journal article·2024-09

Hot-Isostatic Pressed Al Melt-Spun Ribbons with Tailored Microstructures and Mechanical Properties for Metallic Optics

Zhilin Liu, Taili Chen, Ruiying Shu, Jingya Wang, Gang Sha, Javier Llorca

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Surface Roughness and Optical Measurements · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. R. Steinkopf, A. Gebhardt, S. Scheiding, M. Rohde, O. Stenzel, S. Gliech, V. Giggel, H. Löscher, G. Ullrich, P. Rucks, A. Duparre, S. Risse, R. Eberhardt, and A. Tünnermann: Proc. SPIE, 2008, vol. 7102, p. 71020C. https://doi.org/10.1117/12.797702.10.1117/12.797702 ↗
2. T. Newswander, B. Crowther, G. Gubbels, and R. Senden: Proc. SPIE, 2013, vol. 8837, p. 883704. https://doi.org/10.1117/12.2024369.10.1117/12.2024369 ↗
3. S. Kirschstein, A. Koch, J. Schöneich, and F. Döngi: Proc. SPIE, 2005, vol. 5962, p. 59621M. https://doi.org/10.1117/12.624354.10.1117/12.624354 ↗
4. K. Liu, H. Wu, P. Liu, and K.C. Shaw: Int. J. Nanomanuf., 2011, vol. 7, pp. 116–25. https://doi.org/10.1504/IJNM.2011.040718.10.1504/IJNM.2011.040718 ↗
5. J.M. Elson, J.P. Rahn, and J.M. Bennett: Appl. Opt., 1983, vol. 22, p. 3207. https://doi.org/10.1364/ao.22.003207.10.1364/ao.22.003207 ↗
6. G.P.H. Gubbels, B.W.H. van Venrooy, A.J. Bosch, and R. Senden: Proc. SPIE, 2008, vol. 7018, p. 70183A. https://doi.org/10.1117/12.788766.10.1117/12.788766 ↗
7. O. Wouters, W.P. Vellinga, R. van Tijum, and JTh.M. de Hosson: Acta Mater., 2005, vol. 53, pp. 4043–50. https://doi.org/10.1016/j.actamat.2005.05.007.10.1016/j.actamat.2005.05.007 ↗
8. M. Zaiser, F. Madani, V. Koutsos, and E.C. Aifantes: Phys. Rev. Lett., 2004, vol. 93, p. 195507. https://doi.org/10.1103/PhysRevLett.93.195507.10.1103/PhysRevLett.93.195507 ↗
9. A.R. Hinkle, W.G. Nöhring, R. Leute, T. Junge, and L. Pastewka: Sci. Adv., 2020, vol. 6, p. 0847. https://doi.org/10.1126/sciadv.aax0847.10.1126/sciadv.aax0847 ↗
10. S. To, W.B. Lee, and C.F. Cheung: J. Mater. Process. Tech., 2003, vol. 140, pp. 346–51. https://doi.org/10.1016/S0924-0136(03)00756.10.1016/S0924-0136(03)00756 ↗
11. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421–80. https://doi.org/10.1016/j.pmatsci.2007.10.001.10.1016/j.pmatsci.2007.10.001 ↗
12. L. Katgerman and F. Dom: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 1212–16. https://doi.org/10.1016/j.msea.2003.10.094.10.1016/j.msea.2003.10.094 ↗
13. F.A.C.M. Habraken, Consolidation, plastic yield and formability of rapidly solidified Al-Si-X alloys, PhD thesis, Technische Universiteit Eindhoven, 1996.
14. E.J. Lavernia, J.D. Ayers, and T.S. Srivatsan: Int. Mater. Rev., 1992, vol. 37, pp. 1–44. https://doi.org/10.1179/imr.1992.37.1.1.10.1179/imr.1992.37.1.1 ↗
15. S.N. Samaras and G.N. Haidemenopoulos: J. Mater. Process. Tech., 2007, vol. 194, pp. 63–73. https://doi.org/10.1016/j.jmatprotec.2007.03.126.10.1016/j.jmatprotec.2007.03.126 ↗
16. H. Agrawal, A.M. Gokhale, S. Graham, M.F. Horstemeyer, and D.J. Bamman: Mater. Sci. Eng. A, 2002, vol. 328, pp. 310–16. https://doi.org/10.1016/S0921-5093(01)01833-0.10.1016/S0921-5093(01)01833-0 ↗
17. J. Buha, R.N. Lumley, A.G. Crosky, and K. Hono: Acta Mater., 2007, vol. 55, pp. 3015–24. https://doi.org/10.1016/j.actamat.2007.01.006.10.1016/j.actamat.2007.01.006 ↗
18. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–3904. https://doi.org/10.1016/S1359-6454(98)00059-7.10.1016/S1359-6454(98)00059-7 ↗
19. I. Dutta and S.M. Allen: J. Mater. Sci. Lett., 1991, vol. 10, pp. 323–26. https://doi.org/10.1007/BF00719697.10.1007/BF00719697 ↗
20. W.D. Callister Jr.: Fundamentals of Materials Science and Engineering, 5th ed. John Wiley & Sons Inc, USA, 2001.
21. K. Buchanan, K. Colas, J. Ribis, A. Lopez, and J. Garnier: Acta Mater., 2017, vol. 132, pp. 209–21. https://doi.org/10.1016/j.actamat.2017.04.037.10.1016/j.actamat.2017.04.037 ↗
22. C.L. He, W.J. Zong, C.X. Xue, and T. Sun: Int. J. Mach. Tools Manuf, 2018, vol. 134, pp. 42–68. https://doi.org/10.1016/j.ijmachtools.2018.07.004.10.1016/j.ijmachtools.2018.07.004 ↗
23. K. Dehghani, M. Salehi, M. Salehi, and H. Aboutalebi: Mater. Sci. Eng. A, 2008, vol. 489, pp. 245–52. https://doi.org/10.1016/j.msea.2007.12.017.10.1016/j.msea.2007.12.017 ↗
24. Z.L. Liu, R.Q. Li, R.P. Jiang, L.H. Zhang, and X.Q. Li: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1146–52. https://doi.org/10.1007/s11661-018-5097-y.10.1007/s11661-018-5097-y ↗