Microstructure and Selected Properties of Al2O3 Matrix Composites Fabricated by Pulse Plasma Sintering of Al2O3 and Pre-composite Powder (NiAl–Al2O3)
Source abstract
Abstract
Abstract Paper-related production of composite materials from Al2O3-pre-composite powder (NiAl–10 wt pct Al2O3). PPS allowed for forming ceramic–intermetallic composites. MA produced the pre-composite powder. Six series of composites were made, differing in temperature (1200 °C, 1300 °C, 1400 °C) and content of pre-composite powder (2.5 and 5 wt pct with respect to the amount of Al2O3). Highest hardness was obtained for composite series sintered at 1300 °C. Both series, with various pre-composite powder content, had a value of 20.8 to 20.9 GPa. Samples containing 2.5 wt pct pre-composite powder sintered at 1200 °C were highest KIC value of 4.72 ± 0.34 MPa·m0.5. Interestingly, the same value was obtained in composites containing 5 wt pct pre-composite powder sintered at 1300 °C. For both series with different pre-composite powder content, sintering at 1400 °C obtained the highest strength. For composites containing 2.5 wt pct pre-composite powder, splitting tensile strength value was 255.98 MPa, while for samples with 5 wt pct, pre-composite powder was 264.01 MPa Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. J.A. Yeomans: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 1543–50.10.1016/j.jeurceramsoc.2007.12.009 ↗
2. J.S. Moya, S. Lopez-Esteban, and C. Pecharromán: Prog. Mater. Sci., 2007, vol. 52, pp. 1017–90.10.1016/j.pmatsci.2006.09.003 ↗
3. X. Sun and J. Yeomans: J. Am. Ceram. Soc., 1996, vol. 79, pp. 2705–17.10.1111/j.1151-2916.1996.tb09036.x ↗
4. M.F. Ashby and Y.J.M. Bréchet: Acta Mater., 2003, vol. 51, pp. 5801–21.10.1016/S1359-6454(03)00441-5 ↗
5. T. Rodriguez-Suarez, J.F. Bartolomé, and J.S. Moya: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 3887–98.10.1016/j.jeurceramsoc.2012.06.026 ↗
6. W.-H. Tuan and Y.-P. Pai: J. Am. Ceram. Soc., 1999, vol. 82, pp. 1624–26.10.1111/j.1151-2916.1999.tb01974.x ↗
7. W.H. Tuan: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 895–99.10.1016/S0955-2219(99)00213-7 ↗
8. X. Lu, J. Li, X. Chen, C. Ran, Y. Wang, B. Liu, Y. Liu, M. Rashad, and F. Pan: Ceram. Int., 2019, vol. 45, pp. 12113–21.10.1016/j.ceramint.2019.03.111 ↗
9. T. Rodriguez-Suarez, J.F. Bartolomé, A. Smirnov, S. Lopez-Esteban, L.A. Díaz, R. Torrecillas, and J.S. Moya: Ceram. Int., 2011, vol. 37, pp. 1631–36.10.1016/j.ceramint.2011.01.033 ↗
10. B.A. Obadele, M.L. Lepule, A. Andrews, and P.A. Olubambi: Tribol. Int., 2014, vol. 78, pp. 160–67.10.1016/j.triboint.2014.05.011 ↗
11. M. Mori, Y. Hiei, H. Itoh, G.A. Tompsett, and N.M. Sammes: Solid State Ion., 2003, vol. 160, pp. 1–14.10.1016/S0167-2738(03)00144-9 ↗
12. D. Chakravarty and G. Sundararajan: J. Eur. Ceram. Soc., 2013, vol. 33, pp. 2597–2607.10.1016/j.jeurceramsoc.2013.04.021 ↗
13. C. Kunz, J.F. Bartolomé, E. Gnecco, F.A. Müller, and S. Gräf: Appl. Surf. Sci., 2018, vol. 434, pp. 582–87.10.1016/j.apsusc.2017.10.224 ↗
14. V. Verma and B.V. Manoj Kumar: Mater. Today Proc., 2017, vol. 4, pp. 3062–71.10.1016/j.matpr.2017.02.189 ↗
15. B. Zhang and F. Boey: Mater. Lett., 2000, vol. 43, pp. 197–202.10.1016/S0167-577X(99)00259-1 ↗
16. K. Konopka: J. Compos. Sci., 2022, vol. 6, p. 178.10.3390/jcs6060178 ↗
17. J. Zygmuntowicz, K. Konopka, M. Krasnowski, P. Piotrkiewicz, M. Wachowski, R. Żurowski, K. Cymerman, K. Kulikowski, and R. Sobiecki: Materials, 2023, vol. 16, p. 4136.10.3390/ma16114136 ↗
18. K. Konopka, J. Zygmuntowicz, M. Krasnowski, K. Cymerman, M. Wachowski, and P. Piotrkiewicz: Materials, 2022, vol. 15, p. 407.10.3390/ma15020407 ↗
19. D. Oleszak: J. Mater. Sci., 2004, vol. 39, pp. 5169–74.10.1023/B:JMSC.0000039204.08971.26 ↗
20. Y. Lu, M. Zhu, Q. Zhang, T. Hu, J. Wang, and K. Zheng: J. Eur. Ceram. Soc., 2020, vol. 40, pp. 1496–1504.10.1016/j.jeurceramsoc.2019.11.066 ↗
21. X. Zhang, G. Lu, M.J. Hoffmann, and R. Metselaar: J. Eur. Ceram. Soc., 1995, vol. 15, pp. 225–32.10.1016/0955-2219(95)93943-W ↗
22. R.S.M. Almeida, H. Farhandi, K. Tushtev, and K. Rezwan: J. Eur. Ceram. Soc., 2022, vol. 42, pp. 3282–89.10.1016/j.jeurceramsoc.2022.02.040 ↗
23. T. Zhu and Z. Wang: J. Eur. Ceram. Soc., 2023, vol. 43, pp. 6699–6717.10.1016/j.jeurceramsoc.2023.07.007 ↗
24. K.G.S. Pannu, T. Pannu, T. Fürstenhaupt, and V. Thangadurai: Solid State Ion., 2013, vol. 232, pp. 106–11.10.1016/j.ssi.2012.11.009 ↗
25. D. Ganguly, A. Bera, R. Hore, S. Khanra, P.K. Maji, D.K. Kotnees, and S. Chattopadhyay: Chem. Eng. J. Adv., 2022, vol. 11, p. 100338.10.1016/j.ceja.2022.100338 ↗
26. D.K. Koli, G. Agnihotri, and R. Purohit: Proc. Mater. Sci., 2014, vol. 6, pp. 567–89.10.1016/j.mspro.2014.07.072 ↗
27. S.V. Krishnan, M.M. Ambalam, R. Venkatesan, J. Mayandi, and V. Venkatachalapathy: Ceram. Int., 2021, vol. 47, pp. 23693–23701.10.1016/j.ceramint.2021.05.146 ↗
28. M.J. Kruszewski, M. Kot, K. Cymerman, M. Chmielewski, D. Moszczyńska, M. Małek, and Ł Ciupiński: Ceram. Int., 2023, vol. 49, pp. 9560–65.10.1016/j.ceramint.2022.11.124 ↗
29. E.V. Suslova, A.P. Kozlov, S.A. Chernyak, and S.V. Savilov: Russ. Chem. Bull., 2023, vol. 72, pp. 345–66. https://doi.org/10.1007/s11172-023-3804-4.10.1007/s11172-023-3804-4 ↗
30. H. Biçer, M. Tuncer, H. Göçmez, I. Bogomol, V. Kolesnichenko, and A. Ragulya: J. Wuhan Univ. Technol. Mater. Sci. Ed., 2024, vol. 39, pp. 645–50. https://doi.org/10.1007/s11595-024-2921-7.10.1007/s11595-024-2921-7 ↗
31. J. Li, M. Wen, Y. Gong, and Z. Zhao: Bull. Mater. Sci., 2024, vol. 47, p. 145. https://doi.org/10.1007/s12034-024-03208-1.10.1007/s12034-024-03208-1 ↗
32. X.Y. Li, Z.H. Zhang, X.W. Cheng, G.J. Huo, S.Z. Zhang, and Q. Song: Powder Metall. Met. Ceram., 2021, vol. 60, pp. 410–38. https://doi.org/10.1007/s11106-021-00254-w.10.1007/s11106-021-00254-w ↗
33. A.J. Michalski and M. Rosiński: J. Am. Ceram. Soc., 2008, vol. 91(11), pp. 3560–65. https://doi.org/10.1111/j.1551-2916.2008.02738.x.10.1111/j.1551-2916.2008.02738.x ↗
34. M.J. Kruszewski, K. Cymerman, R. Zybała, M. Chmielewski, M. Kowalczyk, J. Zdunek, and Ł Ciupiński: J. Alloys Compd., 2022, vol. 909, p. 164796.10.1016/j.jallcom.2022.164796 ↗
35. A. Michalski, J. Jaroszewicz, and M. Rosinski: Int. J. Self-Propag. High Temp. Synth., 2003, vol. 12, pp. 237–46.
36. J.R. Groza and A. Zavaliangos: Rev. Adv. Mater. Sci., 2003, vol. 5, pp. 24–33.
37. A. Michalski, J. Jaroszewicz, M. Rosiński, and D. Siemiaszko: Intermetallics, 2006, vol. 14, pp. 603–06.10.1016/j.intermet.2005.10.003 ↗
38. M. Rosinski, E. Fortuna, A. Michalski, Z. Pakiela, and K.J. Kurzydlowski: Fusion Eng. Des., 2007, vol. 82, pp. 2621–26.10.1016/j.fusengdes.2007.06.017 ↗
39. ASTM: D3766–08(2018)-Standard Terminology Relating to Catalysts and Catalysis, ASTM International, West Conshohocken, 2018.
40. EN 623-2 (1993) Advanced Technical Ceramics—Determination of Density and Porosity, 1993.
41. V. Mote, Y. Purushotham, and B. Dole: J. Theor. Appl. Phys., 2012, vol. 6, p. 6.10.1186/2251-7235-6-6 ↗
42. C. Suryanarayana and M.G. Norton: in X-Ray Diffraction: A Practical Approach. C. Suryanarayana and M.G. Norton, eds., Springer, Boston, 1998, pp. 63–94.10.1007/978-1-4899-0148-4_3 ↗
43. ASTM: E384-17, Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International, West Conshohocken, 2017. www.astm.org.
44. K.K. Chawla: in Composite Materials: Science and Engineering. K.K. Chawla, ed., Springer, Cham, 2019, pp. 3–6.10.1007/978-3-030-28983-6_1 ↗
45. P.K. Mallick: Fiber-Reinforced Composites: Materials, Manufacturing, and Design, 3rd ed. CRC Press, Boca Raton, 2007.10.1201/9781420005981 ↗
46. B. Cantor, F.P.E. Dunne, and I.C. Stone, eds.: Metal and Ceramic Matrix Composites, CRC Press, Boca Raton, 2003.
47. K. Niihara, R. Morena, and D.P.H. Hasselman: J. Mater. Sci. Lett., 1982, vol. 1, pp. 13–16.10.1007/BF00724706 ↗
48. J. Michalski, T. Wejrzanowski, R. Pielaszek, K. Konopka, W. Łojkowski, and K.J. Kurzydłowski: Mater. Sci. Pol., 2005, vol. 23(1), pp. 79–86.
49. T. Wejrzanowski, W. Spychalski, K. Różniatowski, and K. Kurzydłowski: Int. J. App. Math. Comput. Sci., 2008, vol. 18, pp. 33–39.10.2478/v10006-008-0003-1 ↗
50. T. Wejrzanowski and K.J. Kurzydlowski: Solid State Phenom., 2003, vol. 94, pp. 221–28.10.4028/www.scientific.net/SSP.94.221 ↗
51. R. Atkinson, W. Bamford, E. Broch, D. Deere, J. Franklin, C. Nieble, F. Rummel, P. Tarkoy, and H. Vanduyse: Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 1978, vol. 15, pp. 89–97.
52. ASTM: D3967-95a: Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens. ASTM International, West Conshohocken, 1996.
53. M. Hangl, A. Börger, R. Danzer, and H.M. Luxner: in Fracture Mechanics of Ceramics: Crack-Microstructure Interaction, R-Curve Behavior, Environmental Effects in Fracture, and Standardization, vol. 13, R.C. Bradt, D. Munz, M. Sakai, V.Y. Shevchenko, and K. White, eds., Springer, Boston, 2002, pp. 159–67.10.1007/978-1-4757-4019-6_12 ↗
54. I. Doltsinis and F. Osterstock: Arch. Comput. Methods Eng., 2005, vol. 12, pp. 303–36.10.1007/BF02736178 ↗
55. M. Krasnowski, S. Gierlotka, S. Ciołek, and T. Kulik: Adv. Powder Technol., 2019, vol. 30, pp. 1312–18.10.1016/j.apt.2019.04.006 ↗
56. J. Zygmuntowicz, P. Falkowski, M. Wachowski, K. Cymerman, P. Piotrkiewicz, and W. Kaszuwara: Int. J. Appl. Ceram. Technol., 2020, vol. 17, pp. 1731–41.10.1111/ijac.13487 ↗
57. J. Zygmuntowicz, K. Konopka, M. Krasnowski, P. Piotrkiewicz, J. Bolek, M. Wachowski, R. Żurowski, and M. Szafran: Compos. Powder Mater., 2022, vol. 15, p. 2920.
58. Y. Yuan, J. Fan, J. Li, J. Liu, K. Zhao, D. Liu, and L. An: Ceram. Int., 2020, vol. 46, pp. 15670–73.10.1016/j.ceramint.2020.03.117 ↗
59. Z. Sun, B. Li, P. Hu, F. Ding, and F. Yuan: J. Alloys Compd., 2016, vol. 688, pp. 933–38.10.1016/j.jallcom.2016.07.122 ↗
60. Y. Ouyang, L. Bai, Z. Sun, F. Ding, and F. Yuan: Ceram. Int., 2019, vol. 45, pp. 2012–19.10.1016/j.ceramint.2018.10.099 ↗