Metastable Microstructural States During Short-Term Heat Treatment of the High-Speed Steel PM HS 3-3-4: Modeling and Experimental Validation
Source abstract
Abstract
Abstract Short-term heat treatments of tool steels, such as inductive hardening, target the martensitic hardening of functional surfaces from a metastable microstructural state of the multiphase system. Understanding the kinetics of the carbide dissolution, precipitation, growth, and coarsening, and their effect on the austenitic matrix is, thus, instrumental to designing optimal heat treatments. The present work investigates the influence of such processes on the powder-metallurgically produced high-speed steel DIN EN 1.3377 (PM HS 3-3-4). Starting from the as-delivered soft-annealed state, the microstructural evolution during the heat treatment was investigated. The heat treatments were simulated experimentally in a quenching dilatometer and numerically within the software package MatCalc. SEM and XRD provided detailed information about the microstructure, whereas hardness measurements deliver insights into mechanical properties. The developed MatCalc model can predict the carbide dissolution and the associated change in the chemical composition of the matrix during austenitizing as a function of temperature and time. The results in terms of the measured and computed martensite start temperature demonstrated good agreement between the experimental and simulation campaigns.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. R. Abbaschian: Physical Metallurgy Principles (KE-QTN/0036/08), 4th ed. Cengage, Boston, 2008.
2. H. Berns and W. Theisen: Eisenwerkstoffe - Stahl und Gusseisen, 4th ed. Springer, Berlin, 2008.
3. T. Gladman: Mater. Sci. Technol., 1999, vol. 15(1), pp. 30–36. https://doi.org/10.1179/026708399773002782.10.1179/026708399773002782 ↗
4. D.L. McDowell, et al.: Integrated Design of Multiscale, Multifunctional Materials and Products, Elsevier, Butterworth-Heinemann, Amsterdam, Oxford, 2010.
5. I. Chang and Y. Zhao: Advances in Powder Metallurgy: Properties, Processing and Applications: Woodhead Publishing Series in Metals and Surface Engineering, vol. 60, Woodhead Publishing, Oxford, 2013.
6. S. Benito, J. Boes, M. Matsuo, S. Weber, and W. Theisen: Mater. Des., 2021, vol. 208, p. 109925. https://doi.org/10.1016/j.matdes.2021.109925.10.1016/j.matdes.2021.109925 ↗
7. W. Schatt, K.-P. Wieters, and B. Kieback: Hg. Pulvermetallurgie: Technologien und Werkstoffe, 2. Aufl. (VDI-Buch), Springer, Berlin, 2006. http://nbn-resolving.org/urn:nbn:de:bsz:31-epflicht-1540663.10.1007/978-3-540-68112-0 ↗
8. A.S. Chaus and M. Sahul: Mater. Lett., 2019, vol. 256, p. 126605. https://doi.org/10.1016/j.matlet.2019.126605.10.1016/j.matlet.2019.126605 ↗
9. E. Hornbogen, H. Warlimont, and B. Skrotzki: Metalle: Struktur und Eigenschaften der Metalle und Legierungen, 7. Aufl (SpringerLink Bücher), Springer, Berlin, 2019.10.1007/978-3-662-57763-9 ↗
10. F. Su, H. Wang, and Z. Wen: J. Mater. Res. Technol., 2021, vol. 11, pp. 992–99. https://doi.org/10.1016/j.jmrt.2021.01.074.10.1016/j.jmrt.2021.01.074 ↗
11. J. Schuppener, S. Müller, S. Benito, and S. Weber: Steel Res. Int., 2023, vol. 94(4), p. 2200452. https://doi.org/10.1002/srin.202200452.10.1002/srin.202200452 ↗
12. N. Schmidtseifer and S. Weber: Metall. Mater. Trans. A, 2021, vol. 52A(7), pp. 2885–95. https://doi.org/10.1007/s11661-021-06280-y.10.1007/s11661-021-06280-y ↗
13. J.-H. Kang and P. Rivera-Díaz-del-Castillo: Comput. Mater. Sci., 2013, vol. 67, pp. 364–72. https://doi.org/10.1016/j.commatsci.2012.09.022.10.1016/j.commatsci.2012.09.022 ↗
14. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2(9), pp. 2343–57. https://doi.org/10.1007/BF02814873.10.1007/BF02814873 ↗
15. S. Benito, N. Wulbieter, F. Pöhl, and W. Theisen: J. Mater. Eng. Perform., 2019, vol. 28(5), pp. 2919–36. https://doi.org/10.1007/s11665-019-04036-9.10.1007/s11665-019-04036-9 ↗
16. L. Lutterotti, S. Matthies, and H.-R. Wenk: CPD Newsl., 1999, pp. 14–15.
17. MatCalc Engineering GmbH: General Information, MatCalc Engineering GmbH. https://www.matcalc-engineering.com/index.php/matcalc-software/general-information.
18. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A, 2004, vol. 385(1–2), pp. 166–74. https://doi.org/10.1016/j.msea.2004.06.018.10.1016/j.msea.2004.06.018 ↗
19. E. Kozeschnik, J. Svoboda, P. Fratzl, and F.D. Fischer: Mater. Sci. Eng. A, 2004, vol. 385(1–2), pp. 157–65. https://doi.org/10.1016/j.msea.2004.06.016.10.1016/j.msea.2004.06.016 ↗
20. P. Warczok, M. Rath, and A. Falahati: BHM Berg- und Hüttenmänn. Mon., 2019, vol. 164(9), pp. 398–403.10.1007/s00501-019-00895-w ↗
21. H.L. Lukas, S.G. Fries, and B. Sundman: Computational thermodynamics: The CALPHAD Method. Cambridge University Press, Cambridge, 2007. http://www.loc.gov/catdir/enhancements/fy0805/2007282018-b.html.10.1017/CBO9780511804137 ↗
22. D. Barbier: Adv. Eng. Mater., 2014, vol. 16(1), pp. 122–27. https://doi.org/10.1002/adem.201300116.10.1002/adem.201300116 ↗
23. D. Zhang, Z. Li, L. Xie, Y. Xiao, and F. Yin: Int. J. Mater. Res., 2015, vol. 106(8), pp. 870–76. https://doi.org/10.3139/146.111239.10.3139/146.111239 ↗
24. A.S. Chaus: Phys. Met. Metallogr., 2016, vol. 117(7), pp. 684–92. https://doi.org/10.1134/S0031918X16070048.10.1134/S0031918X16070048 ↗
25. A.S. Chaus, M. Beznák, R. Šuba, and M. Bajčičák: DDF, 2014, vol. 353, pp. 61–66. https://doi.org/10.4028/www.scientific.net/DDF.353.61.10.4028/www.scientific.net/DDF.353.61 ↗
26. G. Gottstein: Materialwissenschaft und Werkstofftechnik: Physikalische Grundlagen, 4. Aufl. (Springer-Lehrbuch), Springer, Berlin, 2014.10.1007/978-3-642-36603-1 ↗
27. Y. Luo, H. Guo, X. Sun, M. Mao, and J. Guo: Metals, 2017, vol. 7(1), p. 27. https://doi.org/10.3390/met7010027.10.3390/met7010027 ↗
28. M. Qian: Scripta Mater., 1999, vol. 41(12), pp. 1301–03. https://doi.org/10.1016/S1359-6462(99)00305-X.10.1016/S1359-6462(99)00305-X ↗
29. W. Liu, X. Wang, F. Guo, and C. Shang: Materials (Basel Switz.), 2022. https://doi.org/10.3390/ma15248742.10.3390/ma15248742 ↗
30. MatCalc: MatCalc User Manual, MatCalc. https://www.matcalc-engineering.com/files/MC_User_Manual_2019.pdf.
31. C. Capdevila, F.G. Caballero, and C. García De Andrés: Mater. Sci. Technol., 2003, vol. 19(5), pp. 581–86. https://doi.org/10.1179/026708303225001902.10.1179/026708303225001902 ↗
32. M.J. Whelan: Met. Sci. J., 2013, vol. 3(1), pp. 95–97. https://doi.org/10.1179/msc.1969.3.1.95.10.1179/msc.1969.3.1.95 ↗
33. X. Qiao, L. Han, W. Zhang, and J. Gu: ISIJ Int., 2016, vol. 56(1), pp. 140–47. https://doi.org/10.2355/isijinternational.ISIJINT-2015-248.10.2355/isijinternational.ISIJINT-2015-248 ↗
34. J. Damon, S. Dietrich, and V. Schulze: J. Mater. Res. Technol., 2020, vol. 9(4), pp. 8245–57. https://doi.org/10.1016/j.jmrt.2020.05.035.10.1016/j.jmrt.2020.05.035 ↗
35. J. Schuppener, S. Benito, and S. Weber: J. Mater. Eng. Perform., 2024. https://doi.org/10.1007/s11665-024-09548-7.10.1007/s11665-024-09548-7 ↗
36. J. Schuppener, S. Benito, and S. Weber: Discov. Appl. Sci., 2024. https://doi.org/10.1007/s42452-024-06184-7.10.1007/s42452-024-06184-7 ↗