journal article·2025-03Open access

On the Changes of Residual Stress States of S550MC + 100Cr6 Cladded Steel Upon Tensile Deformation

M. Krochmal, T. Wegener, J. Zeisberg, T. Niendorf

Abstract

Abstract The present study focuses on the evolution of residual stress (RS) and internal damage of a S550MC + 100Cr6 cladded steel after pre-deformation. Deformation-induced internal porosity was hardly found. RS depth profiles point at tensile RS in the 100Cr6 clad layer. These are most pronounced when minor pre-deformation levels are considered. A higher degree of deformation leads to reduced magnitudes of RS. This can be rationalized based on reduced differences in layer strength due to local strain hardening.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Towards a Climate-Neutral Germany: Three Steps for Achieving Climate Neutrality by 2050 and an Intermediate Target of -65 pct in 2030 as Part of the EU Green Deal, https://static.agora-energiewende.de/fileadmin/Projekte/2020/2020_10_KNDE/A-EW_193_KNDE_Executive-Summary_EN_WEB.pdf. Accessed 5 Dec 2023
2. Treibhausgasneutrales Deutschland: im Jahr 2050, https://www.umweltbundesamt.de/sites/default/files/medien/378/publikationen/07_2014_climate_change_dt.pdf. Accessed 5 Dec 2023
3. COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE EUROPEAN COUNCIL, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS: The European Green Deal, https://eur-lex.europa.eu/resource.html?uri=cellar:b828d165-1c22-11ea-8c1f-01aa75ed71a1.0002.02/DOC_1&format=PDF. Accessed 5 Dec 2023
4. S. Knirsch, M. Schöffmann, H. Fleischmann, A. Deimel, S. Schumm, W. Aldrian: Die neue S tronic-Getriebegeneration von AUDI, 35. Internationales Wiener Motorensymposium, 2014.
5. H. Lührs: Cladded Steel for Clutch Disc Carriers, Kassel University Press, Kassel, 2021. https://doi.org/10.17170/kobra-202104203719.10.17170/kobra-202104203719 ↗
6. J. Wadsworth and D.R. Lesuer: Mater Charact, 2000, vol. 45, pp. 289–313. https://doi.org/10.1016/S1044-5803(00)00077-2.10.1016/S1044-5803(00)00077-2 ↗
7. T. Koseki, J. Inoue, and S. Nambu: Mater. Trans., 2014, vol. 55, pp. 227–37. https://doi.org/10.2320/matertrans.M2013382.10.2320/matertrans.M2013382 ↗
8. M. Huang, G.H. Fan, L. Geng, G.J. Cao, Y. Du, H. Wu, T.T. Zhang, H.J. Kang, T.M. Wang, G.H. Du, and H.L. Xie: Sci. Rep., 2016, vol. 6, p. 38461. https://doi.org/10.1038/srep38461.10.1038/srep38461 ↗
9. D. Embury and O. Bouaziz: Annu. Rev. Mater. Res., 2010, vol. 40, pp. 213–41. https://doi.org/10.1146/annurev-matsci-070909-104438.10.1146/annurev-matsci-070909-104438 ↗
10. M. Krochmal, T. Wegener, and T. Niendorf: Fatigue Fract Eng Mat Struct, 2024, https://doi.org/10.1111/ffe.14383.10.1111/ffe.14383 ↗
11. T. Manns and B. Scholtes: MSF, 2011, vol. 681, pp. 417–19. https://doi.org/10.4028/www.scientific.net/MSF.681.417.10.4028/www.scientific.net/MSF.681.417 ↗
12. A. Wang, P.F. Thomson, and P.D. Hodgson: J. Mater. Process. Technol., 1996, vol. 60, pp. 95–102. https://doi.org/10.1016/0924-0136(96)02313-8.10.1016/0924-0136(96)02313-8 ↗
13. T. Ungár: Mater. Sci. Eng. A, 2001, vol. 309–310, pp. 14–22. https://doi.org/10.1016/S0921-5093(00)01685-3.10.1016/S0921-5093(00)01685-3 ↗
14. J.F. Hallai and S. Kyriakides: Int. J. Plast., 2013, vol. 47, pp. 1–12. https://doi.org/10.1016/j.ijplas.2012.12.002.10.1016/j.ijplas.2012.12.002 ↗
15. J.G. Kim, S.M. Baek, H.H. Lee, K.-G. Chin, S. Lee, and H.S. Kim: Acta Mater., 2018, vol. 147, pp. 304–12. https://doi.org/10.1016/j.actamat.2018.01.042.10.1016/j.actamat.2018.01.042 ↗
16. C.K. Syn, D.R. Lesuer, J. Wolfenstine, and O.D. Sherby: Metall. Trans. A, 1993, vol. 24A, pp. 1647–53. https://doi.org/10.1007/BF02646603.10.1007/BF02646603 ↗
17. W. Sun, F. You, F. Kong, X. Wang, and Y. Chen: Mater Charact, 2020, vol. 166, p. 110394. https://doi.org/10.1016/j.matchar.2020.110394.10.1016/j.matchar.2020.110394 ↗
18. X. Jiang, K. Miao, H. Wu, R. Li, Y. Xia, M. Chen, Y. Zhao, J. Jie, and G. Fan: Mater Charact, 2023, vol. 196, p. 112568. https://doi.org/10.1016/j.matchar.2022.112568.10.1016/j.matchar.2022.112568 ↗
19. R. Cleveland and A. Ghosh: Int. J. Plast., 2002, vol. 18, pp. 769–85. https://doi.org/10.1016/S0749-6419(01)00054-7.10.1016/S0749-6419(01)00054-7 ↗
20. F. Kümmel, A. Magnier, T. Wu, T. Niendorf, and H.W. Höppel: Adv. Eng. Mater., 2022, vol. 24, p. 2200274. https://doi.org/10.1002/adem.202200274.10.1002/adem.202200274 ↗