The Influence of Overall Texture on the Grain Boundary Network in an AZ31 Alloy
Source abstract
Abstract
Abstract Three samples of an AZ31 alloy with distinct textures were produced through chill casting, hot extrusion and hot rolling. The as-cast material exhibited a relatively random texture, while the hot extruded and hot rolled materials displayed $$\left\{ {hki0} \right\}$$ prism and $$\left( {0001} \right)$$ basal textures, respectively. This also led to significant differences in the characteristics of their grain boundary networks (i.e., the distribution of misorientations and plane orientations). The misorientation angle distribution of as-cast condition was similar to a random distribution. However, the other processing routes were significantly different from random, displaying a pronounced peak at ~ 30 deg misorientation angle, beyond which the distribution differed depending on the processing condition. Synthetically generated orientations belonging to each texture had misorientation angle distributions comparable to those measured for each processing route. This confirmed that the texture characteristics dictate the population of boundary misorientations. The distribution of grain boundary planes was anisotropic for all conditions, though the extent of anisotropy and their distribution characteristics depended on the processing route. It appeared that the relative areas of the grain boundary planes are largely influenced by the characteristics of the overall texture, where the hot rolling process promoted the $$\left( {0001} \right)$$ basal plane orientation, while the $$\left\{ {hki0} \right\}$$ prismatic plane orientation, which does not necessarily have low energy, was dominant for the hot extrusion condition. Graphical Abstract
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. M.H. Yoo: Metall. Trans. A, 1981, vol. 12, pp. 409–18.10.1007/BF02648537 ↗
2. M.A. Meyers, O. Vohringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
3. L. Capolungo, P.E. Marshall, R.J. McCabe, I.J. Beyerlein, and C.N. Tome: Acta Mater., 2009, vol. 57, pp. 6047–56.10.1016/j.actamat.2009.08.030 ↗
4. H. Beladi, N.T. Nuhfer, and G.S. Rohrer: Acta Mater., 2014, vol. 70, pp. 281–89.10.1016/j.actamat.2014.02.038 ↗
5. H. Beladi and G.S. Rohrer: Acta Mater., 2013, vol. 61, pp. 1404–12.10.1016/j.actamat.2012.11.017 ↗
6. G.S. Rohrer, D.M. Saylor, B.E. Dasher, B.L. Adams, A.D. Rollett, and P. Wynblatt: Z. Met., 2004, vol. 95, pp. 197–214.
7. V. Shterner, I.B. Timokhina, A.D. Rollett, and H. Beladi: Metall. and Mater. Trans. A, 2018, vol. 49, pp. 2597–2611.10.1007/s11661-018-4606-3 ↗
8. I.J. Beyerlein, L. Capolungo, P.E. Marshall, R.J. McCabe, and C.N. Tome: Philos. Mag., 2010, vol. 90, pp. 2161–90.10.1080/14786431003630835 ↗
9. T. Watanabe: Trans. Japan Inst. Metals, 1986, vol. 27, p. 73.
10. V. Randle: Acta Mater., 1999, vol. 47, pp. 4187–96.10.1016/S1359-6454(99)00277-3 ↗
11. E. Farabi, V. Tari, P.D. Hodgson, G.S. Rohrer, and H. Beladi: J. Mater. Sci., 2020, vol. 55, pp. 15299–5321.10.1007/s10853-020-05075-7 ↗
12. H. Beladi, G.S. Rohrer, A.D. Rollett, V. Tari, and P.D. Hodgson: Acta Mater., 2014, vol. 63, pp. 86–98.10.1016/j.actamat.2013.10.010 ↗
13. H. Beladi and G.S. Rohrer: Metall. and Mater. Trans. A, 2017, vol. 48, pp. 2781–90.10.1007/s11661-016-3630-4 ↗
14. V. Govindaraj, E. Farabi, S. Kada, P.D. Hodgson, R. Singh, G.S. Rohrer, and H. Beladi: J. Alloys Compd., 2021, vol. 886, p. 161333.10.1016/j.jallcom.2021.161333 ↗
15. A. Mirzaei, R. Ghaderi, P.D. Hodgson, X. Ma, G.S. Rohrer, and H. Beladi: J. Mater. Sci., 2022, vol. 57, pp. 8904–23.10.1007/s10853-022-07204-w ↗
16. A. Mirzaei, P.D. Hodgson, X. Ma, V. Peterson, E. Farabi, G.S. Rohrer, and H. Beladi: Mater. Sci. and Eng. A, 2024, vol. 889, p. 145793.10.1016/j.msea.2023.145793 ↗
17. H. Beladi, E. Farabi, P.D. Hodgson, M.R. Barnett, G.S. Rohrer, and D. Fabijanic: Phil. Mag., 2022, vol. 102, pp. 618–33.10.1080/14786435.2021.2011980 ↗
18. D.A. West and B.L. Adams: Metall. Mater. Trans. A, 1997, vol. 28, pp. 229–36.10.1007/s11661-997-0100-z ↗
19. R.E. Garcia and M.D. Vaudin: Acta Mater., 2007, vol. 55, pp. 5728–35.10.1016/j.actamat.2007.06.033 ↗
20. H. Beladi, V. Tari, A.D. Rollett, and G.S. Rohrer: Scripta Mater., 2023, vol. 222, p. 115042.10.1016/j.scriptamat.2022.115042 ↗
21. H. Beladi, Q. Chao, V. Tari, A.D. Rollett, and G.S. Rohrer: Mater. Charac., 2023, vol. 197, p. 112708.10.1016/j.matchar.2023.112708 ↗
22. Y. Wu and R. Zhu: J. Mater. Eng. and Perfor., 2019, vol. 28, pp. 6182–91.10.1007/s11665-019-04363-x ↗
23. B. Beausir and J.-J. Fundenberger: Analysis tools for electron and X-ray diffraction, ATEX—software, Université de Lorraine-Metz, 2017. www.atex-software.eu
24. H. Beladi, A. Ghaderi, and G.S. Rohrer: Phil. Mag., 2020, vol. 100, pp. 456–66.10.1080/14786435.2019.1692154 ↗
25. K. Glowinski and A. Morawiec: A toolbox for geometric grain boundary characterization, in Proceedings of the 1st International Conference on 3D Material Sciences. Springer, Cham, 2012, pp. 119–24.10.1007/978-3-319-48762-5_18 ↗
26. N. Haghdadi, P. Cizek, P.D. Hodgson, V. Tari, G.S. Rohrer, and H. Beladi: Acta Mater., 2018, vol. 145, pp. 196–209.10.1016/j.actamat.2017.11.057 ↗
27. T. Liu, S. Xia, H. Li, B. Zhou, Q. Bai, C. Su, and Z. Cai: J. Mater. Res., 2013, vol. 28, pp. 1165–76.10.1557/jmr.2013.37 ↗
28. G. Gottstein and T. Al-Samman: Mater. Sci. Forum, 2005, vol. 495–497, pp. 623–32.10.4028/www.scientific.net/MSF.495-497.623 ↗
29. T.H. Rriyanto, A. Insani, R. Muslih, and Bharoto: IOP Conf. Series: J. Phys., 2020, vol. 1436, p. 012061.10.1088/1742-6596/1641/1/012061 ↗
30. Y.N. Wang and J.C. Huang: Mater. Chem. and Phys., 2003, vol. 81, pp. 11–26.10.1016/S0254-0584(03)00168-8 ↗
31. N. Bozzolo, F. Gerspach, G. Sawina, F. Wagner, Accuracy of orientation function determination based on EBSD data—a case study of a recrystallized low alloyed Zr sheet, J. of Microscopy, 227 (2207), pp. 275-83.10.1111/j.1365-2818.2007.01811.x ↗
32. N. Bozzolo, N. Dewobroto, T. Grosdidier, and F. Wagner: Mater. Sci. and Eng. A, 2005, vol. 397, pp. 346–55.10.1016/j.msea.2005.02.049 ↗
33. D.M. Saylor, B. Dasher, Y. Pang, H.M. Miller, P. Wynblatt, A.D. Rollett, and G.S. Rohrer: J. Am. Ceram. Soc., 2004, vol. 87, pp. 724–26.10.1111/j.1551-2916.2004.00724.x ↗
34. H. Beladi and G.S. Rohrer: Metall. Mater. Trans. A, 2013, vol. 44, pp. 115–24.10.1007/s11661-012-1393-0 ↗
35. J. Gruber, D.C. George, A.P. Kuprat, G.S. Rohrer, and A.D. Rollett: Scripta Mater., 2005, vol. 53, pp. 351–55.10.1016/j.scriptamat.2005.04.004 ↗
36. G.S. Rohrer, J. Gruber, and A.D. Rollett: A model for the origin of anisotropic grain boundary character distributions in polycrystalline materials, in Applications of Texture Analysis, in Ceramic Transactions of Applications of Texture Analysis, vol. 201, A.D. Rollett, ed., John Wiley, Hoboken, 2009, pp. 343–54.
37. J. Gruber, G.S. Rohrer, and A.D. Rollett: Acta Mater., 2010, vol. 58, pp. 14–19.10.1016/j.actamat.2009.08.032 ↗
38. J.D. Nino and O.K. Johnson: Comp. Mater. Sci., 2023, vol. 217, p. 111879.10.1016/j.commatsci.2022.111879 ↗
39. S.J. Dillon and G.S. Rohrer: J. Am. Ceram. Soc., 2009, vol. 92, pp. 1580–85.10.1111/j.1551-2916.2009.03064.x ↗
40. J. Li, S.J. Dillon, and G.S. Rohrer: Acta Mater., 2009, vol. 57, pp. 4304–11.10.1016/j.actamat.2009.06.004 ↗
41. D. Wolf: J. Mater. Research, 1990, vol. 5, pp. 1708–30.10.1557/JMR.1990.1708 ↗
42. C.S. Kim and G.S. Rohrer: Interface Sci., 2004, vol. 12, pp. 19–27.10.1023/B:INTS.0000012291.81411.dc ↗
43. Q. Fan: J. Applied Crystall., 2012, vol. 45, pp. 1303–08.10.1107/S0021889812037764 ↗
44. F. Heidelbach, H.R. Wenk, S.R. Chen, J. Pospiech, and S.I. Wright: Mater. Sci. Eng. A, 1996, vol. 215, pp. 39–49.10.1016/0921-5093(96)10264-1 ↗
45. M.N. Kelly, K. Glowinski, N.T. Nuhfer, and G.S. Rohrer: Acta Mater., 2016, vol. 111, pp. 22–30.10.1016/j.actamat.2016.03.029 ↗
46. K. Pettersen and N. Ryum: Metall. Mater. Trans. A, 1989, vol. 20, pp. 847–52.10.1007/BF02651651 ↗