journal article·2020-05

Development of (Nb0.75,Ti0.25)C-Reinforced Cast Duplex Stainless Steel Composites

Wen Hao Kan, Ziyan Man, Siyu Huang, Kevin Dolman, Timothy Lucey, Xinhu Tang, Li Chang, Gwénaëlle Proust, Julie Cairney

Publisher page

Abstract

Improvements to the wear performance of CD4MCu (a cast Fe-Cr-Ni-Cu-Mo duplex stainless steel grade) would be of great benefit in pump applications. This study demonstrates that CD4MCu stainless steels reinforced with (Nb0.75,Ti0.25)C particles can be fabricated by simply melting the elements required for the CD4MCu stainless steel together with the amounts of Nb, Ti and C required to achieve a specific volume fraction of (Nb0.75,Ti0.25)C particles in a miniature laboratory argon arc furnace. Their potential as erosion resistant materials was evaluated through microstructural characterization, hardness testing, and sliding wear tests. The formation of (Nb0.75,Ti0.25)C particles was found to improve the bulk hardness of the CD4MCu stainless steels without significantly altering its duplex microstructure, which then led to better wear performance. The results indicate that large-scale casting of the proposed materials should be possible and that they have potential as erosion resistant materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. [1] J. Yoganandh, S. Natarajan, and S.K. Babu: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3588-3598.10.1007/s11665-015-1611-1 ↗
2. [2] W.H. Kan, G. Proust, V. Bhatia, L. Chang, K. Dolman, T. Lucey, X. Tang, and J. Cairney: Wear, 2019, vol. 420, pp. 149-162.10.1016/j.wear.2018.09.013 ↗
3. [3] M. Martins, S.M. Rossitti, M. Ritoni, and L.C. Casteletti: Mater. Charact., 2007, vol. 58, pp. 909-916.10.1016/j.matchar.2006.09.006 ↗
4. [4] ASTM International. A781/A781M-18c Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use. West Conshohocken, PA; ASTM International, 2018.
5. [5] G. Atxaga, and A. Irisarri: Eng. Failure Anal., 2009, vol. 16, pp. 1412-1419.10.1016/j.engfailanal.2008.09.006 ↗
6. [6] J. Soyama, T.P. Lopes, G. Zepon, C.S. Kiminami, W.J. Botta, and C. Bolfarini: Met. Mater. Int., 2019, vol. 25, pp. 456-464.10.1007/s12540-018-0202-8 ↗
7. A. Do-Nascimento, V. Ocelík, M. Ierardi, and J.T.M. De Hosson: Surf. Coat. Technol., 2008, vol. 202, pp. 4758-65.10.1016/j.surfcoat.2008.04.061 ↗
8. [8] A. Rokanopoulou, P. Skarvelis, and G.D. Papadimitriou: Surf. Coat. Technol., 2014, vol. 254, pp. 376-381.10.1016/j.surfcoat.2014.06.047 ↗
9. [9] A. Rokanopoulou, and G. Papadimitriou: J. Coat. Technol. Res., 2011, vol. 8, pp. 427-437.10.1007/s11998-010-9283-0 ↗
10. [10] Y. B. Cao, H. T. Ren, C. S. Hu, Q. X. Meng, and Q. Liu: Mater. Lett., 2015, vol. 147, pp. 61-63.10.1016/j.matlet.2015.02.026 ↗
11. [11] S. Sarian, and H. Weart: J. Appl. Phys., 1966, vol. 37, pp. 1675-1681.10.1063/1.1708583 ↗
12. [12] A.K. Srivastava, and K. Das: Mater. Lett. 2008, vol. 62, pp. 3947-3950.10.1016/j.matlet.2008.05.049 ↗
13. A.K. Srivastava, and K. Das: Mater. Sci. Eng. A, 2009, vol. 516, pp. 1-6.10.1016/j.msea.2009.04.041 ↗
14. [14] A.K. Srivastava, and K. Das: Tribol. Int., 2010, vol. 43, pp. 944-950.10.1016/j.triboint.2009.12.057 ↗
15. K. Dolman: U.S. Patent No. US20130039800A1, Feb. 14, 2013.
16. [16] G. Samsonov, and G.S. Upadkhaya: Powder Metall. Met. Ceram. 1968, vol. 7, pp. 723-726.10.1007/BF00773741 ↗
17. [17] W.H. Kan, V. Bhatia, K. Dolman, T. Lucey, X. Tang, L. Chang, G. Proust, and J. Cairney: Wear, 2018, vol. 398, pp. 220-226.10.1016/j.wear.2017.12.011 ↗
18. [18] J. Brooks and A. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16-44.10.1179/imr.1991.36.1.16 ↗
19. [19] B. Gorr, M. Azim, H. J. Christ, H. Chen, D. V. Szabo, A. Kauffmann and M. Heilmaier: Metall. Mater. Trans. A, 2016, vol. 47, pp. 961-970.10.1007/s11661-015-3246-0 ↗
20. [20] J. Pfetzing-Micklich, C. Somsen, A. Dlouhy, C. Begau, A. Hartmaier, M.F.X. Wagner and G. Eggeler: Acta Mater., 2013, vol. 61, pp. 602-616.10.1016/j.actamat.2012.09.081 ↗
21. [21] C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671.10.1038/nmeth.2089 ↗
22. [22] ASTM International. C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics. West Conshohocken, PA; ASTM International, 2019.
23. [23] ASTM International. A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application. West Conshohocken, PA; ASTM International, 2018.
24. [24] J. P. Lai, Q. L. Pan, X. D. Wang, H. R. Cui, and Y. W. Sun: J. Mater. Eng. Perform., 2018, vol. 27, pp. 4373-4381.10.1007/s11665-018-3516-2 ↗
25. [25] L. Jinlong, L. Tongxiang, D. Limin, and W. Chen: Corros. Sci., 2016, vol. 104, pp. 144-151.10.1016/j.corsci.2015.12.005 ↗
26. [26] T. Headley and J. Brooks: Metall. Mater. Trans. A, 2002, vol. 33, pp. 5-15.10.1007/s11661-002-0001-0 ↗
27. [27] E. Charalampopoulou, N. Cautaerts, T. Van der Donck, D. Schryvers, K. Lambrinou and R. Delville: Scr. Mater., 2019, vol. 167, pp. 66-70.10.1016/j.scriptamat.2019.03.035 ↗
28. [28] H. Beladi, V. Tari, I.B. Timokhina, P. Cizek, G.S. Rohrer, A.D. Rollett, and P.D. Hodgson: Acta Mater., 2017, vol. 127, pp. 426-437.10.1016/j.actamat.2017.01.058 ↗
29. [29] E. F. D. Monlevade and I. G. S. Falleiros: Metall. Mater. Trans. A, 2006, vol. 37, pp. 939-949.10.1007/s11661-006-0067-1 ↗
30. [30] W. H. Kan, Z. J. Ye, Y. Zhu, V. K. Bhatia, K. Dolman, T. Lucey, X. Tang, G. Proust and J. Cairney: Mater. Charact., 2016, vol. 119, pp. 65-74.10.1016/j.matchar.2016.07.019 ↗
31. [31] L. Liao and S. Chumbley: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2322-2330.10.1007/s11661-019-05159-3 ↗
32. [32] A. Iost and R. Bigot: J. Mater. Sci., 1996, vol. 31, pp. 3573-3577.10.1007/BF00360764 ↗
33. [33] T. Fischer, Z. Zhu, H. Kim and D. Shin: Wear, 2000, vol. 245, pp. 53-60.10.1016/S0043-1648(00)00465-8 ↗
34. [34] C. Lim, S. Lim and M. Gupta: Wear, 2003, vol. 255, pp. 629-637.10.1016/S0043-1648(03)00121-2 ↗
35. [35] M. Ramachandra and K. Radhakrishna: Wear, 2007, vol. 262, pp. 1450-1462.10.1016/j.wear.2007.01.026 ↗
36. [36] D.H. Bacon, L. Edwards, J.E. Moffatt and M.E. Fitzpatrick: Int. J. Fatigue, 2013, vol. 48, pp. 39-47.10.1016/j.ijfatigue.2012.09.016 ↗
37. E. Pagounis and V.K. Lindroos: Mater. Sci. Eng. A, 1998, vol. 246, pp. 221-234.10.1016/S0921-5093(97)00710-7 ↗