journal article·2025-05Open access

Near-Equilibrium Transformation Sequence of NiCrBSi Self-Fluxing Nickel Alloy

Anthony Ty, Yannick Balcaen, Morgane Mokhtari, Andrew Fitch, Olivier Dalverny, Joël Alexis

Abstract

Abstract NiCrBSi alloys are widely used as wear-resistant deposits. However, despite several studies, there are still some remaining questions concerning their microstructure and the transformation sequence during solidification. This study investigates a gas-atomized powder's non-equilibrium microstructure and a cast sample's near-equilibrium microstructure by synchrotron XRD coupled with SEM observations. NiCrBSi alloys consist of a nickel-rich matrix with CrB, Cr7C3, Ni3B, Ni31Si12 crystals and γ′ Ni3Si β1 precipitates. The transformation sequence is studied by in situ XRD analyses using a synchrotron source. Melting and solidification of Ni31Si12 and Ni3B and solid-state transformations of Ni31Si12 and Ni3Si β1 are depicted. Finally, the nickel-rich γ (Ni) matrix, CrB and Cr7C3, are likely to remain solid at high temperatures up to 1200 °C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. X. Tong, F. Li, M. Liu, M. Dai, and H. Zhou: Opt. Laser Technol., 2010, vol. 42, pp. 1154–61. https://doi.org/10.1016/j.optlastec.2010.03.001.10.1016/j.optlastec.2010.03.001 ↗
2. E. Feldshtein, M. Kardapolava, and O. Dyachenko: Surf. Coat. Technol., 2016, vol. 307, pp. 254–61. https://doi.org/10.1016/j.surfcoat.2016.08.068.10.1016/j.surfcoat.2016.08.068 ↗
3. K. Simunovic, T. Saric, and G. Simunovic: Tribol. Trans., 2014, vol. 57, pp. 955–79. https://doi.org/10.1080/10402004.2014.927547.10.1080/10402004.2014.927547 ↗
4. D. Wang, E. Liang, M. Chao, and B. Yuan: Surf. Coat. Technol., 2008, vol. 202, pp. 1371–78. https://doi.org/10.1016/j.surfcoat.2007.06.036.10.1016/j.surfcoat.2007.06.036 ↗
5. T.S. Sidhu, S. Prakash, and R.D. Agrawal: Acta Mater., 2006, vol. 54, pp. 773–84. https://doi.org/10.1016/j.actamat.2005.10.009.10.1016/j.actamat.2005.10.009 ↗
6. H. Chen, C. Xu, J. Qu, I.M. Hutchings, P.H. Shipway, and J. Liu: Wear, 2005, vol. 259, pp. 801–06. https://doi.org/10.1016/j.wear.2005.02.066.10.1016/j.wear.2005.02.066 ↗
7. S. Havrlisan, K. Simunovic, and D. Vukelic: The. Vjesn-Tech. Gaz., 2016, vol. 23, pp. 1687–93.
8. S. Lebaili, M. Durand-Charre, and S. Hamar-Thibault: J. Mater. Sci., 1988, vol. 23, pp. 3603–11. https://doi.org/10.1007/BF00540502.10.1007/BF00540502 ↗
9. F. Bourahima, Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLS017. Accessed September 6, 2021.
10. T. Liyanage, G. Fisher, and A.P. Gerlich: Surf. Coat. Technol., 2010, vol. 205, pp. 759–65. https://doi.org/10.1016/j.surfcoat.2010.07.095.10.1016/j.surfcoat.2010.07.095 ↗
11. C. Sudha, P. Shankar, R.V.S. Rao, R. Thirumurugesan, M. Vijayalakshmi, and B. Raj: Surf. Coat. Technol., 2008, vol. 202, pp. 2103–12. https://doi.org/10.1016/j.surfcoat.2007.08.063.10.1016/j.surfcoat.2007.08.063 ↗
12. O.G. Devojno, E. Feldshtein, M.A. Kardapolava, and N.I. Lutsko: Opt. Lasers Eng., 2018, vol. 106, pp. 32–38. https://doi.org/10.1016/j.optlaseng.2018.02.004.10.1016/j.optlaseng.2018.02.004 ↗
13. J.F. Flores, A. Neville, N. Kapur, and A. Gnanavelu: Wear, 2009, vol. 267, pp. 213–22. https://doi.org/10.1016/j.wear.2008.11.015.10.1016/j.wear.2008.11.015 ↗
14. A. Conde, F. Zubiri, and Y.J. de Damborenea: Mater. Sci. Eng. A, 2002, vol. 334, pp. 233–38. https://doi.org/10.1016/S0921-5093(01)01808-1.10.1016/S0921-5093(01)01808-1 ↗
15. C. Guo, J. Zhou, J. Chen, J. Zhao, Y. Yu, and H. Zhou: Wear, 2011, vol. 270, pp. 492–98. https://doi.org/10.1016/j.wear.2011.01.003.10.1016/j.wear.2011.01.003 ↗
16. C.R. Das, S.K. Albert, A.K. Bhaduri, C. Sudha, and A.L.E. Terrance: Surf. Eng., 2005, vol. 21, pp. 290–96. https://doi.org/10.1179/174329405X40867.10.1179/174329405X40867 ↗
17. T.A. Zimoglyadova, H. Saage, V.A. Pasichnik, A.S. Egorova, and O. Matts: Met. Sci. Heat Treat., 2019, vol. 60, pp. 633–40. https://doi.org/10.1007/s11041-019-00330-4.10.1007/s11041-019-00330-4 ↗
18. R. Rachidi, B. El Kihel, and F. Delaunois: Mater. Sci. Eng. B, 2019, vol. 241, pp. 13–21. https://doi.org/10.1016/j.mseb.2019.02.002.10.1016/j.mseb.2019.02.002 ↗
19. A.V. Makarov, N.N. Soboleva, IYu. Malygina, and A.L. Osintseva: Met. Sci. Heat Treat., 2015, vol. 57, pp. 161–68. https://doi.org/10.1007/s11041-015-9856-8.10.1007/s11041-015-9856-8 ↗
20. A.V. Makarov, N.N. Soboleva, IYu. Malygina, and E.V. Kharanzhevskiy: J. Cryst. Growth, 2019, vol. 525, p. 125200. https://doi.org/10.1016/j.jcrysgro.2019.125200.10.1016/j.jcrysgro.2019.125200 ↗
21. R. González, M.A. García, I. Peñuelas, M. Cadenas, M.R. del Fernández, A.H. Battez, and D. Felgueroso: Wear, 2007, vol. 263, pp. 619–24. https://doi.org/10.1016/j.wear.2007.01.094.10.1016/j.wear.2007.01.094 ↗
22. M. Yan and W.Z. Zhu: Surf. Coat. Technol., 1997, vol. 92, pp. 157–63. https://doi.org/10.1016/S0257-8972(97)00076-5.10.1016/S0257-8972(97)00076-5 ↗
23. I. Hemmati, J.C. Rao, V. Ocelík, and J.T.M. De Hosson: Microsc. Microanal. Off. J. Microsc. Soc. Am. Microbeam Anal. Soc. Microsc. Soc. Can., 2013, vol. 19, pp. 120–31. https://doi.org/10.1017/S1431927612013839.10.1017/S1431927612013839 ↗
24. I. Hemmati, R.M. Huizenga, V. Ocelík, and JTh.M. De Hosson: Acta Mater., 2013, vol. 61, pp. 6061–70. https://doi.org/10.1016/j.actamat.2013.06.048.10.1016/j.actamat.2013.06.048 ↗
25. I. Hemmati, V. Ocelik, K. Csach, and J.T.M. de Hosson: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 878–92. https://doi.org/10.1007/s11661-013-2004-4.10.1007/s11661-013-2004-4 ↗
26. L.-Y. Chen, T. Xu, H. Wang, P. Sang, S. Lu, Z.-X. Wang, S. Chen, and L.-C. Zhang: Surf. Coat. Technol., 2019, vol. 358, pp. 467–80. https://doi.org/10.1016/j.surfcoat.2018.11.019.10.1016/j.surfcoat.2018.11.019 ↗
27. Q. Li, D. Zhang, T. Lei, C. Chen, and W. Chen: Surf. Coat. Technol., 2001, vol. 137, pp. 122–35. https://doi.org/10.1016/S0257-8972(00)00732-5.10.1016/S0257-8972(00)00732-5 ↗
28. H.-J. Kim, S.-Y. Hwang, C.-H. Lee, and P. Juvanon: Surf. Coat. Technol., 2003, vol. 172, pp. 262–69. https://doi.org/10.1016/S0257-8972(03)00348-7.10.1016/S0257-8972(03)00348-7 ↗
29. T. Gómez-del Río, M.A. Garrido, J.E. Fernández, M. Cadenas, and J. Rodríguez: J. Mater. Process. Technol., 2008, vol. 204, pp. 304–12. https://doi.org/10.1016/j.jmatprotec.2007.11.042.10.1016/j.jmatprotec.2007.11.042 ↗
30. L.C. Lim, Q. Ming, and Z.D. Chen: Surf. Coat. Technol., 1998, vol. 106, pp. 183–92. https://doi.org/10.1016/S0257-8972(98)00525-8.10.1016/S0257-8972(98)00525-8 ↗
31. E. Fernández, M. Cadenas, R. González, C. Navas, R. Fernández, and J. de Damborenea: Wear, 2005, vol. 259, pp. 870–75. https://doi.org/10.1016/j.wear.2005.02.063.10.1016/j.wear.2005.02.063 ↗
32. D. Zhang, T.C. Lei, J. Zhang, and J. Ouyang: Surf. Coat. Technol., 1999, vol. 115, pp. 176–83. https://doi.org/10.1016/S0257-8972(99)00176-0.10.1016/S0257-8972(99)00176-0 ↗
33. M. Corchia, P. Delogu, F. Nenci, A. Belmondo, S. Corcoruto, and W. Stabielli: Wear, 1987, vol. 119, pp. 137–52. https://doi.org/10.1016/0043-1648(87)90105-0.10.1016/0043-1648(87)90105-0 ↗
34. L.L. Zhai, C.Y. Ban, and J.W. Zhang: Surf. Coat. Technol., 2019, vol. 358, pp. 531–38. https://doi.org/10.1016/j.surfcoat.2018.11.034.10.1016/j.surfcoat.2018.11.034 ↗
35. R. González, M. Cadenas, R. Fernández, J.L. Cortizo, and E. Rodríguez: Wear, 2007, vol. 262, pp. 301–07. https://doi.org/10.1016/j.wear.2006.05.009.10.1016/j.wear.2006.05.009 ↗
36. Z. Bergant, U. Trdan, and J. Grum: Corros. Sci., 2014, vol. 88, pp. 372–86. https://doi.org/10.1016/j.corsci.2014.07.057.10.1016/j.corsci.2014.07.057 ↗
37. Z. Bergant and J. Grum: J. Therm. Spray Technol., 2009, vol. 18, pp. 380–91.10.1007/s11666-009-9304-7 ↗
38. J. Flores, A. Neville, N. Kapur, and A. Gnanavelu: NACE International Corrosion Conference Series, 2008.
39. G. Chakraborty, S.K. Albert, and A.K. Bhaduri: Mater. Sci. Technol., 2012, vol. 28, pp. 454–59. https://doi.org/10.1179/1743284711Y.0000000082.10.1179/1743284711Y.0000000082 ↗
40. C. Navas, R. Vijande, J.M. Cuetos, M.R. Fernández, and J. de Damborenea: Surf. Coat. Technol., 2006, vol. 201, pp. 776–85. https://doi.org/10.1016/j.surfcoat.2005.12.032.10.1016/j.surfcoat.2005.12.032 ↗
41. L.-Y. Chen, T. Xu, S. Lu, Z.-X. Wang, S. Chen, and L.-C. Zhang: Surf. Coat. Technol., 2018, vol. 350, pp. 436–44. https://doi.org/10.1016/j.surfcoat.2018.07.037.10.1016/j.surfcoat.2018.07.037 ↗
42. L.-Y. Chen, H. Wang, C. Zhao, S. Lu, Z.-X. Wang, J. Sha, S. Chen, and L.-C. Zhang: Surf. Coat. Technol., 2019, vol. 369, pp. 31–43. https://doi.org/10.1016/j.surfcoat.2019.04.052.10.1016/j.surfcoat.2019.04.052 ↗
43. N. Serres, F. Hlawka, S. Costil, C. Langlade, and F. Machi: J. Therm. Spray Technol., 2011, vol. 20, pp. 336–43. https://doi.org/10.1007/s11666-010-9565-1.10.1007/s11666-010-9565-1 ↗
44. E.-J. Chun, M.-S. Kim, H. Nishikawa, C. Park, and J. Suh: Opt. Laser Technol., 2018, vol. 100, pp. 317–24. https://doi.org/10.1016/j.optlastec.2017.10.021.10.1016/j.optlastec.2017.10.021 ↗
45. J.C. Pereira, M.C. Taboada, A. Niklas, E. Rayón, and J. Rocchi: J. Manuf. Mater. Process., 2023, vol. 7, p. 110. https://doi.org/10.3390/jmmp7030110.10.3390/jmmp7030110 ↗
46. X. Li, K. Zweiacker, D. Grolimund, D. Ferreira Sanchez, A.B. Spierings, C. Leinenbach, and K. Wegener: Materials, 2020, vol. 13, p. 2192. https://doi.org/10.3390/ma13092192.10.3390/ma13092192 ↗
47. K. Simunovic, T. Saric, and G. Simunovic: Tribol. Trans., 2014, vol. 57, pp. 980–1000. https://doi.org/10.1080/10402004.2014.927548.10.1080/10402004.2014.927548 ↗
48. M. Jiang, X.P. Jiang, J.G. Huang, X.F. Sun, J.S. Zhang, Y.L. Ge, and Z.Q. Hu: Mater. Lett., 1989, vol. 7, pp. 453–55. https://doi.org/10.1016/0167-577X(89)90051-7.10.1016/0167-577X(89)90051-7 ↗
49. O. Adegoke, J. Andersson, H. Brodin, and R. Pederson: Metals, 2020, vol. 10, p. 996. https://doi.org/10.3390/met10080996.10.3390/met10080996 ↗
50. A. Ty, Y. Balcaen, M. Mokhtari, J. Rigaud, O. Dalverny, and J. Alexis: Metals, 2023, vol. 13, p. 1669. https://doi.org/10.3390/met13101669.10.3390/met13101669 ↗
51. W.J. Boettinger, U.R. Kattner, K.-W. Moon, and J.H. Perepezko: in Methods for Phase Diagram Determination. J.-C. Zhao, ed., Elsevier Science Ltd, Oxford, 2007, pp. 151–221. https://doi.org/10.1016/B978-008044629-5/50005-7.10.1016/B978-008044629-5/50005-7 ↗
52. J. Wright, G.B.M. Vaughan, and A. Fitch: Int. Union Crystallogr. Comm. Crystallogr. Comput. Newsl., 2003, vol. 1, pp. 92–6.
53. J.-L. Hodeau, P. Bordet, M. Anne, A. Prat, A.N. Fitch, E. Dooryhee, G. Vaughan, and A.K. Freund: Crystal and Multilayer Optics, SPIE, 1998, pp. 353–61. https://doi.org/10.1117/12.332525.10.1117/12.332525 ↗
54. A. Fitch, C. Dejoie, E. Covacci, G. Confalonieri, O. Grendal, L. Claustre, P. Guillou, J. Kieffer, W. de Nolf, S. Petitdemange, M. Ruat, and Y. Watier: J. Synchrotron Radiat., 2023, vol. 30, pp. 1003–12. https://doi.org/10.1107/S1600577523004915.10.1107/S1600577523004915 ↗
55. R. Jenkins, T.G. Fawcett, D.K. Smith, J.W. Visser, M.C. Morris, and L.K. Frevel: Powder Diffr., 1986, vol. 1, pp. 51–63. https://doi.org/10.1017/S0885715600011581.10.1017/S0885715600011581 ↗
56. A. Jain, S.P. Ong, G. Hautier, W. Chen, W.D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder, and K.A. Persson: APL Mater., 2013, vol. 1, p. 011002. https://doi.org/10.1063/1.4812323.10.1063/1.4812323 ↗
57. A. Vaitkus, A. Merkys, and S. Gražulis: J. Appl. Crystallogr., 2021, vol. 54, pp. 661–72. https://doi.org/10.1107/S1600576720016532.10.1107/S1600576720016532 ↗
58. L. Lutterotti: NATO Sci. Peace Secur. B, 2012. https://doi.org/10.1007/978-94-007-5580-2_21.10.1007/978-94-007-5580-2_21 ↗
59. T. Grosdidier, A. Hazotte, and A. Simon: Mater. Sci. Eng. A, 1998, vol. 256, pp. 183–96. https://doi.org/10.1016/S0921-5093(98)00795-3.10.1016/S0921-5093(98)00795-3 ↗
60. H. Huang, H. Zhang, B. Hu, H. Wang, and G. Liu: Intermetallics, 2020, vol. 116, p. 106659. https://doi.org/10.1016/j.intermet.2019.106659.10.1016/j.intermet.2019.106659 ↗
61. S. Xiang, S. Mao, H. Wei, Y. Liu, J. Zhang, Z. Shen, H. Long, H. Zhang, X. Wang, Z. Zhang, and X. Han: Acta Mater., 2016, vol. 116, pp. 343–53. https://doi.org/10.1016/j.actamat.2016.06.055.10.1016/j.actamat.2016.06.055 ↗
62. H. Yu, Z. Wang, B. Zhang, Y. Ning, and M.W. Fu: J. Alloys Compd., 2021, vol. 876, p. 160104. https://doi.org/10.1016/j.jallcom.2021.160104.10.1016/j.jallcom.2021.160104 ↗
63. L. Zhu, H. Pan, J. Cheng, L. Xiao, J. Guo, and H. Ji: J. Alloys Compd., 2022, vol. 918, p. 165677. https://doi.org/10.1016/j.jallcom.2022.165677.10.1016/j.jallcom.2022.165677 ↗
64. H. Yu, Z. Wang, B. Zhang, Y. Ning, and M.W. Fu: Mater. Lett., 2022, vol. 307, p. 131067. https://doi.org/10.1016/j.matlet.2021.131067.10.1016/j.matlet.2021.131067 ↗
65. C. Wu, C. Cui, W. Liu, K. Zhang, Z. Wang, Y. Zhao, and H. Su: Mater. Chem. Phys., 2023, vol. 317, p. 129063.10.1016/j.matchemphys.2024.129063 ↗
66. C. Cui, J. Zhang, K. Wu, Y. Ma, L. Liu, and H. Fu: Physica B, 2012, vol. 407, pp. 3566–69. https://doi.org/10.1016/j.physb.2012.05.026.10.1016/j.physb.2012.05.026 ↗
67. L. Tous, PhD Thesis, KU Leuven, 2014.
68. K. van Stiphout, PhD Thesis, KU Leuven, 2018. https://doi.org/10.13140/RG.2.2.25336.47367.10.13140/RG.2.2.25336.47367 ↗
69. G.-C. Ji, C.-J. Li, Y.-Y. Wang, and W.-Y. Li: Surf. Coat. Technol., 2006, vol. 200, pp. 6749–57. https://doi.org/10.1016/j.surfcoat.2005.10.005.10.1016/j.surfcoat.2005.10.005 ↗
70. B. Geddes, H. Leon, and X. Huang: Superalloys: Alloying and Performance, ASM International, Detroit, 2010.10.31399/asm.tb.sap.9781627083133 ↗
71. K. Hirota, K. Mitani, M. Yoshinaka, and O. Yamaguchi: Mater. Sci. Eng. A, 2005, vol. 399, pp. 154–60. https://doi.org/10.1016/j.msea.2005.02.062.10.1016/j.msea.2005.02.062 ↗
72. S. Matthews and L.-M. Berger: Int. J. Refract. Met. Hard Mater., 2016, vol. 59, pp. 1–18. https://doi.org/10.1016/j.ijrmhm.2016.05.010.10.1016/j.ijrmhm.2016.05.010 ↗
73. A. Sobolev and A. Mirzoev: J. Alloys Compd., 2019, vol. 804, pp. 566–72. https://doi.org/10.1016/j.jallcom.2019.06.282.10.1016/j.jallcom.2019.06.282 ↗
74. B. Wang, D.Y. Wang, Z. Cheng, X. Wang, and Y.X. Wang: ChemPhysChem, 2013, vol. 14, pp. 1245–55. https://doi.org/10.1002/cphc.201201009.10.1002/cphc.201201009 ↗
75. R. Gumeniuk, H. Borrmann, A. Leithe-Jasper, and Z. Kristallogr: N. Cryst. Struct., 2006. https://doi.org/10.1524/ncrs.2006.221.14.425.10.1524/ncrs.2006.221.14.425 ↗
76. D. Connétable and O. Thomas: J. Alloys Compd., 2011, vol. 509, pp. 2639–44. https://doi.org/10.1016/j.jallcom.2010.10.118.10.1016/j.jallcom.2010.10.118 ↗
77. Q.Y. Hou, Z.Y. Huang, N. Shi, and J. Gao: J. Mater. Process. Technol., 2009, vol. 209, pp. 2767–72. https://doi.org/10.1016/j.jmatprotec.2008.06.025.10.1016/j.jmatprotec.2008.06.025 ↗
78. C. Cui, C. Ren, L. Tian, P. Wang, S. Wang, and I.O.P. Conf: Ser. Mater. Sci. Eng., 2018, vol. 394, p. 022012. https://doi.org/10.1088/1757-899X/394/2/022012.10.1088/1757-899X/394/2/022012 ↗
79. L. Cao, PhD, University of Leeds, 2014. https://etheses.whiterose.ac.uk/7224/. Accessed November 13, 2023.
80. X. Li, B. Zhang, T. Wang, Z. Liu, and T. Yu: J. Alloys Compd., 2016, vol. 672, pp. 578–81. https://doi.org/10.1016/j.jallcom.2016.02.144.10.1016/j.jallcom.2016.02.144 ↗
81. Y. Himuro, Y. Tanaka, I. Ohnuma, R. Kainuma, and K. Ishida: Intermetallics, 2005, vol. 13, pp. 620–30. https://doi.org/10.1016/j.intermet.2004.10.009.10.1016/j.intermet.2004.10.009 ↗
82. M. Niu, Q. Bi, S. Zhu, J. Yang, and W. Liu: J. Alloys Compd., 2013, vol. 555, pp. 367–74. https://doi.org/10.1016/j.jallcom.2012.12.079.10.1016/j.jallcom.2012.12.079 ↗
83. S. Van Dyck, L. Delaey, L. Froyen, and L. Buekenhout: Mater. Charact., 1997, vol. 38, pp. 1–12. https://doi.org/10.1016/S1044-5803(96)00099-X.10.1016/S1044-5803(96)00099-X ↗