High-Throughput Quantification of Recrystallization Parameters for Alloy Development
Source abstract
Abstract
Abstract A high—throughput method to quantify the response to annealing after cold work was developed in cartridge brass. Traditionally, multiple samples are deformed to various levels of uniform strain, and individually heat treated and characterized. In this work, tensile samples with a sinusoidal edge profile were used to give macroscale strain gradients ranging from approx. 5 to 40 pct von Mises strain and 0 to 20 pct von Mises strain. The critical strain for full recrystallization was retrieved by means of EBSD. Hardness tests were able to accurately detect this threshold. Relationships for the time taken for completion and initiation of recrystallization were developed using the gradient samples. Such data could aid manufacturers in designing post-cold work heat treatments for novel alloys. The grain size upon the completion of recrystallization was calculated using the Hall–Petch relationship developed in this study, the results of which were very similar to the data in the literature. This demonstrates that the gradient sample method produces similar results to traditional methods. The grain size and hardness values at various levels of strain after a given heat treatment in the gradient samples were also equivalent to homogeneous samples. Furthermore, continuous grain size gradients were produced in the fully recrystallized region of each sample, meaning these samples could potentially be used in parallel, high-throughput tests of grain size-dependent properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. A.L. Beardsley, C.M. Bishop, and M.V. Kral: Mater. Perform. Charact., 2016, vol. 5, pp. 717–39.10.1520/MPC20160062 ↗
2. G.Y. Lai and A.B. Smith: in Report Number: GA-A-14770; CONF-780627-1, Research Org.: General Atomics, San Diego, CA (United States), 1977.
3. Incoloy alloy 800H & 800HT: Tech. Rep. SMC-047. Special Metals Corporation, New Hartford, NY 2004
4. F.J. Humphreys and M. Hatherly: in Recrystallization and Related Annealing Phenomena (Second Edition), F.J. Humphreys and M. Hatherly, eds., Elsevier, Oxford, 2004, pp. 215–66.10.1016/B978-008044164-1/50011-6 ↗
5. B. Hutchinson, S. Jonsson, and L. Ryde: Scr. Metall., 1989, vol. 23, pp. 671–76.10.1016/0036-9748(89)90510-3 ↗
6. D.R. Barraclough and C.M. Sellars: Met. Sci., 1979, vol. 13, pp. 257–68.10.1179/msc.1979.13.3-4.257 ↗
7. S.P. Chen, D.N. Hanlon, S. Van Der Zwaag, Y.T. Pei, and JTh.M. Dehosson: J. Mater. Sci., 2002, vol. 37, pp. 989–95.10.1023/A:1014356116058 ↗
8. B. Morales: Master of Science, Santa Clara University, 2019.
9. P.L.O. Rossi and C.M. Sellars: Acta Mater., 1997, vol. 45, pp. 137–48.10.1016/S1359-6454(96)00167-X ↗
10. H. Walker: Univ. Ill. Bull., 1945, vol. 43, pp. 7–55.
11. R.S. French: Trans. Am. Inst. Min. Metall. Pet. Eng., 1944, vol. 156, pp. 171–94.
12. A.E. Bousu, L.W. Eastwood, and C.T. Eddy: Trans. Am. Inst. Min. Metall. Pet. Eng., 1935, vol. 117, pp. 246–64.
13. P. Chotinuchit: Master of Science, University of Arizona, Arizona, 1962.
14. N. Breeuwer: Masters of Engineering in Mechanical Engineering, University of Canterbury, 2020.
15. C. Bishop, S. Mucalo, M. Kral, and D. Lewis: Metall. Mater. Trans. A, 2019, vol. 51A, pp. 1719–31.
16. D. Whitis: Proc. Int. Symp. Superalloys, 2004, pp. 391–400.10.7449/2004/Superalloys_2004_391_400 ↗
17. M.-A. Charpagne, J.-M. Franchet, and N. Bozzolo: Mater. Des., 2018, vol. 144, pp. 353–60.10.1016/j.matdes.2018.02.048 ↗
18. X. Wang, Z. Huang, B. Cai, N. Zhou, O. Magdysyuk, Y. Gao, S. Srivatsa, L. Tan, and L. Jiang: Acta Mater., 2019, vol. 168, pp. 287–98.10.1016/j.actamat.2019.02.012 ↗
19. The MathWorks Inc.: MATLAB version R2022a.
20. F. Bachmann, R. Hielscher, and H. Schaeben: Ultramicroscopy, 2011, vol. 111, pp. 1720–33.10.1016/j.ultramic.2011.08.002 ↗
21. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
22. A. Hadadzadeh, F. Mokdad, M.A. Wells, and D.L. Chen: Mater. Sci. Eng. A, 2018, vol. 709, pp. 285–89.10.1016/j.msea.2017.10.062 ↗
23. E28 Committee: ASTM E92-17: Standard Test Method for Vickers Hardness and Knoop Hardness of Metallic Materials: Tech. Rep. ASTM International, West Conshohocken, PA 2019.
24. M. Kulakov, J. Huang, M. Ntovas, and S. Moturu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 845–54.10.1007/s11661-019-05558-6 ↗
25. B. Aashranth, M. Arvinth Davinci, D. Samantaray, U. Borah, and S.K. Albert: Mater. Des., 2017, vol. 116, pp. 495–503.10.1016/j.matdes.2016.12.053 ↗
26. S. Mandal, S. Palla, and S.S. Vadlamani: Mater. Manuf. Process., 2010, vol. 25, pp. 54–59.10.1080/10426910903162985 ↗
27. S.M.S. Aghamiri, S. Ukai, N. Oono, R. Kasada, H. Noto, Y. Hishinuma, and T. Muroga: J. Alloys Compd., 2019, vol. 798, pp. 187–93.10.1016/j.jallcom.2019.05.248 ↗
28. N. Harshavardhana, S.P.S.S. Sivam, G. Kumar, and A.K. Saxena: Phys. Met. Metallogr., 2021, vol. 122, pp. 1279–87.10.1134/S0031918X20140094 ↗
29. D.P. Field, L.T. Bradford, M.M. Nowell, and T.M. Lillo: Acta Mater., 2007, vol. 55, pp. 4233–41.10.1016/j.actamat.2007.03.021 ↗
30. T. Konkova, S. Mironov, A. Korznikov, and S. Semiatin: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7432–43.10.1016/j.msea.2011.06.047 ↗
31. S. Abolghasem, S. Basu, and M.R. Shankar: J. Mater. Res., 2013, vol. 28, pp. 2056–69.10.1557/jmr.2013.201 ↗
32. M. Alvi, S. Cheong, H. Weiland, and A.D. Rollett: Mater. Sci. Forum, 2004, vol. 467, pp. 357–62.10.4028/www.scientific.net/MSF.467-470.357 ↗
33. X.X. Wang, M. Zhan, P.F. Gao, P.Y. Ma, K. Yang, Y.D. Lei, and Z.X. Li: Mater. Sci. Eng. A, 2020, vol. 772, p. 138804.10.1016/j.msea.2019.138804 ↗
34. R.A. Vandermeer and D.J. Jensen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2227–35.10.1007/BF02671238 ↗
35. A.D. Rollett: Prog. Mater. Sci., 1997, vol. 42, pp. 79–99.10.1016/S0079-6425(97)00008-X ↗
36. J.T. Michalak and W.R.J. Hibbard: J. Met., 1957, vol. 209, pp. 101–06.
37. G.J. Liao, R. Le Gall, and G. Saindrenan: Mater. Sci. Technol., 1998, vol. 14, p. 411.10.1179/mst.1998.14.5.411 ↗
38. X. Song, M. Rettenmayr, C. Müller, and H.E. Exner: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2199–2206.10.1007/s11661-001-0195-6 ↗
39. H. Luo and S. van der Zwaag: Metall Mater. Trans., 2016, vol. 47, pp. 231–38.10.1007/s11661-015-3200-1 ↗
40. B. Wilshire and M.T. Whittaker: Acta Mater., 2009, vol. 57, pp. 4115–24.10.1016/j.actamat.2009.05.009 ↗
41. M. Mlikota, K. Dogahe, S. Schmauder, and Ž Božić: Int. J. Fatigue, 2022, vol. 158, p. 106562.10.1016/j.ijfatigue.2021.106562 ↗
42. K. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, pp. 075005-075005–075013.10.5006/1.3462912 ↗
43. A. Ayad, M. Ramoul, A.D. Rollett, and F. Wagner: Mater Charact, 2021, vol. 171, p. 110773.10.1016/j.matchar.2020.110773 ↗
44. Y. Cao, H. Di, J. Zhang, J. Zhang, T. Ma, and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol. 585, pp. 71–85.10.1016/j.msea.2013.07.037 ↗
45. R. Petrov, L. Kestens, A. Wasilkowska, and Y. Houbaert: Mater. Sci. Eng. A, 2007, vol. 447, pp. 285–97.10.1016/j.msea.2006.10.023 ↗
46. M.K. Alam, M. Mehdi, R.J. Urbanic, and A. Edrisy: Mater. Charact., 2020, vol. 161, 110138.10.1016/j.matchar.2020.110138 ↗
47. E04 Committee: ASTM E2627 - 13: Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials: Tech. Rep. ASTM International, West Conshohocken, PA 2019.
48. X. Yang, Y. Okabe, H. Miura, and T. Sakai: Sustain. Mater. Des. Appl., 2012, vol. 36, pp. 626–32.10.4028/www.scientific.net/AMM.170-173.626 ↗
49. P.N. Kalu and D.R. Waryoba: Mater. Sci. Eng. A, 2007, vol. 464, pp. 68–75.10.1016/j.msea.2007.01.124 ↗
50. S.A. Saltykov: Steremetricheskaya Metallograpfiya (Stereometric Metallography), 2nd revised and supplemented edition., Metallurgizdat, Moscow, 1958.
51. E04 Committee: ASTM E112–24: Standard Test Methods for Determining Average Grain Size: Tech. Rep. ASTM International, West Conshohocken, PA 2024.
52. E E28 Committee: ASTM E8/E8M–24: Standard Test Methods for Tension Testing of Metallic Materials: Tech. Rep. ASTM International, West Conshohocken, PA 2024.
53. J. Lee, F. Ehrlich, L. Crall, and T. Collins: Metall. Trans. A, 1988, vol. 19, pp. 329–35.10.1007/BF02652542 ↗