journal article·2025-08Open access

Microstructure and Creep Performance of Direct Single-Step Aged Gas Metal Arc Directed Energy Deposition Processed Haynes 282

Sophia Hill, Jamie McIntyre, Jonah Klemm-Toole

Abstract

Abstract There is a need to rapidly produce large components for power generation technologies to reduce plant down time. Directed energy deposition processes can provide the high deposition rates needed to rapidly produce large components, but the microstructures and resulting high-temperature mechanical properties must be understood. In this work, a gamma prime (γ′) strengthened nickel-based alloy, Haynes 282, was processed with gas metal arc directed energy deposition (GMA-DED), and direct single-step aged at 800 °C for 8 hours before creep testing at 760 °C. The builds exhibited large columnar grains elongated parallel to the build direction and variations in γ′ size and distribution throughout the dendritic structure. Samples tested parallel to the build direction showed lower minimum creep rates and long creep lives compared to samples tested perpendicular to the build direction, but the overall creep performance of GMA-DED samples was comparable to that of wrought Haynes 282. Failed GMA-DED creep samples exhibited a unique combination of intergranular creep voids as well as transgranular creep fracture associated with gamma prime depletion along glide planes. This work shows that GMA-DED is a viable route to produce structural components, but further work is needed to better understand creep deformation and fracture mechanisms.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Z. Huda, T. Zharinie, and H. Al-Ansary: Int. J. Mech. Mater. Eng., 2014. https://doi.org/10.1186/s40712-014-0002-y.10.1186/s40712-014-0002-y ↗
2. A. Shaikh, F. Schulz, K. Minet-Lallemand, and E. Hryha: Mater. Today Commun., 2021. https://doi.org/10.1016/j.mtcomm.2021.102038.10.1016/j.mtcomm.2021.102038 ↗
3. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2009, pp. 33–120. https://doi.org/10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
4. C.T. Sims: in Superalloys 1984, Warrendale, PA, 1984.
5. W.S. James: Cranfield University, 2023. https://doi.org/10.1080/13621718.2023.218792510.1080/13621718.2023.2187925 ↗
6. D. Svetlizky, M. Das, B. Zheng, A. Vyatskikh, S. Bose, A. Bandyopadhyay, J. Schoenung, E. Lavernia, and N. Eliaz: Mater. Today, 2021, vol. 49, pp. 271–95. https://doi.org/10.1016/j.mattod.2021.03.020.10.1016/j.mattod.2021.03.020 ↗
7. M. Kohler, L. Sin, J. Hensel, S. Pallaspuro, J. Komi, K. Dilger, and Z. Zhang: Mater. Des., 2021. https://doi.org/10.1016/j.matdes.2021.110122.10.1016/j.matdes.2021.110122 ↗
8. A. Dass and A. Moridi: Coatings, 2019. https://doi.org/10.3390/coatings9070418.10.3390/coatings9070418 ↗
9. P. Gradl, N. Andrews, and O. Mireles: Scitech, 2024.
10. Z. Huda: Mater. Des., 2009, vol. 30, pp. 3121–25. https://doi.org/10.1016/j.matdes.2008.11.030.10.1016/j.matdes.2008.11.030 ↗
11. Z. Huda: J. Mater. Eng. Perform., 1995, vol. 4, pp. 48–53. https://doi.org/10.1007/BF02682704.10.1007/BF02682704 ↗
12. K.L. Kruger: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Woodhead Publishing, Kokomo, 2017, pp. 511–45.10.1016/B978-0-08-100552-1.00015-4 ↗
13. M. Zinke, S. Burger, and S. Juttner: Materials, 2023. https://doi.org/10.3390/ma16041715.10.3390/ma16041715 ↗
14. Z. Huda, T. Zaharinie, and S. Islam: IJPS, 2011, vol. 6 pp. 703–07. https://doi.org/10.5897/IJPS11.245.10.5897/IJPS11.245 ↗
15. Haynes International: HAYNES 282 Alloy, Haynes International, 2023.
16. A. Fredholm and J.L. Strudel, in Superalloys 1984, Warrendale, PA, 1984.
17. E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman: in Superalloys, 2012, pp. 577–86.10.1002/9781118516430 ↗
18. K.A. Unocic, M. Kirka, E. Cakmak, D. Greeley, A. Okello, and S. Dryepondt: Scripta Mater., 2019, vol. 162, p. 416. https://doi.org/10.1016/j.scriptamat.2018.11.045.10.1016/j.scriptamat.2018.11.045 ↗
19. J. Boswell, J. Jones, N. Barnard, D. Clark, M. Whittaker, and R. Lancaster: Mater. Des., 2021. https://doi.org/10.1016/j.matdes.2021.109725.10.1016/j.matdes.2021.109725 ↗
20. K.A. Christofidou, H.T. Pang, W. Li, Y. Parchi, C.N. Jones, N.G. Jones, and H.J. Stone, in Superalloys 2020, 2020. https://doi.org/10.1007/978-3-030-51834-9_9910.1007/978-3-030-51834-9_99 ↗
21. K.A. Unocic, M. Kirka, E. Cakmak, D. Greeley, A. Okello, and S. Dryepondt: Mater. Sci. Eng. A, 2020, vol. 772, p. 138607. https://doi.org/10.1016/j.msea.2019.138607.10.1016/j.msea.2019.138607 ↗
22. S. Dryepondt and K. Unocic, in Joint EPRI – 123HiMAT International Conference on High Temperature Materials, Nagasaki, 2019.
23. A. Cervellon, M. Sazerat, R. Bordas, G. Burlot, L. Barot, S. Gillet, A. Nait-Ali, P. Villechaise, R. Fortunier, and J. Cormier, in Superalloys 2024, 2024.
24. E. Jang, O. DeNonno, J. Gonzalez, J. Klemm-Toole, and S. Tate, in ASME Pressure Vessels and Piping, Bellevue, 2024.
25. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Trans. A, 2020, vol. 51A, pp. 2626–50. https://doi.org/10.1007/s11661-020-05773-6.10.1007/s11661-020-05773-6 ↗
26. M. Sazerat, A. Nait-Ali, A. Cerellon, I. Lopez-Galilea, G. Burlot, S. Gillet, D. Eyidi, A. Joulain, P. Villechaise, S. Weber, R. Fortunier, and J. Cormier: J. Alloys Compd., 2023. https://doi.org/10.1016/j.jallcom.2023.171626.10.1016/j.jallcom.2023.171626 ↗
27. H. Zhang, Y. Wang, R. Rodriguez De Vecchis, and W. Xiong: J. Mater. Process. Technol., 2022. https://doi.org/10.1016/j.jmatprotec.2022.117597.10.1016/j.jmatprotec.2022.117597 ↗
28. A. Ramakrishnan and G. Dinda: Mater. Sci. Eng. A, 2019, vol. 748, pp. 347–56. https://doi.org/10.1016/j.msea.2019.01.101.10.1016/j.msea.2019.01.101 ↗
29. H. Matysiak, M. Zagorska, J. Andersson, A. Balkowiec, R. Cygan, M. Rasinski, M. Pisarek, M. Andrzejczuk, K. Kubiak, and K. Kurzydlowski: Materials, 2013, vol. 6, pp. 5016–037. https://doi.org/10.3390/ma6115016.10.3390/ma6115016 ↗
30. J. Gonzalez, Y. Zhang, A. Wessman, and J. Klemm-Toole, in Superalloy 718 & Derivatives, Pittsburgh, 2023.
31. L.M. Pike: in 7th International Symposium on Superalloy 718 and Derivatives, 2010.
32. L. Wang, K. Mao, P. Tortorelli, P. Maziasz, M. Thangirala, K. Unocic, and X. Chen: Mater. Sci. Eng. A, 2021. https://doi.org/10.1016/j.msea.2021.142099.10.1016/j.msea.2021.142099 ↗
33. B. Pint, H. Wang, C. Hawkins, and K. Unocic: Technical Qualification of New Materials for High Efficiency Coal-Fired Boilers and Other Advanced FE Concepts: Haynes 282 ASME Boiler and Pressure Vessel Code Case, Oak Ridge National Laboratory: Materials Science and Technology Division, Oak Ridge, 2020. https://doi.org/10.2172/1649169.10.2172/1649169 ↗
34. S. Singh, K. Kadoi, O. Ojo, B. Alexandrov, and J. Andersson: Mater. Des., 2023. https://doi.org/10.1016/j.matdes.2023.111853.10.1016/j.matdes.2023.111853 ↗
35. S. Singh and J. Andersson: Metals, 2020. https://doi.org/10.3390/met10010029.10.3390/met10010029 ↗
36. F. Hanning and J. Andersson: Weld. World, 2018, vol. 62, pp. 39–45. https://doi.org/10.1007/s40194-017-0508-z.10.1007/s40194-017-0508-z ↗
37. F. Nabarro and H. de Villiers: The Physics of Creep and Creep-Resistant Alloys, CRC Press, London, 1995.
38. B. Walser and O. Sherby: Scripta Mater., 1982, vol. 16, pp. 213–19. https://doi.org/10.1016/0036-9748(82)90389-1.10.1016/0036-9748(82)90389-1 ↗
39. L. Cui, J. Yu, J. Liu, T. Jin, and X. Sun: Mater. Sci. Eng. A, 2018, vol. 710, pp. 309–17. https://doi.org/10.1016/j.msea.2017.11.002.10.1016/j.msea.2017.11.002 ↗
40. X. Song, L. Tang, Z. Chen, and R. Zhou: J. Mater. Sci., 2016, vol. 52, pp. 4587–98. https://doi.org/10.1007/s10853-016-0703-0.10.1007/s10853-016-0703-0 ↗
41. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, Butterworth-Heinemann, 2015.10.1016/B978-0-08-099427-7.00001-3 ↗
42. P. Fernandez-Zelaia, O. Acevedo, M. Kirka, D. Leonard, S. Yoder, and Y. Lee: Metall. Trans. A, 2021, vol. 52A, pp. 574–90. https://doi.org/10.1007/s11661-020-06095-3.10.1007/s11661-020-06095-3 ↗
43. K. Kianinejad, R. Kamachali, A. Khedkar, A.M. Manzoni, L. Jacome, S. Schriever, R. Neumann, S. Megahed, C. Heinze, S. Kamrani, and B. Fedelich: Mater. Sci. Eng. A, 2024. https://doi.org/10.1016/j.msea.2024.146690.10.1016/j.msea.2024.146690 ↗
44. H. Riedel: Fracture at High Temperatures, Springer-Verlag, 1987.10.1007/978-3-642-82961-1 ↗
45. Y. Kim, J. Park, and Y. Ahn: Adv. Mater. Sci. Eng., 2018. https://doi.org/10.1155/2018/2048959.10.1155/2018/2048959 ↗
46. Y.P. Ding, X.J. Wu, X.Z. Zhang, and F. Khelfaoui: TSEP, 2023. https://doi.org/10.1016/j.tsep.2022.101603.10.1016/j.tsep.2022.101603 ↗
47. Z. Peng, J. Zou, J. Yang, G. Tian, and X. Wang: Prog. Nat. Sci. Mater., 2021, vol. 31, pp. 303–09. https://doi.org/10.1016/j.pnsc.2020.12.008.10.1016/j.pnsc.2020.12.008 ↗
48. L. Cui, H. Su, J. Yu, J. Liu, T. Jin, and X. Sun: Mater. Sci. Eng. A, 2017, vol. 707, pp. 383–91. https://doi.org/10.1016/j.msea.2017.09.066.10.1016/j.msea.2017.09.066 ↗
49. Z. Chu, J. Yu, X. Sun, H. Guan, and Z. Hu: Metall. Trans. A, 2009, vol. 40A, pp. 2927–37. https://doi.org/10.1007/s11661-009-0001-4.10.1007/s11661-009-0001-4 ↗
50. A. Srivastava, S. Gopagoni, A. Needleman, V. Seetharaman, A. Staroselsky, and R. Banerjee: Acta Mater., 2012, vol. 60, pp. 5697–711. https://doi.org/10.1016/j.actamat.2012.06.043.10.1016/j.actamat.2012.06.043 ↗
51. S. Tian, X. Ding, Z. Guo, J. Xie, Y. Xue, and D. Shu: Mater. Sci. Eng. A, 2014, vol. 594, pp. 7–16. https://doi.org/10.1016/j.msea.2013.11.049.10.1016/j.msea.2013.11.049 ↗