journal article·2025-11Open access

Creep Behavior and Model Comparison for Ti–6Al–4V Alloy Produced via Electron Beam Powder Bed Fusion

M. Bruno, L. Esposito, I. di Criscio, R. Borrelli, S. Franchitti

Abstract

Abstract In the present study, the creep behavior of Ti–6Al–4V alloy, produced by electron beam powder bed fusion (EB-PBF), was analyzed within a range of temperatures and stress levels suitable for aerospace applications related to structural parts of orbital re-entry vehicles. The experimental data revealed a negligible primary creep and a smooth transition between the secondary and tertiary stages, leading to a pseudo-tertiary regime. Experimental steady-state creep rates were used to calibrate and assess the predictive capabilities of some models available in the literature. The Norton’s model, characterized by constant stress exponent n, fails to accurately predict the creep rate over the considered stress levels. A more reliable prediction of the material’s creep response was achieved using a mechanism-based model with higher-order non-linearity, as proposed by Esposito et al. The model predictions closely match experimental data, improving the understanding of the mechanical properties of titanium alloys produced by electron beam melting. The creep performance of Ti–6Al–4V produced by electron beam melting and selective laser melting were compared using the Larson–Miller approach. This research underscores the significance of combining experimental analysis with computational modeling to drive advancements in materials science.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213(1), pp. 103–14.10.1016/0921-5093(96)10233-1 ↗
2. M. Peters, J. Kumpfert, C.H. Ward, and C. Leyens: Adv. Eng. Mater., 2003, vol. 5(6), pp. 419–27.10.1002/adem.200310095 ↗
3. O. Ochonogor, E.T. Akinlabi, and D. Nyembwe: Mater. Today, 2017, vol. 4(2), pp. 250–56.
4. S. Liu and Y.C. Shin: Mater. Des., 2019, vol. 164, 107552.10.1016/j.matdes.2018.107552 ↗
5. S. Rawal, J. Brantley, N. Karabudak, Additive manufacturing of ti-6al-4v alloy components for spacecraft applications, in: 2013 6th international conference on recent advances in space technologies (RAST),IEEE, 2013, pp. 5–11.10.1109/RAST.2013.6581260 ↗
6. A. Acquesta, T. Monetta, S. Franchitti, R. Borrelli, A. Viscusi, A.S. Perna, F. Penta, L. Esposito, and L. Carrino: J. Adv. Manuf. Technol., 2023, vol. 126, pp. 4269–82.10.1007/s00170-023-11400-6 ↗
7. P. Aliprandi, F. Giudice, E. Guglielmino, G. La Rosa, A. Sili, et al.: Metall. Ital, 2019, vol. 6, pp. 18–23.
8. D. Srinivasan and K. Ananth: J. Indian Inst. Sci., 2022, vol. 102(1), pp. 311–49.10.1007/s41745-022-00290-4 ↗
9. S. Franchitti, R. Borrelli, A. De Fenza, R. Fauci, M. D. S. Fumo, R. Gardi, G. Rufolo, Procedia Structural Integrity 53 (2024) 397–406, third European Conference on the Structural Integrity of Additively Manufactures Materials (ESIAM23). https://doi.org/10.1016/j.prostr.2024.01.046.10.1016/j.prostr.2024.01.046 ↗
10. L. Badea, M. Surand, J. Ruau, and B. Viguier: Univ. Polytech. Bucharest Sci. Bull. Ser. B, 2014, vol. 76(1), pp. 185–96.
11. M. Barboza, C.M. Neto, and C. Silva: Mater. Sci. Eng. A, 2004, vol. 369(1–2), pp. 201–09.10.1016/j.msea.2003.11.016 ↗
12. B. Derby and M. Ashby: Acta Metall., 1987, vol. 35(6), pp. 1349–53. https://doi.org/10.1016/0001-6160(87)90017-4.10.1016/0001-6160(87)90017-4 ↗
13. L. Esposito and N. Bonora: Trans. ASME, 2012, https://doi.org/10.1115/1.4006856.10.1115/1.4006856 ↗
14. O. Golan, A. Arbel, D. Eliezer, and D. Moreno: Mater. Sci. Eng. A, 1996, vol. 216(1), pp. 125–30. https://doi.org/10.1016/0921-5093(96)10400-7.10.1016/0921-5093(96)10400-7 ↗
15. N. Bonora and L. Esposito: J. Eng. Mater. Technol., 2010, vol. 132(2), 021013. https://doi.org/10.1115/1.4000822.10.1115/1.4000822 ↗
16. B. Dyson: J. Pressure Vessel Technol., 2000, vol. 122(3), pp. 281–96. https://doi.org/10.1115/1.556185.10.1115/1.556185 ↗
17. P. Lombardi, L. Cipolla, P. Folgarait, N. Bonora, and L. Esposito, Mater. Sci. Eng. A, 2009, vol. 510-11(C), 214–18. https://doi.org/10.1016/j.msea.2008.04.112.10.1016/j.msea.2008.04.112 ↗
18. B. Vrancken, L. Thijs, J.-P. Kruth, and J. Van Humbeeck: J. Alloy. Compd., 2012, vol. 541, pp. 177–85.10.1016/j.jallcom.2012.07.022 ↗
19. A. Ferrigno, F. Di Caprio, R. Borrelli, F. Auricchio, and A. Vigliotti: Materialia, 2019, vol. 5, 100232. https://doi.org/10.1016/j.mtla.2019.100232.10.1016/j.mtla.2019.100232 ↗
20. En iso 204:2018, international Organization for Standardization (2018).
21. ASTM International, Standard test methods for flow rate of metal powders using the hall flowmeter funnel, Standard B213, ASTM International (2017).
22. ASTM International, Standard test method for apparent density of free flowing metal powders using the hall flowmeter funnel, Standard B312, ASTM International (2021).
23. C. Bellini, F. Berto, R. Borrelli, V.D. Cocco, S. Franchitti, F. Iacoviello, L.P. Mocanu, and S.M.J. Razavi: Procedia Struct. Integrity, 2023, vol. 47, pp. 359–69.10.1016/j.prostr.2023.07.088 ↗
24. R. Borrelli, C. Bellini, F. Berto, V. Di Cocco, P. Foti, F. Iacoviello, L. Mocanu, C. Pirozzi, N. Razavi, and S. Franchitti: Prog. Addit. Manuf., 2024, vol. 9(5), pp. 1475–90.10.1007/s40964-023-00560-2 ↗
25. L. Esposito, N. Bonora, and G. De Vita: Procedia Struct. Integrity, 2016, vol. 2, pp. 927–33.10.1016/j.prostr.2016.06.119 ↗
26. L. Esposito, D. Boccaccini, G. Pucillo, and H. Frandsen: Mater. Sci. Eng. A, 2017, vol. 691, pp. 155–61.10.1016/j.msea.2017.03.050 ↗
27. K. Janghorban and S. Esmaeili: J. Mater. Sci., 1991, vol. 26, pp. 3362–65.10.1007/BF01124686 ↗
28. K. Deen, A. Farooq, I. Khan, C. Haque, A. Ali, M. Kamran, and A. Malik: Mater. High Temp., 2013, vol. 30, pp. 140–44.10.3184/096034013X13721961181536 ↗
29. A. P. Institute, A. S. of Mechanical Engineers, API 579-1/ASME FFS-1: Fitness-For-Service, American Petroleum Institute/American Society of Mechanical Engineers, latest edition available as of 2024 (2016).
30. S. Spigarelli, C. Paoletti, E. Cerri, E. Santecchia, and M. Cabibbo: Mater. Sci. Eng. A, 2022, vol. 860, 144278.10.1016/j.msea.2022.144278 ↗
31. L.M. Viespoli, S. Bressan, T. Itoh, N. Hiyoshi, K.G. Prashanth, and F. Berto: Eng. Fail. Anal., 2020, vol. 111, 104477.10.1016/j.engfailanal.2020.104477 ↗