Levasseur, and M. Jahazi: Metall. Mater. Trans. A, 2025, vol. 56, pp. 2513–36. https://doi.org/10.1007/s11661-025-07802-8.10.1007/s11661-025-07802-8 ↗
11. B.S. Johny and M. Alphonse: Tribol. Mater., 2024, vol. 3, pp. 131–40. https://doi.org/10.46793/tribomat.2024.015.10.46793/tribomat.2024.015 ↗
12. G. Kostadinov, T. Penyashki, A. Nikolov, and A. Vencl: Materials (Basel), 2024, vol. 17, p. 382. https://doi.org/10.3390/ma17020382.10.3390/ma17020382 ↗
13. B. Warcholinski and A. Gilewicz: Vacuum, 2013, vol. 90, pp. 145–50. https://doi.org/10.1016/j.vacuum.2012.04.039.10.1016/j.vacuum.2012.04.039 ↗
14. A. Mubarak, P. Akhter, E. Hamzah, M. Radzi, H.M. Toff, and I.A. Qazi: Surf. Rev. Lett., 2008, vol. 15, pp. 401–10.10.1142/S0218625X08011524 ↗
15. R.X. Huang, Z.B. Qi, P. Sun, Z.C. Wang, and C.H. Wu: Phys. Procedia, 2011, vol. 18, pp. 160–67. https://doi.org/10.1016/j.phpro.2011.06.075.10.1016/j.phpro.2011.06.075 ↗
16. C.L. Ling, M.A. Yajid, M.N. Tamin, M. Kamarudin, M.A. Taib, N. Nosbi, and W.F. Ali: Surf. Coatings Technol., 2022, vol. 436, p. 128304. https://doi.org/10.1016/j.surfcoat.2022.128304.10.1016/j.surfcoat.2022.128304 ↗
17. L. Zou, F. Mei, H. Zhang, X. Lin, Y. Wang, T. Yuan, Y. Chen, and J. Gao: Ceram. Int., 2022, vol. 48, pp. 2555–65. https://doi.org/10.1016/j.ceramint.2021.10.038.10.1016/j.ceramint.2021.10.038 ↗
18. G.M. Uddin, A.A. Khan, M. Ghufran, Z.U. Tahir, M. Asim, M. Sagheer, M. Jawad, J. Ahmad, M. Irfan, and B. Waseem: Adv. Mech. Eng., 2018, vol. 10, pp. 1–10. https://doi.org/10.1177/1687814018802882.10.1177/1687814018802882 ↗
19. A. Vencl: J. Balk. Tribol. Assoc., 2012, vol. 18, pp. 405–14.
20. N. Ravi, R. Markandeya, and S.V. Joshi: Surf. Eng., 2017, vol. 33, pp. 7–19. https://doi.org/10.1179/1743294415Y.0000000005.10.1179/1743294415Y.0000000005 ↗
21. N.A. Fountas, R. Kudelski, and N.M. Vaxevanidis: Tribol. Mater., 2025, vol. 4, pp. 9–17. https://doi.org/10.46793/tribomat.2025.004.10.46793/tribomat.2025.004 ↗
22. D.M. Mattox: Elsevier Sci. Technol. Books, 2007, pp. 127–236. https://doi.org/10.1016/c2009-0-18800-1.10.1016/c2009-0-18800-1 ↗
23. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75. https://doi.org/10.1038/nmeth.2089.10.1038/nmeth.2089 ↗
24. S. Gražulis, A. Daškevič, A. Merkys, D. Chateigner, L. Lutterotti, M. Quiros, N.R. Serebryanaya, P. Moeck, R.T. Downs, and A. Le Bail: Nucleic Acids Res., 2012, vol. 40, pp. 420–27. https://doi.org/10.1093/nar/gkr900.10.1093/nar/gkr900 ↗
25. ASTM G65-04: Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus, ASTM International, West Conshohocken, PA, 2010, pp. 1–12. https://doi.org/10.1520/G0065-04R10.10.1520/G0065-04R10 ↗
26. M. Muhammed, M. Javidani, T. Ebrahimi Sadrabadi, M. Heidari, T. Levasseur, and M. Jahazi: J. Mater. Eng. Perform., 2025, https://doi.org/10.1007/s11665-025-12019-2.10.1007/s11665-025-12019-2 ↗
27. F.H.G. Colaço and G. Pintaude: Tribol. Lett., 2022, vol. 70, pp. 1–13. https://doi.org/10.1007/s11249-022-01590-7.10.1007/s11249-022-01590-7 ↗
28. A. Vencl: J. Therm. Spray Technol., 2015, vol. 24, pp. 671–82. https://doi.org/10.1007/s11666-014-0202-2.10.1007/s11666-014-0202-2 ↗
29. S. Wu, Y. Zhao, L. Zhang, S. Liu, L. Qin, B. Liao, X. Zhang, L. Chen, and T. Zhang: Vacuum, 2022, vol. 201, p. 111093. https://doi.org/10.1016/j.vacuum.2022.111093.10.1016/j.vacuum.2022.111093 ↗
30. A. Anders: Cathodic arc plasma deposition: From fractal spots to energetic condensation, vol. 50, Springer, New York, 2008, pp. 265–298.10.1007/978-0-387-79108-1_6 ↗
31. V.D. Ovcharenko, A.S. Kuprin, G.N. Tolmachova, I.V. Kolodiy, A. Gilewicz, O. Lupicka, J. Rochowicz, and B. Warcholinski: Vacuum, 2015, vol. 117, pp. 27–34. https://doi.org/10.1016/j.vacuum.2015.04.008.10.1016/j.vacuum.2015.04.008 ↗
32. A.R. Naghashzadeh, A. Shafyei, and F. Sourani: J. Mater. Eng. Perform., 2022, vol. 31, pp. 4335–42. https://doi.org/10.1007/s11665-021-06533-2.10.1007/s11665-021-06533-2 ↗
33. J. Takadoum and H. Houmid Bennani: Surf. Coatings Technol., 1997, vol. 96, pp. 272–82. https://doi.org/10.1016/S0257-8972(97)00182-5.10.1016/S0257-8972(97)00182-5 ↗
34. J.A. Thornton: J. Vac. Sci. Technol., 1974, vol. 11, pp. 666–70. https://doi.org/10.1116/1.1312732.10.1116/1.1312732 ↗
35. A. Pak, M. Masoudi, and H. Elmkhah: Surf. Interf., 2022, vol. 28, p. 101618. https://doi.org/10.1016/j.surfin.2021.101618.10.1016/j.surfin.2021.101618 ↗
36. S.S. Lin, K.S. Zhou, M.J. Dai, F. Hu, Q. Shi, H.J. Hou, C.B. Wei, F.Q. Li, and X. Tong: Trans. Nonferrous Met. Soc. China (English Ed.), 2015, vol. 25, pp. 451–56. https://doi.org/10.1016/S1003-6326(15)63623-8.10.1016/S1003-6326(15)63623-8 ↗
37. A.J. Kendall and M.T. Mock: Eur. J. Inorg. Chem., 2020, vol. 2020, pp. 1358–75. https://doi.org/10.1002/ejic.201901257.10.1002/ejic.201901257 ↗
38. M. Lahouij, N. Jaghar, O. Abegunde, H. Larhlimi, M. Makha, and J. Alami: J. Mater. Eng. Perform., 2024, pp. 1–14. https://doi.org/10.1007/s11665-024-09640-y.10.1007/s11665-024-09640-y ↗
39. A. Vaitkus, A. Merkys, T. Sander, M. Quirós, P.A. Thiessen, E.E. Bolton, and S. Gražulis: J. Cheminform., 2023, vol. 15, pp. 1–15. https://doi.org/10.1186/s13321-023-00780-2.10.1186/s13321-023-00780-2 ↗
40. M. Falsafein, F. Ashrafizadeh, and A. Kheirandish: Surf. Interf., 2018, vol. 13, pp. 178–85. https://doi.org/10.1016/j.surfin.2018.09.009.10.1016/j.surfin.2018.09.009 ↗
41. B.D. Cullity and S.R. Stock: Phys. Today, 1957, vol. 10, p. 50.10.1063/1.3060306 ↗
42. M. Danek, F. Fernandes, A. Cavaleiro, and T. Polcar: Surf. Coatings Technol., 2017, vol. 313, pp. 158–67. https://doi.org/10.1016/j.surfcoat.2017.01.053.10.1016/j.surfcoat.2017.01.053 ↗
43. B. Gui, H. Zhou, J. Zheng, X. Liu, X. Feng, Y. Zhang, and L. Yang: Ceram. Int., 2021, vol. 47, pp. 8175–83. https://doi.org/10.1016/j.ceramint.2020.11.175.10.1016/j.ceramint.2020.11.175 ↗
44. L. Wang, S. Zhang, Z. Chen, J. Li, and M. Li: Appl. Surf. Sci., 2012, vol. 258, pp. 3629–36. https://doi.org/10.1016/j.apsusc.2011.11.127.10.1016/j.apsusc.2011.11.127 ↗
45. ASTM E2546-15:Standard Practice for Instrumented Indentation Testing, 2015, pp. 1–24. https://doi.org/10.1520/E2546-15.10.1520/E2546-15 ↗
46. Y. Zhao, K. Liu, H. Zhang, X. Tian, Q. Jiang, V. Murugadoss, and H. Hou: Adv. Compos. Hybrid Mater., 2022, vol. 5, pp. 2546–56. https://doi.org/10.1007/s42114-022-00522-2.10.1007/s42114-022-00522-2 ↗
47. Y. Meng, J. Deng, Y. Lu, S. Wang, J. Wu, and W. Sun: Appl. Surf. Sci., 2021, vol. 550, p. 149394. https://doi.org/10.1016/j.apsusc.2021.149394.10.1016/j.apsusc.2021.149394 ↗
48. R. Akhter, Z. Zhou, Z. Xie, and P. Munroe: Appl. Surf. Sci., 2021, vol. 541, p. 148533. https://doi.org/10.1016/j.apsusc.2020.148533.10.1016/j.apsusc.2020.148533 ↗
49. L.A. Dobrzański, L.W. Zukowska, J. Mikuła, K. Gołombek, D. Pakuła, and M. Pancielejko: J. Mater. Process. Technol., 2008, vol. 201, pp. 310–14. https://doi.org/10.1016/j.jmatprotec.2007.11.283.10.1016/j.jmatprotec.2007.11.283 ↗
50. L. Yang, M. Zhao, T.M. Chan, F. Shang, and D. Xu: J. Constr. Steel Res., 2016, vol. 122, pp. 339–53. https://doi.org/10.1016/j.jcsr.2016.04.007.10.1016/j.jcsr.2016.04.007 ↗
51. S.C. Lee, W.Y. Ho, and F.D. Lai: Mater. Chem. Phys., 1996, vol. 43, pp. 266–73. https://doi.org/10.1016/0254-0584(95)01636-9.10.1016/0254-0584(95)01636-9 ↗
52. Y. Chen, Z. Zhang, T. Yuan, F. Mei, X. Lin, J. Gao, W. Chen, and Y. Xu: Surf. Coatings Technol., 2021, vol. 412, p. 127082. https://doi.org/10.1016/j.surfcoat.2021.127082.10.1016/j.surfcoat.2021.127082 ↗
53. A. Ostadi, S.H. Hosseini, and M.E. Fordoei: Ceram. Int., 2020, vol. 46, pp. 2287–93. https://doi.org/10.1016/j.ceramint.2019.09.217.10.1016/j.ceramint.2019.09.217 ↗
54. Y. Xie and H.M. Hawthorne: Surf. Coatings Technol., 2001, vol. 141, pp. 15–25. https://doi.org/10.1016/S0257-8972(01)01130-6.10.1016/S0257-8972(01)01130-6 ↗
55. M. Scholl: Wear, 1997, vol. 203–204, pp. 57–64. https://doi.org/10.1016/S0043-1648(96)07408-X.10.1016/S0043-1648(96)07408-X ↗
56. E. Rabinowicz, L.A. Dunn, and P.G. Russell: Wear, 1961, vol. 4, pp. 345–55. https://doi.org/10.1016/0043-1648(61)90002-3.10.1016/0043-1648(61)90002-3 ↗
57. B. Bhushan and P.L. Ko: Appl. Mech. Rev., 2003, vol. 56, pp. B6–B7. https://doi.org/10.1115/1.1523360.10.1115/1.1523360 ↗