journal article·2026-01Open access

Effect of Residual Elements on the Strength and Recrystallisation Kinetics in Nb-Based Microalloyed Steels During Hot Deformation

Mo Ji, Claire Davis

Abstract

Abstract Residual elements such as Cu and Sn have been introduced into steel due to increasing usage of steel scrap, which may influence the microstructural evolution during processing. This study investigates the solute drag effect of Cu (0.5 wt pct), Sn (0.3 wt pct) and Nb (0.035 wt pct) on recrystallisation kinetics in low carbon microalloyed steels during hot deformation. Double hit compression tests have been carried out at 1000 °C to 1050 °C and strain rates of 2 s −1 , to measure the solute retardation parameter (SRP). Results reveal that Nb exhibits the strongest individual retardation (SRP ≈ 383), consistent with literature, whilst the SRP has been measured to be 6 for Cu and 86 for Sn. In terms of the synergetic effect, Cu and Nb solute drag effect act additively, but Sn and Nb exhibit a negative synergy, reducing the combined SRP by 36 pct compared to a linear-addition prediction. This has been attributed to Sn having a high diffusivity and binding energy, which may saturate grain boundary vacancies and diminish Nb’s effectiveness. Stress–strain analysis reveals that the Sn addition increases the work hardening rate with increasing strain, unlike Cu and Nb. The observed two distinct solute–dislocation interaction behaviours during deformation further supports the hypothesis that Sn tends to have a stronger affinity to grain boundaries and dislocations at deformation temperatures of 1000 °C and 1050 °C, compared to Nb and Cu addition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. I. Kapoor, C. Davis, and Z. Li: Ironmak. Steelmak., 2021, vol. 48(6), pp. 712–27. https://doi.org/10.1080/03019233.2021.1898869.10.1080/03019233.2021.1898869 ↗
2. N. Mavrikakis, W. Saikaly, D. Mangelinck, and M. Dumont: Materialia, 2020, vol. 9, p. 100541. https://doi.org/10.1016/j.mtla.2019.100541.10.1016/j.mtla.2019.100541 ↗
3. W.T. Nachtrab and Y.T. Chou: J. Mater. Sci., 1984, vol. 19, pp. 2136–44. https://doi.org/10.1007/BF01058089.10.1007/BF01058089 ↗
4. Z. Song, H. Zhao, L. Yang, K. Wang, J. Gao, H. Wu, G. Wu, C. Zhang, Y. Huang, S. Wang, and X. Mao: Metall. Mater. Trans. A, 2024, vol. 55A, pp. 3956–67. https://doi.org/10.1007/s11661-024-07528-z.10.1007/s11661-024-07528-z ↗
5. Q. Zhu, J. Gao, H. Zhao, Y. Zhang, Y. Huang, S. Liu, W. Yang, K. Wang, S. Wang, H. Wu, C. Zhang, and X. Mao: J. Mater. Sci. Technol., 2025, vol. 221, pp. 143–54. https://doi.org/10.1016/j.jmst.2024.09.031.10.1016/j.jmst.2024.09.031 ↗
6. D. Raabe, M. Jovicevic-Klug, D. Ponge, A. Gramlich, A. Kwiatkowski da Silva, A.N. Grundy, H. Springer, I. Souza Filho, and Y. Ma: Annu. Rev. Mater. Res., 2024, vol. 54, pp. 111–51. https://doi.org/10.1146/annurev-matsci-080222-123648.10.1146/annurev-matsci-080222-123648 ↗
7. C. Bernhard, G. Gaiser, M. Bernhard, J. Winkler, M. Kern, P. Presoly, and Y. Kang: Steel Res. Int., 2024, vol. 96(5), p. 2400494. https://doi.org/10.1002/srin.202400494.10.1002/srin.202400494 ↗
8. D.A. Melford: Philos. Trans. R. Soc. Lond. A, 1980, vol. 295, pp. 89–103. https://doi.org/10.1098/rsta.1980.0078.10.1098/rsta.1980.0078 ↗
9. I. Kapoor, C. Davis, and Z. Li: Steel Res. Int., 2024, vol. 95, p. 400116. https://doi.org/10.1002/srin.202400116.10.1002/srin.202400116 ↗
10. Z. Liu, M. Kuwabara, R. Satake, and T. Nagata: ISIJ Int., 2009, vol. 49(7), pp. 1087–93. https://doi.org/10.2355/isijinternational.49.1087.10.2355/isijinternational.49.1087 ↗
11. J. Cejka, I. Gruber, G. Klosch, and S.K. Michelic: J. Mater. Res. Technol., 2025, vol. 36, pp. 513–21. https://doi.org/10.1016/j.jmrt.2025.03.150.10.1016/j.jmrt.2025.03.150 ↗
12. Z. Xie, W. Hui, Y. Zhang, and X. Zhao: J. Mater. Res. Technol., 2022, vol. 18, pp. 1307–21. https://doi.org/10.1016/j.jmrt.2022.03.077.10.1016/j.jmrt.2022.03.077 ↗
13. J. Duan, D. Farrugia, C. Davis, and Z. Li: Ironmak. Steelmak., 2022, vol. 49(2), p. 1972270. https://doi.org/10.1080/03019233.2021.1972270.10.1080/03019233.2021.1972270 ↗
14. M.G. Akben, B. Bacroix, and J.J. Jonas: Acta Metall., 1983, vol. 31(1), pp. 161–74. https://doi.org/10.1016/0001-6160(83)90076-7.10.1016/0001-6160(83)90076-7 ↗
15. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98. https://doi.org/10.1016/0001-6160(62)90092-5.10.1016/0001-6160(62)90092-5 ↗
16. R.L. Gall and J.J. Jonas: Acta Mater., 1999, vol. 47(17), pp. 4365–74. https://doi.org/10.1016/S1359-6454(99)00319-5.10.1016/S1359-6454(99)00319-5 ↗
17. M.G. Akben, T. Chandra, P. Plassiard, and J.J. Jonas: Acta Mater., 1984, vol. 32(4), pp. 591–601. https://doi.org/10.1016/0001-6160(84)90070-1.10.1016/0001-6160(84)90070-1 ↗
18. H.L. Andrade, M.G. Akben, and J.J. Jonas: Metall. Trans. A, 1983, vol. 14A(10), pp. 1967–77. https://doi.org/10.1007/BF02662364.10.1007/BF02662364 ↗
19. C.L. Miao, C.J. Shang, H.S. Zurob, G.D. Zhang, and S.V. Subramanian: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 665–76. https://doi.org/10.1007/s11661-011-0895-5.10.1007/s11661-011-0895-5 ↗
20. M. Hoerner, J.G. Speer, and M.E. Eberhart: ISIJ Int., 2017, vol. 57, pp. 1847–50. https://doi.org/10.2355/isijinternational.ISIJINT-2017-096.10.2355/isijinternational.ISIJINT-2017-096 ↗
21. D. Scheiber: Comput. Mater. Sci., 2024, vol. 245, p. 113328. https://doi.org/10.1016/j.commatsci.2024.113328.10.1016/j.commatsci.2024.113328 ↗
22. A. Suhane, D. Scheiber, V.I. Razumovskiy, and M. Militzer: Comput. Mater. Sci., 2023, vol. 228, p. 112300. https://doi.org/10.1016/j.commatsci.2023.112300.10.1016/j.commatsci.2023.112300 ↗
23. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, 7th ed. Reed Educational and Professional Publishing, Oxford, 1992, pp. 13-9–33.
24. J. Gao, S. Jiang, and H. Zhang: Nature, 2021, vol. 590, pp. 262–67. https://doi.org/10.1038/s41586-021-03246-3.10.1038/s41586-021-03246-3 ↗
25. H. Ohtsuka, G. Ghosh, and K. Nagai: ISIJ Int., 1997, vol. 37(3), pp. 296–301. https://doi.org/10.2355/isijinternational.37.296.10.2355/isijinternational.37.296 ↗
26. K. Nakashima, K. Imakawa, Y. Futamura, T. Tsuchiyama, and S. Takaki: Mater. Sci. Forum, 2004, vol. 467–470, pp. 905–10. https://doi.org/10.4028/www.scientific.net/MSF.467-470.905.10.4028/www.scientific.net/MSF.467-470.905 ↗
27. W. Hou, Q. Liu, and J. Gu: Mater. Sci. Eng. A, 2020, vol. 780, p. 139186. https://doi.org/10.1016/j.msea.2020.139186.10.1016/j.msea.2020.139186 ↗
28. G. Mandal, S.K. Ghosh, D. Chakrabarti, and S. Chatterjee: Phys. Met. Metallogr., 2020, vol. 121, pp. 269–75. https://doi.org/10.1134/S0031918X2002012X.10.1134/S0031918X2002012X ↗
29. H. Song, J. Yoo, S. Kim, S. Sohn, M. Koo, N. Kim, and S. Lee: Acta Mater., 2017, vol. 135, pp. 215–25. https://doi.org/10.1016/j.actamat.2017.06.035.10.1016/j.actamat.2017.06.035 ↗
30. G. Yeli, M.A. Auger, K. Wilford, G.D.W. Smith, P.A.J. Bagot, and M.P. Moody: Acta Mater., 2017, vol. 125, pp. 38–49. https://doi.org/10.1016/j.actamat.2016.11.052.10.1016/j.actamat.2016.11.052 ↗
31. C. Antonione, G.D. Gatta, A. Lucci, G. Riontino, and G. Venturello: Acta Metall., 1970, vol. 18, pp. 1169–80. https://doi.org/10.1016/0001-6160(70)90107-0.10.1016/0001-6160(70)90107-0 ↗
32. Y. Futamura, T. Tsuchiyama, and S. Takaki: ISIJ Int., 1999, vol. 85(9), pp. 697–702. https://doi.org/10.2355/tetsutohagane1955.85.9_697.10.2355/tetsutohagane1955.85.9_697 ↗
33. M.C. Somani and L.P. Karjalainen: Mater. Sci. Forum, 2004, vol. 467–470, pp. 335–40. https://doi.org/10.4028/www.scientific.net/MSF.467-470.335.10.4028/www.scientific.net/MSF.467-470.335 ↗
34. S. Chen, R. Zhu, L. Xue, T. Lin, J. Li, and Y. Lin: Int. J. Miner. Metall. Mater., 2015, vol. 22, pp. 141–48. https://doi.org/10.1007/s12613-015-1054-6.10.1007/s12613-015-1054-6 ↗
35. J. Han, Y. Li, Z. Jiang, Y. Yang, X. Wang, L. Wang, and K. Li: Adv. Mater. Res., 2013, vol. 773, pp. 406–11. https://doi.org/10.4028/www.scientific.net/AMR.773.406.10.4028/www.scientific.net/AMR.773.406 ↗
36. R. Suehiro, Y. Hayakawa, and T. Takamiya: ISIJ Int., 2019, vol. 59(2), pp. 351–58. https://doi.org/10.2355/isijinternational.ISIJINT-2018-223.10.2355/isijinternational.ISIJINT-2018-223 ↗
37. E.A. Simielli, S. Yue, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 597–608. https://doi.org/10.1007/BF02801177.10.1007/BF02801177 ↗
38. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, pp. 197–206. https://doi.org/10.1179/mst.1987.3.3.197.10.1179/mst.1987.3.3.197 ↗
39. G. Salje and M. Feller-Kniepmeier: J. Appl. Phys., 1977, vol. 48, pp. 1833–39. https://doi.org/10.1063/1.323934.10.1063/1.323934 ↗
40. K. Ito, T. Mitsunobu, Y. Ishiguro, Y. Kohigasha, and K. Tsutsui: Phys. Rev. Mater., 2022, vol. 6, p. 093603. https://doi.org/10.1103/PhysRevMaterials.6.093603.10.1103/PhysRevMaterials.6.093603 ↗
41. S. Kurokawa, J.E. Ruzzante, A.M. Hey, and F. Dyment: Met. Sci., 1983, vol. 17, pp. 433–38. https://doi.org/10.1179/030634583790420628.10.1179/030634583790420628 ↗
42. X.L. He, M. Djahazi, J.J. Jonas, and J. Jackman: Acta Metall. Mater., 1991, vol. 39(10), pp. 2295–2308. https://doi.org/10.1016/0956-7151(91)90012-P.10.1016/0956-7151(91)90012-P ↗
43. K. Kimura, Y. Iijima, and K. Hirano: Trans. Jpn Inst. Met., 1986, vol. 27(1), pp. 1–4. https://doi.org/10.2320/matertrans1960.27.1.10.2320/matertrans1960.27.1 ↗
44. J. Takahashi, K. Kawakami, J. Hamda, and K. Kimura: Acta Mater., 2016, vol. 107, pp. 415–22. https://doi.org/10.1016/j.actamat.2016.01.070.10.1016/j.actamat.2016.01.070 ↗