journal article·2024-12Open access

A General Model for the Ductility of Intermetallics Applied to Fe-Co Alloys

Wesley Everhart, Joseph Newkirk

Abstract

Abstract The mechanical properties, specifically ductility, of high performing soft magnets such as Fe-Co alloys are a limiting factor to their broader use in a number of systems. The understanding of the mechanical robustness in these materials is currently insufficient to be able to support the growing interest in applications such as magnetic shielding or electric motors. Fe-Co alloys provide the highest commercially available magnetic saturation and high magnetic permeability but have very poor ductility. The addition of vanadium to these alloys has allowed for significant commercialization and some ductility improvements, but the fundamental reasons for the observed improvements are not well understood. In most published work on mechanical properties in these alloys, the precise chemistry of the alloys investigated, often a critical aspect of intermetallics, is not reported or controlled and thermal history is unclear. This work creates a ductility model that is sensitive to changes in chemistry and can predict relative strain to failure as well as brittle fracture mode for intermetallics and is applied to Fe-Co alloys. Through the application of density functional theory (DFT), this model identifies defect stabilities, anti-phase boundary (APB) energies, the energy necessary to cross-slip, and cleavage energies and combines them through energetic competition to determine a relative failure strain. The model correctly predicts ductility improvements with the addition of vanadium as well as the transition from intergranular to transgranular cleavage, though more precise experiments are necessary to appropriately validate the various improvements observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Magnetic Properties of Alloys · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. J.H. White and C.V. Wahl: inventors Bell Telephone Laboratories Inc, assignee: United States patent US 1,862,559, 1932.
2. T. Sourmail: Prog. Mater. Sci., 2005, vol. 50(7), pp. 816–80.10.1016/j.pmatsci.2005.04.001 ↗
3. D.R. Thornburg: J. Appl. Phys., 1969, vol. 40(3), pp. 1579–80.10.1063/1.1657779 ↗
4. M.W. Branson, R.V. Major, C. Pitt, and R.D. Rawlings: J. Magn. Magn. Mater., 1980, vol. 19(1–3), pp. 222–24.10.1016/0304-8853(80)90597-1 ↗
5. C.D. Pitt and R.D. Rawlings: Met. Sci., 1983, vol. 17(6), pp. 261–66.10.1179/030634583790420835 ↗
6. L. Ren, S. Basu, Y.U. R-Hai, J.Q. Xiao, and A. Parvizi-Majidi: J. Mater. Sci., 2001, vol. 36, pp. 1451–57.10.1023/A:1017588411888 ↗
7. E.P. George, A.N. Gubbi, and I. Baker: L. R. Mater. Sci. Eng. A, 2002, vol. 329–331, pp. 325–33.10.1016/S0921-5093(01)01594-5 ↗
8. C. Hou, Y. Shan, H. Wu, and X. Bi: J. Alloys Compd., 2013, vol. 556, pp. 51–55.10.1016/j.jallcom.2012.12.044 ↗
9. L.I.E. Zhao and I. Baker: Acta Metall. Mater., 1994, vol. 42, pp. 2–7.
10. M. Mizuno, H. Araki, and Y. Shirai: Mater. Trans., 2005, vol. 46, pp. 1112–16.10.2320/matertrans.46.1112 ↗
11. Carpenter Technology Corporation: Technical Datasheet, 2017, pp. 1–9.
12. J.W.J. Morris, K.H.J. Buschow, M.C. Flemmings, E.J. Kramer, P. Veyssiere, R.W. Cahn, B. Ilschner, and S. Mahajan: Encyclopedia of Materials: Science and Technology, 2nd ed. Elsevier, 2001.
13. D. Hull and D.J. Bacon: Introduction to Dislocations, Elsevier, 2011.
14. C.T. Liu, J.O. Stiegler, F.H. Froes, and ASM Handbook Committee. ASM handbook vol. 2 properties and selection: nonferrous alloys and special-purpose materials, 1990, pp. 913–42.10.31399/asm.hb.v02.a0001102 ↗
15. V. Paidar: Philos. Mag. A, 2001, vol. 81, pp. 1065–77.10.1080/01418610108214429 ↗
16. K. Sadananda and M.J. Marcinkowski: J. Appl. Phys., 1973, vol. 44, pp. 4445–54.10.1063/1.1661980 ↗
17. M.J. Sheng-Ti Fong and K.S. Marcinkowski: Acta Metall., 1972, p. 21.
18. N.S. Stoloff and R.G. Davies: Acta Metall., 1964, p. 12.10.1016/0001-6160(64)90019-7 ↗
19. W.L. Bragg, F.R.S., and E.J. Williams: Proc. R. Soc. London. Ser. A - Math. Phys. Sci., 1935, vol. 152, pp. 231–52.10.1098/rspa.1935.0188 ↗
20. M.J. Marcinkowski and H. Chessin: Philos. Mag., 1964, vol. 10, pp. 837–59.10.1080/14786436408225388 ↗
21. J.F. Dinhut, J.C. Desoyer, and P. Moine: J. Phys., 1974, vol. 35, pp. 447–53.10.1051/jphys:01974003505044700 ↗
22. H. Gholizadeh and S. Hasani: Comput. Mater. Sci., 2018, vol. 143, pp. 515–27.10.1016/j.commatsci.2017.11.050 ↗
23. V. Vitek, M. Yan, N.S. Stoloff, and V.K. Sikka: Physical Metallurgy and Processing of Intermetallic Compounds, 1996, p. 28.10.1007/978-1-4613-1215-4_2 ↗
24. T.N. Lamichhane, L. Sethuraman, A. Dalagan, H. Wang, J. Keller, and M.P. Paranthaman: Mater. Today Phys., 2020, vol. 15, p. 100255.10.1016/j.mtphys.2020.100255 ↗
25. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 47, p. 558.10.1103/PhysRevB.47.558 ↗
26. G. Kresse and J. Hafner: Phys. Rev. B, 1994, vol. 49, p. 14251.10.1103/PhysRevB.49.14251 ↗
27. G. Kresse and J. Furthmuller: Phys. Rev. B, 1996, vol. 54, p. 11169.10.1103/PhysRevB.54.11169 ↗
28. G. Kresse and J. Furthmuller: Comput. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
29. PE Blochl: Phys. Rev. B, 1994, p. 50.
30. G. Kresse and J.M. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
31. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, p. 3865.10.1103/PhysRevLett.77.3865 ↗
32. J.P. Perdew, et al.: Phys. Rev. B, 1992, vol. 46, p. 6671.10.1103/PhysRevB.46.6671 ↗
33. J.P. Perdew, et al.: Phys. Rev. B, 1993, vol. 48, p. 4978.10.1103/PhysRevB.48.4978.2 ↗
34. J.P. Perdew, et al.: Phys. Rev. Lett., 2008, vol. 100, p. 136406.10.1103/PhysRevLett.100.136406 ↗
35. D. Rodney, J. Bonneville, K. Hono, and D.E. Laughlin: Physical Metallurgy, Elsevier, 2014, pp. 1591–680.10.1016/B978-0-444-53770-6.00016-2 ↗
36. Y. Yu, W. Xiao, J. Wang, and L. Wang: Phys. Chem. Chem. Phys., 2016, vol. 18, pp. 26616–22.10.1039/C6CP02983C ↗