journal article·2025-08Open access

Microstructure and Properties of FeCrAl Overlay Welds at High Temperature Service

M. A. Valiente Bermejo, M. Thuvander

Abstract

Abstract Recently developed FeCrAl alloys could be an economical alternative to nickel-based alloys in overlay welds for the power generation industry. However, more investigation on their microstructure and properties is needed at temperatures for boiler applications. This work compared the performance of three FeCrAl alloys (EF100, EF101, and APMT) as overlay welds, in as-deposited condition and after being exposed for 6 months in a CFB boiler’s evaporator tube bank. Bending, high temperature tensile test, restraint-cooling test, hardness, fractography, microscopy, microanalysis, and atom probe tomography (APT) were used. The results showed a ranking for ductility, being EF100 > EF101 > APMT. A high ductile-to-brittle transition temperature, below 100 °C, confirmed the low ductility and high cold cracking susceptibility. The microstructural analysis was in line with the previous grading. For APMT, APT showed that the exposure of the alloy at 400 °C for 11 days resulted in higher Cr concentration around carbides than in the matrix. This suggests that carbides could be initiation sites pushing toward the α-phase separation (Fe-rich vs Cr-rich), explaining the hardening and resulting in a drastic reduction in the ductility of APMT overlay welds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. F. Cherubini, S. Bargigli, and S. Ulgiati: Energy, 2009, vol. 34, pp. 2116–23.10.1016/j.energy.2008.08.023 ↗
2. L. Levaggi, R. Levaggi, C. Marchiori, and C. Trecroci: Sustainability, 2020, vol. 12, p. 5743.10.3390/su12145743 ↗
3. R.H.J.M. Gradus, P.H.L. Nillesen, E. Dijkgraaf, and R.J. van Koppen: Ecol. Econ., 2017, vol. 135, pp. 22–28.10.1016/j.ecolecon.2016.12.021 ↗
4. COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS Managing Climate Risks - Protecting People and Prosperity, 2024.
5. Kanthal® APM Wire — Kanthal®, https://www.kanthal.com/en/products/material-datasheets/wire/resistance-heating-wire-and-resistance-wire/kanthal-apm/, (accessed 17 December 2024).
6. Kanthal® APMT Tubes — Kanthal®, https://www.kanthal.com/en/products/material-datasheets/tube/kanthal-apmt/, (accessed 17 December 2024).
7. H. Worch: Cryst. Res. Technol., 1989, vol. 24, p. 378.10.1002/crat.2170240408 ↗
8. B. Jönsson and A. Westerlund: Oxid. Met., 2017, vol. 88, pp. 315–26.10.1007/s11085-016-9710-4 ↗
9. F.H. Stott, G.C. Wood, and J. Stringer: Oxid. Met., 1995, vol. 44, pp. 113–45.10.1007/BF01046725 ↗
10. K.G. Field, X. Hu, K.C. Littrell, Y. Yamamoto, and L.L. Snead: J. Nucl. Mater., 2015, vol. 465, pp. 746–55.10.1016/j.jnucmat.2015.06.023 ↗
11. K.G. Field, S.A. Briggs, K. Sridharan, R.H. Howard, and Y. Yamamoto: J. Nucl. Mater., 2017, vol. 489, pp. 118–28.10.1016/j.jnucmat.2017.03.038 ↗
12. K.G. Field, K.C. Littrell, and S.A. Briggs: Scr. Mater., 2018, vol. 142, pp. 41–45.10.1016/j.scriptamat.2017.08.022 ↗
13. M.N. Gussev, E. Cakmak, and K.G. Field: J. Nucl. Mater., 2018, vol. 504, pp. 221–33.10.1016/j.jnucmat.2018.03.036 ↗
14. X. Wu, T. Kozlowski, and J.D. Hales: Ann. Nucl. Energy, 2015, vol. 85, pp. 763–75.10.1016/j.anucene.2015.06.032 ↗
15. Y. Yamamoto, B.A. Pint, K.A. Terrani, K.G. Field, Y. Yang, and L.L. Snead: J. Nucl. Mater., 2015, vol. 467, pp. 703–16.10.1016/j.jnucmat.2015.10.019 ↗
16. H. Kinnunen, M. Hedman, D. Lindberg, S. Enestam, and P. Yrjas: Energy Fuels, 2019, vol. 33, pp. 5859–66.10.1021/acs.energyfuels.8b04168 ↗
17. Y. Alipour and P. Henderson: Corros. Eng. Sci. Technol., 2015, vol. 50, pp. 355–63.10.1179/1743278214Y.0000000228 ↗
18. Y. Alipour, A. Talus, P. Henderson, and R. Norling: Fuel Process. Technol., 2015, vol. 138, pp. 805–13.10.1016/j.fuproc.2015.07.014 ↗
19. J.R. Dupont, J.R. Regina, and K. Adams, eds.: in 21st Annual Conference on Fossil Energy Materials, Knoxville, Tennessee, 2007, pp. 132–37.
20. J.R. Regina, J.N. Dupont, and A.R. Marder: Weld. J., 2007, vol. 86, pp. 170s-78s.
21. W. Li, S. Lu, Q.-M. Hu, H. Mao, B. Johansson, and L. Vitos: Comput. Mater. Sci., 2013, vol. 74, pp. 101–06.10.1016/j.commatsci.2013.03.021 ↗
22. S. Kobayashi and T. Takasugi: Scr. Mater., 2010, vol. 63, pp. 1104–07.10.1016/j.scriptamat.2010.08.015 ↗
23. C. Capdevila, M.K. Miller, G. Pimentel, and J. Chao: Scr. Mater., 2012, vol. 66, pp. 254–57.10.1016/j.scriptamat.2011.11.003 ↗
24. C. Capdevila, M.K. Miller, K.F. Russell, J. Chao, and J.L. González-Carrasco: Mater. Sci. Eng. A, 2008, vol. 490, pp. 277–88.10.1016/j.msea.2008.01.029 ↗
25. J. Ejenstam, M. Thuvander, P. Olsson, F. Rave, and P. Szakalos: J. Nucl. Mater., 2015, vol. 457, pp. 291–97.10.1016/j.jnucmat.2014.11.101 ↗
26. M.F. Gittos, V. Kumar, and Q. Lu: Effect of iron content on metallurgical and corrosion properties of Ni-Cr-Mo alloy weld overlays, IIW Document II-2043-2017 Annual Assembly of the International Institute of Welding, Shanghai, July 2017.
27. C.C. Silva, H.C. de Miranda, M.F. Motta, J.P. Farias, C.R.M. Afonso, and A.J. Ramirez: J. Mater. Res. Technol., 2013, vol. 2, pp. 228–37.10.1016/j.jmrt.2013.02.008 ↗
28. J. Chao and C. Capdevila: Metals, 2020, vol. 10, p. 87.10.3390/met10010087 ↗
29. C.L. Jenney and A. O’Brien: Welding Handbook, vol. 1, 9th edn.
30. J. Lippold and D. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Wiley, Hoboken, 2005.
31. Q. Lu, W. Xu, and S. van der Zwaag: Comput. Mater. Sci., 2014, vol. 84, pp. 198–205.10.1016/j.commatsci.2013.12.009 ↗
32. T.G. Gooch, J.C.M. Farrar, and A.W. Marshall: Weld. World, 1995, vol. 35, pp. 248–54.
33. M.O. Malone: Weld. J., 1967, pp. 241s–53s.
34. T.J. Nichol, A. Datta, and G. Aggen: Metall. Trans. A, 1980, vol. 11, pp. 573–85.10.1007/BF02670694 ↗
35. Norling, Rikard, Hjörnhede, Anders, and Mattsson, Mattias: Long Term Testing of Materials for Tube Shielding, Stage 2., Värmeforsk Service AB, 2012.
36. M.A. Valiente Bermejo, A.M. Núñez, and R. Norling: Mater. Corros., 2024, vol. 75, pp. 950–64.10.1002/maco.202314124 ↗