Effect of Partial Austenitization Treatment on Microstructure and Mechanical Properties for Multiphase Steels
Source abstract
Abstract
In this study, the microstructural evolution and mechanical properties of a 0.15 pct C-2.09 pct Mn multiphase steel was investigated. To produce a multiphase microstructure, a newly developed two-step processing of partial austenitization and quenching (PAQ) treatment was used. In the first step, the steel with initial martensitic microstructure was partially austenitized at 690 °C for 8 hours. After cold rolling, a rapid reheating to 840 °C and quenching done to simulate hot dip galvanizing conditions. To better understand the PAQ process, thermodynamic and kinetic simulations using ThermoCalc and DICTRA predicted phase transformations and elemental partitioning. Microstructural characterization via LM, SEM, and EBSD revealed an ultrafine-grained multiphase structure consisting of bainite, M/A, and intercritical ferrite. The PAQ840 sample showed an ultimate tensile strength of 740 MPa and excellent ductility with 20 pct total elongation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. V.L. Nuam, H. Zhang, Y.C. Wang, and Z.P. Xiong: J. Iron Steel Res. Int., 2024, vol. 31, pp. 1–11.10.1007/s42243-023-01165-3 ↗
2. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229–36.10.1016/j.actamat.2014.10.052 ↗
3. D.W. Suh and S.J. Kim: Scripta Mater., 2017, vol. 126, pp. 63–67.10.1016/j.scriptamat.2016.07.013 ↗
4. S. Yu and Y.G. Deng: J. Mater. Eng. Performance., 2025. https://doi.org/10.1007/s11665-025-10669-w.10.1007/s11665-025-10669-w ↗
5. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8(3–4), pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
6. L. Wang and J.G. Speer: Metallogr. Microstruct. Anal., 2013, vol. 2, pp. 268–81.10.1007/s13632-013-0082-8 ↗
7. J.G. Speer, E. De Moor, and A.J. Clarke: Mater. Sci. Technol., 2015, vol. 31(1), pp. 3–9.10.1179/1743284714Y.0000000628 ↗
8. W.Q. Cao, C. Wang, J. Shi, M.Q. Wang, W.J. Hui, and H. Dong: Mater. Sci. Eng. A, 2011, vol. 528(22–23), pp. 6661–66.10.1016/j.msea.2011.05.039 ↗
9. A.G. Glover, J.G. Speer, and E. De Moor: in: Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels, vol. 30, Keystone, 2017.
10. Z.J. Xie, S.F. Yuan, W.H. Zhou, J.R. Yang, H. Guo, and C.J. Shang: Mater. Des., 2014, vol. 59, pp. 193–98.10.1016/j.matdes.2014.02.035 ↗
11. Y.B. Xu, Z.P. Hu, Y. Zou, X.D. Tan, D.T. Han, S.Q. Chen, and R.D.K. Misra: Mater. Sci. Eng. A, 2017, vol. 688, pp. 40–55.10.1016/j.msea.2017.01.063 ↗
12. D.T. Han, Y.B. Xu, F. Peng, Y. Zou, and R.D.K. Misra: J. Mater. Sci., 2020, vol. 55(10), pp. 4437–52.10.1007/s10853-019-04256-3 ↗
13. S. Luo and M. Liu: J. Mater. Eng. Perform., 2019, vol. 28, pp. 3063–75.10.1007/s11665-019-04075-2 ↗
14. S. Ghaemifar, H. Mirzadeh, M. Sarkari Khorrami, R. Soltani, and Z. Nasiri: Mater. Sci. Technol., 2020, vol. 36(15), pp. 1663–70.10.1080/02670836.2020.1818511 ↗
15. D. Das and P.P. Chattopadhyay: J. Mater. Sci., 2009, vol. 44, pp. 2957–65.10.1007/s10853-009-3392-0 ↗
16. E. Erişir and O.G. Bilir: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1055–61.10.1007/s11665-013-0848-9 ↗
17. E. Erişir and O.G. Bilir: JOM, 2016, vol. 68, pp. 203–09.10.1007/s11837-015-1673-4 ↗
18. A. Kalhor, A. Karimi Taheri, H. Mirzadeh, and V. Uthaisangsuk: Mater. Sci. Technol., 2021, vol. 37(6), pp. 561–91.10.1080/02670836.2021.1944524 ↗
19. A. Bag, K.K. Ray, and E.S. Dwarakadasa: Metall. Mater. Trans. A., 1999, vol. 30, pp. 1193–1202.10.1007/s11661-999-0269-4 ↗
20. J. Zhang, H. Di, Y. Deng, and R.D.K. Misra: Mater. Sci. Eng. A, 2015, vol. 627, pp. 230–40.10.1016/j.msea.2015.01.006 ↗
21. Y.G. Deng, H.S. Di, and J.C. Zhang: Acta Metall. Sinica (English Letters), 2015, vol. 28, pp. 1141–48.10.1007/s40195-015-0305-x ↗
22. M. Balbi, I. Alvarez-Armas, and A. Armas: Mater. Sci. Eng. A, 2018, vol. 733, pp. 1–8.10.1016/j.msea.2018.07.029 ↗
23. N. Saeidi, F. Ashrafizadeh, and B. Niroumand: Mater. Sci. Eng. A, 2014, vol. 599, pp. 145–49.10.1016/j.msea.2014.01.053 ↗
24. J.J. Mueller, X. Hu, X. Sun, Y. Ren, K. Choi, E. Barker, and E. De Moor: Mater. Des., 2021, vol. 203, p. 109598.10.1016/j.matdes.2021.109598 ↗
25. W.H. Zhou, X.L. Wang, P.K.C. Venkatsurya, H. Guo, C.J. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2014, vol. 607, pp. 569–77.10.1016/j.msea.2014.03.107 ↗
26. Z.J. Xie, C.J. Shang, S.V. Subramanian, X.P. Ma, and R.D.K. Misra: Scripta Mater., 2017, vol. 137, pp. 36–40.10.1016/j.scriptamat.2017.05.002 ↗
27. S. Liu, Z. Xiong, H. Guo, C. Shang, and R.D.K. Misra: Acta Mater., 2017, vol. 124, pp. 159–72.10.1016/j.actamat.2016.10.067 ↗
28. J. Speer, R. Rana, D. Matlock, A. Glover, G. Thomas, and E. De Moor: Metals, 2019, vol. 9(7), p. 771.10.3390/met9070771 ↗
29. R. Ding, Y. Yao, B. Sun, G. Liu, J. He, T. Li, et al.: Sci. Adv., 2020, vol. 6(13), p. eaay1430.10.1126/sciadv.aay1430 ↗
30. E. De Moor, A.G. Glover, J.J. Mueller, D.K. Matlock, and J.G. Speer: BHM Berg-und Hüttenmännische Monatshefte, 2022, vol. 167(11), pp. 522–25.10.1007/s00501-022-01295-3 ↗
31. P. Wen, S. Li, Y. Zhang, X. Wang, L. Li, and J. Guo: JOM, 2024, vol. 76(9), pp. 5557–68.10.1007/s11837-024-06748-3 ↗
32. Y. Wang, R. Ding, C. Franke, T. Li, X. Rong, P. Wen, et al.: Scripta Mater., 2024, vol. 242, p. 115923.10.1016/j.scriptamat.2023.115923 ↗
33. Y. Liu, S. Chu, H. Guo, M. Kong, C. Liu, J. Zhang, and Y. Liu: Acta Metall Sinica (English Letters), 2024, vol. 38, pp. 1–12.
34. Y. Wang, Y. Zhang, W. Gong, X. Rong, S. Harjo, W. Wu, et al.: Acta Mater., 2025, vol. 288, p. 120840.10.1016/j.actamat.2025.120840 ↗
35. S. Liu, J. Chai, X. Wan, Y. Wang, Z. Yang, S. Van Der Zwaag, and H. Chen: Mater. Sci. Eng. A, 2025, vol. 925, p. 147904.10.1016/j.msea.2025.147904 ↗
36. A. Borgenstam, L. Höglund, J. Ågren, and A. Engström: J. Phase Equilibria, 2000, vol. 21, pp. 269–80.10.1361/105497100770340057 ↗
37. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A., 2013, vol. 44, pp. 5018–24.10.1007/s11661-013-1860-2 ↗
38. ASTM E112-24: Standard test methods for determining average grain size, 2024.
39. ASTM E1245-03: Standard practice for determining the inclusion or second-phase constituent content of metals by automatic image analysis, 2023.
40. Metallic materials—Tensile testing—Part 1: Method of test at room temperature (ISO 6892-1:2019). German version EN ISO 6892-1, 2019
41. B. He: Materials, 2020, vol. 13(15), p. 3440.10.3390/ma13153440 ↗
42. R.D.M.C. Lima, J.C. Spadotto, F.T. dos Santos Tolomelli, and F.C.R. Assunção: Tecnologia em Metalurgia Materiais e Mineração, 2023, vol. 20, p. e2797.10.4322/2176-1523.20232797 ↗
43. A. Nagasaka, T. Hojo, M. Fujita, T. Ohashi, M. Miyasaka, Y. Shibayama, and E. Akiyama: ISIJ Int., 2021, vol. 61(6), pp. 1980–89.10.2355/isijinternational.ISIJINT-2020_719 ↗