journal article·2025-05Open access

Effect of Environment on the Fatigue Crack Growth Behavior of Nitrogen-Alloyed Stainless Steel

M. Nani Babu, R. Duraipandi, A. Moitra, M. Vasudevan, K Sadananda, A. K. Vasudevan

Abstract

Abstract The effect of the environment on the fatigue crack growth (FCG) behavior of SS316L(N) steel, under Constant R and Constant K max test conditions, has been analyzed using the two-parametric approach that considers amplitude ΔK and the maximum stress intensity factor, K max, are the governing load parameters controlling crack growth. The data for any selected crack growth rates plotted in terms of ΔK vs K max fall into L-shaped curves defining the limiting values for ΔK * and $$K\max *$$ for each crack growth rate, starting from the threshold growth rate. The plot of these limiting values provides the material crack growth trajectory, showing the relative contributions of each on the crack growth rate in different environments. The results indicate that the K max contribution is dominant during crack growth in this alloy, particularly in corrosive environments. The time-dependent contributions during cyclic loads occur via the K max variable. In the present case, it can be predominately due to environmental effects. The fractographic evaluation provides further confirmation.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. R. Baldev, U. KamachiMudali, M. Vijayalakshmi, M.D. Mathew, A.K. Bhaduri, P. Chellapandi, S. Venugopal, C.S. Sundar, B.P. Rao, and B. Venkatraman: Adv. Mater. Res., 2013, vol. 794, pp. 3–25. https://doi.org/10.4028/www.scientific.net/AMR.794.3.10.4028/www.scientific.net/AMR.794.3 ↗
2. P. Puthiyavinayagam, P. Selvaraj, V. Balasubramaniyan, S. Raghupathy, K. Velusamy, K. Devan, B.K. Nashine, G.P. Kumar, S. Varatharajan, P. Mohanakrishnan, and G. Srinivasan: Prog. Nuc. Energy., 2017, vol. 101, pp. 19–42. https://doi.org/10.1016/j.pnucene.2017.03.015.10.1016/j.pnucene.2017.03.015 ↗
3. R.P. Wei: Eng. Fract. Mech., 1970, vol. 1(4), pp. 633–51. https://doi.org/10.1016/0013-7944(70)90004-4.10.1016/0013-7944(70)90004-4 ↗
4. K. Sadananda and A.K. Vasudevan: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 279–95. https://doi.org/10.1007/s11661-010-0472-3.10.1007/s11661-010-0472-3 ↗
5. A.J. McEvily and R.P. Wei: Fracture Mechanics and Corrosion Fatigue, University of Connecticut, Storrs, 1972, p. 0057.
6. L. Weng, J. Zhang, S. Kalnaus, M. Feng, and Y. Jiang: Int. J. Fatigue, 2013, vol. 48, pp. 156–64. https://doi.org/10.1016/j.ijfatigue.2012.10.015.10.1016/j.ijfatigue.2012.10.015 ↗
7. W.W. Gerberich and Y.T. Chen: Metall. Mater. Trans. A, 1975, vol. 6A, pp. 271–78. https://doi.org/10.1007/BF02667281.10.1007/BF02667281 ↗
8. P.E. Irving and A. Kurzfeld: Metal. Sci., 1978, vol. 12(11), pp. 495–502. https://doi.org/10.1179/msc.1978.12.11.495.10.1179/msc.1978.12.11.495 ↗
9. S. Kawai: Eng. Fract. Mech., 1982, vol. 16(6), pp. 857–70. https://doi.org/10.1016/0013-7944(82)90010-8.10.1016/0013-7944(82)90010-8 ↗
10. D.B. Dawson and R.M. Pelloux: Metall. Mater. Trans. B, 1974, vol. 5B, pp. 723–31. https://doi.org/10.1007/BF02644669.10.1007/BF02644669 ↗
11. M.O. Speidel: Metall. Mater. Trans. A, 1981, vol. 12A, pp. 779–89. https://doi.org/10.1007/BF02648342.10.1007/BF02648342 ↗
12. K. Sadananda, A.K. Vasudevan, and R.L. Holtz: Int. J. Fatigue, 2001, vol. 23, pp. 277–86. https://doi.org/10.1016/S0142-1123(01)00137-2.10.1016/S0142-1123(01)00137-2 ↗
13. K. Sadananda, A.K. Vasudevan, and I.W. Kang: Acta Mater., 2003, vol. 51(12), pp. 3399–3414. https://doi.org/10.1016/S1359-6454(03)00159-9.10.1016/S1359-6454(03)00159-9 ↗
14. K. Sadananda, A.K. Vasudevan, and N. Iyyer: Int. J. Fatigue, 2016, vol. 82, pp. 120–33. https://doi.org/10.1016/j.ijfatigue.2015.08.026.10.1016/j.ijfatigue.2015.08.026 ↗
15. E.U. Lee, A.K. Vasudevan, and K. Sadananda: Int. J. Fatigue, 2005, vol. 27(10–12), pp. 1597–1607. https://doi.org/10.1016/j.ijfatigue.2005.07.013.10.1016/j.ijfatigue.2005.07.013 ↗
16. A.K. Vasudevan and K. Sadananda: Int. J. Mater. Prod. Technol., 2007, vol. 30(1–3), pp. 3–16. https://doi.org/10.1504/IJMPT.2007.013105.10.1504/IJMPT.2007.013105 ↗
17. K. Sadananda and A.K. Vasudevan: Int. J. Fatigue, 2003, vol. 25(9–11), pp. 899–914. https://doi.org/10.1016/S0142-1123(03)00128-2.10.1016/S0142-1123(03)00128-2 ↗
18. K. Sadananda and A.K. Vasudevan: Fatigue Fract. Eng. Mater. Strut., 2003, vol. 26(9), pp. 835–45. https://doi.org/10.1046/j.1460-2695.2003.00684.x.10.1046/j.1460-2695.2003.00684.x ↗
19. McEvily AJ. and Wei RP, Corrosion Fatigue, Chemistry, Mechanism and Microstructure, . F. Devereux, AJ McEvily and RW Staehle, NACE, Houston,1972 pp. 381–95.
20. A.K. Vasudevan, K. Sadananda, and N. Louat: Mater. Sci. Eng. A, 1994, vol. 188(1–2), pp. 1–22. https://doi.org/10.1016/0921-5093(94)90351-4.10.1016/0921-5093(94)90351-4 ↗
21. W. Elber: The significance of fatigue crack closure. In Damage tolerance in aircraft structures 1971. ASTM International. https://doi.org/10.1520/STP26680S.10.1520/STP26680S ↗
22. S. Suresh and R.O. Ritchie: Metal. Sci., 1982, vol. 16(11), pp. 529–38. https://doi.org/10.1179/msc.1982.16.11.529.10.1179/msc.1982.16.11.529 ↗
23. J. Goodman: Mechanics Applied to Engineering, Green & co., Longmans, 1919.
24. N. Louat, K. Sadananda, M. Duesbery, and A.K. Vasudevan: Metall. Trans. A, 1993, vol. 24A, pp. 2225–32. https://doi.org/10.1007/BF02648597.10.1007/BF02648597 ↗
25. K. Sadananda and D.N. Ramaswamy: Philos. Magn. A, 2001, vol. 81(5), pp. 1283–1303. https://doi.org/10.1080/01418610108214441.10.1080/01418610108214441 ↗
26. K. Sadananda, N. Iyyer, A.K. Vasudevan, M. NaniBabu, and N. Phan: Metall. Mater. Trans. A, 2022, vol. 53A(12), pp. 4315–33. https://doi.org/10.1007/s11661-022-06826-8.10.1007/s11661-022-06826-8 ↗
27. B. Budiansky and J.W. Hutchinson: ASME J. Appl. Mech., 1978, vol. 45, pp. 267–76.10.1115/1.3424286 ↗
28. J.C. Newman. A finite element analysis of fatigue crack closure. InNatl. Symp. on Fracture Mech., 1974, (No. L-9715).
29. M. Gao and R.P. Wei: Scr. Metall. Mater., 1992, vol. 26(8), pp. 1175–80. https://doi.org/10.1016/0956-716X(92)90559-W.10.1016/0956-716X(92)90559-W ↗
30. M. Jakubowski: Fatigue Fract. Eng. Mater. Struct., 1998, vol. 21(8), pp. 937–46. https://doi.org/10.1046/j.1460-2695.1998.00060.x.10.1046/j.1460-2695.1998.00060.x ↗
31. R.A. Oriani and P.H. Josephic: Acta Metall., 1974, vol. 22(9), pp. 1065–74.10.1016/0001-6160(74)90061-3 ↗
32. D.P. Abraham and C.J. Altstetter: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2859–71. https://doi.org/10.1007/BF02669644.10.1007/BF02669644 ↗
33. A. Szummer and A. Janko: Corrosion, 1979, vol. 35(10), pp. 461–64. https://doi.org/10.5006/0010-9312-35.10.461.10.5006/0010-9312-35.10.461 ↗
34. D.A. Jones: Metall. Trans. A, 1985, vol. 16A, pp. 1133–41. https://doi.org/10.1007/BF02811682.10.1007/BF02811682 ↗
35. P.R. Rhodes: Corrosion, 1969, vol. 25(11), pp. 462–72. https://doi.org/10.5006/0010-9312-25.11.462.10.5006/0010-9312-25.11.462 ↗
36. G. Han, J. He, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46(13), pp. 4559–70. https://doi.org/10.1016/S1359-6454(98)00136-0.10.1016/S1359-6454(98)00136-0 ↗
37. Y.G. Zhao, Y.H. Lu, X.F. Zhang, Z.H. Li, T.G. Liu, and T. Shoji: Corr. Sci., 2024, vol. 232, p. 112041. https://doi.org/10.1016/j.corsci.2024.112041.10.1016/j.corsci.2024.112041 ↗
38. O.M. Alyousif and R. Nishimura: Corr. Sci., 2007, vol. 49, pp. 3040–51. https://doi.org/10.1016/j.corsci.2006.12.023.10.1016/j.corsci.2006.12.023 ↗
39. A.K. Vasudevan, R.E. Ricker, A.C. Miller, and D. Kujawski: Mater. Sci. Eng. A, 2022, vol. 861, p. 144383. https://doi.org/10.1016/j.msea.2022.144383.10.1016/j.msea.2022.144383 ↗
40. K. Sadananda and G. Glinka: Philos. Magn., 2005, vol. 85(2–3), pp. 189–203. https://doi.org/10.1080/14786430412331315653.10.1080/14786430412331315653 ↗