journal article·2025-04Open access

Effects of Cu Layer on the Deformation and Fracture Behavior of Martensitic Steel Layer in the Multilayered Sheet

Ryusei Kato, Norimitsu Koga, Chihiro Watanabe

Abstract

Abstract Martensitic (α′) steel/Cu multilayered sheets with a volume fraction of 80 pct α′ steel were tempered, and the deformation and fracture behavior of these sheets were systematically investigated. The microstructural features such as prior austenite grain and block sizes in the α′ layer of the multilayered sheet were identical to those in the single-layer sheets. The multilayered sheets exhibited larger fracture elongation with a characteristically large local strain than the α′ steel single-layer sheets. Inhomogeneous strain distributions developed in all the sheets during tensile deformation, but the strain distributions of multilayered sheets were more inhomogeneous than that of α′ steel single-layer sheets. Strain bands, in which high-strain regions were continuously aligned along approximately 45 deg in the tensile direction, developed in all the sheets during deformation. Microvoids often nucleated at the intersections of strain bands, and their number density in multilayered sheets was lower than that in α′ steel single-layer sheets, resulting in a lower number density of microvoids. Therefore, it can be concluded that laminating with Cu decreased the number density of strain bands and suppressed void nucleation in the α′ steel layers, hindering the fatal fracture of the α′ steel/Cu multilayered sheets.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. T. Koseki, J. Inoue, and S. Nambu: Mater. Trans., 2014, vol. 55, pp. 227–37. https://doi.org/10.2320/matertrans.M2013382.10.2320/matertrans.M2013382 ↗
2. M. Pozuelo, F. Carreño, and O.A. Ruano: Compos. Sci. Technol., 2006, vol. 66, pp. 2671–76. https://doi.org/10.1016/j.compscitech.2006.03.018.10.1016/j.compscitech.2006.03.018 ↗
3. J. Park, M.C. Jo, T. Song, H.S. Kim, S.S. Sohn, and S. Lee: Mater. Sci. Eng. A, 2019, vol. 759, pp. 320–28. https://doi.org/10.1016/j.msea.2019.05.046.10.1016/j.msea.2019.05.046 ↗
4. T. Mo, S. Liu, R. Yang, H. Xiao, W. Li, and K. Ma: Mater. Charact., 2023, vol. 202, p. 113003. https://doi.org/10.1016/j.matchar.2023.113003.10.1016/j.matchar.2023.113003 ↗
5. Y. Du, G. Fan, T. Yu, N. Hansen, L. Geng, and X. Huang: Mater. Sci. Eng. A, 2016, vol. 673, pp. 572–80. https://doi.org/10.1016/j.msea.2016.07.108.10.1016/j.msea.2016.07.108 ↗
6. M. Huang, C. Xu, G. Fan, E. Maawad, W. Gan, L. Geng, F. Lin, G. Tang, H. Wu, Y. Du, D. Li, K. Miao, T. Zhang, X. Yang, Y. Xia, G. Cao, H. Kang, T. Wang, T. Xiao, and H. Xie: Acta Mater., 2018, vol. 153, pp. 235–49. https://doi.org/10.1016/j.actamat.2018.05.005.10.1016/j.actamat.2018.05.005 ↗
7. D.G. Kim, Y.H. Jo, T. Song, H.S. Kim, B.J. Lee, S.S. Sohn, and S. Lee: Mater. Sci. Eng. A, 2021, vol. 823, p. 141727. https://doi.org/10.1016/j.msea.2021.141727.10.1016/j.msea.2021.141727 ↗
8. S.G. Lee, Y.H. Jo, T. Song, H.S. Kim, B.J. Lee, S.S. Sohn, and S. Lee: Mater. Sci. Eng. A, 2021, vol. 822, p. 141670. https://doi.org/10.1016/j.msea.2021.141670.10.1016/j.msea.2021.141670 ↗
9. X. Ma, C. Huang, J. Moering, M. Ruppert, H.W. Höppel, M. Göken, J. Narayan, and Y. Zhu: Acta Mater., 2016, vol. 116, pp. 43–52. https://doi.org/10.1016/j.actamat.2016.06.023.10.1016/j.actamat.2016.06.023 ↗
10. J. Tang, L. Chen, Y. Chen, L. Qian, and B. Que: Mater. Charct., 2024, vol. 207, p. 113535. https://doi.org/10.1016/j.matchar.2023.113535.10.1016/j.matchar.2023.113535 ↗
11. S.L. Semiatin and H.R. Piehler: Metall. Mater. Trans., 1979, vol. 10, pp. 85–96. https://doi.org/10.1007/BF02686411.10.1007/BF02686411 ↗
12. S. Ho and Z. Suo: J. Appl. Mech., 1993, vol. 60, pp. 890–94. https://doi.org/10.1115/1.2900998.10.1115/1.2900998 ↗
13. A.S.J. Suiker and N.A. Fleck: Int. J. Fract., 2004, vol. 125, pp. 1–32. https://doi.org/10.1023/B:FRAC.0000021064.52949.e2.10.1023/B:FRAC.0000021064.52949.e2 ↗
14. S. Nambu, M. Michiuchi, J. Inoue, and T. Koseki: Compos. Sci. Technol., 2009, vol. 69, pp. 1936–41. https://doi.org/10.1016/j.compscitech.2009.04.013.10.1016/j.compscitech.2009.04.013 ↗
15. J. Inoue, S. Nambu, Y. Ishimoto, and T. Koseki: Scripta Mater., 2008, vol. 59, pp. 1055–058. https://doi.org/10.1016/j.scriptamat.2008.07.020.10.1016/j.scriptamat.2008.07.020 ↗
16. M.V.C. Alfaro, A.S. Suiker, R. de Borst, and J.J. Remmers: Eng. Fract. Mech., 2009, vol. 76, pp. 761–80. https://doi.org/10.1016/j.engfracmech.2008.09.002.10.1016/j.engfracmech.2008.09.002 ↗
17. L. Qin, J. Wang, Q. Wu, X. Guo, and J. Tao: J. Alloys Compd., 2017, vol. 712, pp. 69–75. https://doi.org/10.1016/j.jallcom.2017.04.063.10.1016/j.jallcom.2017.04.063 ↗
18. H. Zhu, W. Sun, F. Kong, X. Wang, Z. Song, and Y. Chen: Mater. Sci. Eng. A, 2019, vol. 742, pp. 704–11. https://doi.org/10.1016/j.msea.2018.07.086.10.1016/j.msea.2018.07.086 ↗
19. W.X. Yu, B.X. Liu, J.F. Zhao, Z.M. Lin, S.J. Zheng, F.X. Yin, and N. Hu: Scripta Mater., 2024, vol. 241, p. 115865. https://doi.org/10.1016/j.scriptamat.2023.115865.10.1016/j.scriptamat.2023.115865 ↗
20. Z.H. He, M.A. Sutton, W.F. Ranson, and W.H. Peters: Exp. Mech., 1984, vol. 24, pp. 117–21. https://doi.org/10.1007/BF02324993.10.1007/BF02324993 ↗
21. T.C. Chu, W.F. Ranson, M.A. Sutton, and W.H. Peters: Exp. Mech., 1985, vol. 25, pp. 232–44. https://doi.org/10.1007/BF02325092.10.1007/BF02325092 ↗
22. J.D. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu: Int. J. Fract., 2013, vol. 57, pp. 140–50. https://doi.org/10.1016/j.ijfatigue.2012.06.010.10.1016/j.ijfatigue.2012.06.010 ↗
23. S. Hamada, T. Fujisawa, M. Koyama, N. Koga, N. Nakada, T. Tsuchiyama, M. Ueda, and H. Noguchi: Mater. Charact., 2014, vol. 98, pp. 140–46. https://doi.org/10.1016/j.matchar.2014.10.010.10.1016/j.matchar.2014.10.010 ↗
24. N. Koga, T. Nameki, O. Umezawa, V. Tschan, and K.P. Weiss: Mater. Sci. Eng. A, 2021, vol. 801, p. 140442. https://doi.org/10.1016/j.msea.2020.140442.10.1016/j.msea.2020.140442 ↗
25. T. Teshima, M. Kosaka, K. Ushioda, N. Koga, and N. Nakada: Mater. Sci. Eng. A, 2017, vol. 679, pp. 223–29. https://doi.org/10.1016/j.msea.2016.10.018.10.1016/j.msea.2016.10.018 ↗
26. Y. Yajima, N. Koga, and C. Watanabe: Mater. Charct., 2021, vol. 177, p. 111197. https://doi.org/10.1016/j.matchar.2021.111197.10.1016/j.matchar.2021.111197 ↗
27. N. Koga, A. Kaseya, O. Umezawa, H. Nakata, and S. Toyoda: ISIJ Int., 2022, vol. 62, pp. 2132–34. https://doi.org/10.2355/isijinternational.ISIJINT-2022-173.10.2355/isijinternational.ISIJINT-2022-173 ↗
28. N. Koga, Y. Kanehira, P.T.T. Huyen, K. Hori, and O. Umezawa: ISIJ Int., 2021, vol. 61, pp. 2308–316. https://doi.org/10.2355/isijinternational.ISIJINT-2021-143.10.2355/isijinternational.ISIJINT-2021-143 ↗
29. N. Koga, M. Fujita, and C. Watanabe: Mater. Trans., 2021, vol. 62, pp. 1424–27. https://doi.org/10.2320/matertrans.MT-M2021118.10.2320/matertrans.MT-M2021118 ↗
30. N. Koga, M. Fujita, K. Shibata, and S. Nanba: ISIJ Int., 2024, vol. 64, pp. 491–96. https://doi.org/10.2355/isijinternational.ISIJINT-2023-121.10.2355/isijinternational.ISIJINT-2023-121 ↗
31. X. Yang, K. Guo, Y. Gao, B. Wu, J. Li, Y. Gao, Q. Wang, and F. Zhang: Mater. Sci. Eng. A, 2021, vol. 824, p. 141802. https://doi.org/10.1016/j.msea.2021.141802.10.1016/j.msea.2021.141802 ↗
32. M. Talebian and M. Alizadeh: Mater. Sci. Eng. A, 2014, vol. 590, pp. 186–93. https://doi.org/10.1016/j.msea.2013.10.026.10.1016/j.msea.2013.10.026 ↗
33. F. Yao, G. You, S. Zeng, K. Zhou, L. Peng, and Y. Ming: J. Mater. Res. Technol., 2021, vol. 14, pp. 1539–50. https://doi.org/10.1016/j.jmrt.2021.07.042.10.1016/j.jmrt.2021.07.042 ↗
34. M. Ebrahimi, G. Liu, Q. Wang, H. Jiang, W. Ding, Z. Shang, and L. Luo: Mater. Sci. Eng. A, 2020, vol. 798, p. 140129. https://doi.org/10.1016/j.msea.2020.140129.10.1016/j.msea.2020.140129 ↗
35. N. Koga, S. Tomono, and O. Umezawa: Mater. Sci. Eng. A, 2021, vol. 811, p. 141066. https://doi.org/10.1016/j.msea.2021.141066.10.1016/j.msea.2021.141066 ↗
36. R. Kato, N. Koga, and C. Watanabe: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 4203–207. https://doi.org/10.1007/s11661-023-07168-9.10.1007/s11661-023-07168-9 ↗
37. R. Kato, N. Koga, and C. Watanabe: Mater. Trans., 2024, vol. 65, pp. 205–11. https://doi.org/10.2320/matertrans.MT-M2023145.10.2320/matertrans.MT-M2023145 ↗
38. G. Krauss: ISIJ Int., 1995, vol. 35, pp. 349–59. https://doi.org/10.2355/isijinternational.35.349.10.2355/isijinternational.35.349 ↗
39. G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–054. https://doi.org/10.1007/BF02642436.10.1007/BF02642436 ↗
40. K.G. Chin, C.Y. Kang, J. Park, and S. Lee: Metal Mater. Int., 2018, vol. 24, pp. 489–95. https://doi.org/10.1007/s12540-018-0081-z.10.1007/s12540-018-0081-z ↗
41. D. Yan, C.C. Tasan, and D. Raabe: Acta Mater., 2015, vol. 96, pp. 399–409. https://doi.org/10.1016/j.actamat.2015.05.038.10.1016/j.actamat.2015.05.038 ↗
42. S. Morito, Y. Adachi, and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919–23. https://doi.org/10.2320/matertrans.MRA2008409.10.2320/matertrans.MRA2008409 ↗
43. Y. Kai, T. Ogawa, Z. Wang, and Y. Adachi: ISIJ Int., 2021, vol. 61, pp. 481–86. https://doi.org/10.2355/isijinternational.ISIJINT-2020-305.10.2355/isijinternational.ISIJINT-2020-305 ↗
44. M. Jafari, S. Ziaei-Rad, N. Saeidi, and M. Jamshidian: Mater. Sci. Eng. A, 2018, vol. 670, pp. 57–67. https://doi.org/10.1016/j.msea.2016.05.094.10.1016/j.msea.2016.05.094 ↗
45. H. Ghadbeigi, C. Pinna, S. Celotto, and J.R. Yates: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5026–032. https://doi.org/10.1016/j.msea.2010.04.052.10.1016/j.msea.2010.04.052 ↗
46. N. Koga, M. Suzuki, and O. Umezawa: Procedia Manuf., 2018, vol. 15, pp. 1656–62. https://doi.org/10.1016/j.promfg.2018.07.271.10.1016/j.promfg.2018.07.271 ↗
47. N. Koga, Y. Sakamaki, A. Kaseya, O. Umezawa, H. Nakata, and S. Toyoda: Mater. Charct., 2022, vol. 185, p. 111731. https://doi.org/10.1016/j.matchar.2022.111731.10.1016/j.matchar.2022.111731 ↗
48. N. Koga, T. Yamashita, and O. Umezawa: ISIJ Int., 2020, vol. 60, pp. 2083–089. https://doi.org/10.2355/isijinternational.ISIJINT-2019-497.10.2355/isijinternational.ISIJINT-2019-497 ↗
49. N. Koga, S. Kumon, and C. Watanabe: ISIJ Int., 2023. https://doi.org/10.2355/isijinternational.ISIJINT-2023-127.10.2355/isijinternational.ISIJINT-2023-127 ↗
50. Y. Ishimoto, M. Michiuchi, S. Nambu, K. Asakura, J. Inoue, and T. Koseki: J. Jpn. Inst. Met., 2009, vol. 73, pp. 720–27. https://doi.org/10.2320/jinstmet.73.720.10.2320/jinstmet.73.720 ↗
51. A. Ramazani, A. Schwedt, A. Aretz, U. Prahl, and W. Bleck: Comput. Mater. Sci., 2013, vol. 75, pp. 35–44. https://doi.org/10.1016/j.commatsci.2013.04.001.10.1016/j.commatsci.2013.04.001 ↗
52. H. Ghadbeigi, C. Pinna, and S. Celotto: Mater. Sci. Eng. A, 2013, vol. 588, pp. 420–31. https://doi.org/10.1016/j.msea.2013.09.048.10.1016/j.msea.2013.09.048 ↗
53. N. Nakada, M. Nishiyama, N. Koga, T. Tsuchiyama, and S. Takaki: Tetsu-to-Hagané, 2014, vol. 100, p. 10. https://doi.org/10.2355/tetsutohagane.100.1238.10.2355/tetsutohagane.100.1238 ↗
54. P.F. Thomason: Ductile Fracture of Metals, Pergamon Press, Oxford, 1990.
55. S. Jiang, R.L. Peng, Z. Hegedűs, T. Gnäupel-Herold, J.J. Moverare, U. Lienert, F. Fang, X. Zhao, L. Zuo, and N. Jia: Acta Mater., 2021, vol. 15, p. 116546. https://doi.org/10.1016/j.actamat.2020.116546.10.1016/j.actamat.2020.116546 ↗