journal article·2025-01

Solute Drag Creep in Niobium Alloy C103 (Nb-10Hf-1Ti) at 1550 to 1750 °C

Thomas J. Bennett, Eric M. Taleff

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. R.T. Torgerson: Space/Aeronaut., 1963, vol. 40(1), pp. 99–103.
2. J. Wadsworth, C.A. Roberts, and E.H. Rennhack: J. Mater. Sci., 1982, vol. 17(9), pp. 2539–46.10.1007/BF00543885 ↗
3. J. Wadsworth, S.E. Dougherty, P.A. Kramer, and T.G. Nieh: Scr. Metall. Mater., 1992, vol. 27(1), pp. 71–76.10.1016/0956-716X(92)90322-6 ↗
4. O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 325–90.10.1016/0079-6425(68)90024-8 ↗
5. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: In D.G. Brandon and A. Rosen, eds., International Conference on Quantitative Relation Between Properties and Microstructure, Israel Universities Press, Haifa, Israel, 1969, pp. 255–342.
6. W.R. Cannon and O.D. Sherby: Metall. Trans. A, 1970, vol. 1, pp. 1030–32.10.1007/BF02811789 ↗
7. F.A. Mohamed and T.G. Langdon: Acta Metall., 1974, vol. 22(6), pp. 779–88.10.1016/0001-6160(74)90088-1 ↗
8. P. Yavari, F.A. Mohamed, and T.G. Langdon: Acta Metall., 1981, vol. 29(8), pp. 1495–1507.10.1016/0001-6160(81)90184-X ↗
9. J. Weertman: J. Appl. Phys., 1957, vol. 28(10), pp. 1185–89.10.1063/1.1722604 ↗
10. J. Weertman: Trans. Metall. Soc. AIME, 1960, vol. 218, pp. 207–18.
11. S. Takeuchi and A. Argon: Acta Metall., 1976, vol. 24(10), pp. 883–89.10.1016/0001-6160(76)90036-5 ↗
12. M.J. Mills, J.C. Gibeling, and W.D. Nix: Acta Metall., 1985, vol. 33(8), pp. 1503–14.10.1016/0001-6160(85)90051-3 ↗
13. M.J. Mills, J.C. Gibeling, and W.D. Nix: Acta Metall., 1986, vol. 34(5), pp. 915–25.10.1016/0001-6160(86)90065-9 ↗
14. T.J. Bennett, IV and E.M. Taleff: Microsc. Microanal., 2024. https://doi.org/10.1093/mam/ozae092.10.1093/mam/ozae092 ↗
15. ASTM International: Standard Designation B654/B654M–10R18, ASTM International, West Conshohocken, PA, 2018.
16. P.E. Armstrong and H.L. Brown: ASM Trans. Q., 1965, vol. 58(1), pp. 30–37.
17. P.E. Armstrong, J.M. Dickinson, and H.L. Brown: Trans. Metall. Soc. AIME, 1966, vol. 236(10), pp. 1404–08.
18. E.A.D. Brady and E.M. Taleff: Metall. Mater. Trans. A, 2021, vol. 52A(3), pp. 1095–1105.10.1007/s11661-020-06126-z ↗
19. E.A.D. Brady: PhD thesis, The University of Texas at Austin, 2021.
20. P.J. Noell: PhD thesis, The University of Texas at Austin, 2015.
21. G.E. Dieter: Mechanical Metallurgy. McGraw-Hill, 1986.
22. M.A. Burke and W.D. Nix: Acta Metall., 1975, vol. 23, pp. 793–98.10.1016/0001-6160(75)90195-9 ↗
23. J.W. Hutchinson and H. Obrecht: Fracture, 1977, vol. 1, pp. 101–16.
24. ASTM International: Standard Designation ASTM E112–13, ASTM International, West Conshohocken, PA, 2013.
25. S.A. Saltykov: Steremetricheskaya Metallograpfiya (Stereometric Metallurgy). Metallurgizdat, Moscow, 2nd ed., 1958.
26. E.A.D. Brady and E.M. Taleff: Metall. Mater. Trans. A, 2022, vol. 53(10), pp. 3057–72.10.1007/s11661-022-06726-x ↗
27. O.D. Sherby: Acta Metall., 1962, vol. 10(2), pp. 135–47.10.1016/0001-6160(62)90058-5 ↗
28. C.R. Barrett, A.J. Ardell, and O.D. Sherby: Trans. Metall. Soc. AIME, 1964, vol. 230, pp. 200–204.
29. F.F. Schmidt and H.R. Ogden: Technical Report DMIC Report 188 (AD 426255), Defense Metals Information Center, Battelle Memorial Institute, Columbus, Ohio, 1963.
30. C.C. Wojcik: MRS Online Proc. Libr., 1993, vol. 322, pp. 519–30.10.1557/PROC-322-519 ↗
31. T.S. Lundy, F.R. Winslow, R.E. Pawel, and C.J. McHargue: Trans. Metall. Soc. AIME, 1965, vol. 233(8), pp. 1533–9.
32. R.E. Einziger, J.N. Mundy, and H.A. Hoff: Phys. Rev. B, 1978, vol. 17(2), pp. 440–8.10.1103/PhysRevB.17.440 ↗
33. W.F. Gale and T.C. Totemeier, eds.: Smithells Metals Reference Book, 8th ed. Elsevier, Butterworth-Heinemann, Burlington, MA, 2004.
34. E.M. Taleff, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1996, vol. 27A(2), pp. 343–52.10.1007/BF02648411 ↗
35. E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A(3A), pp. 1081–91.
36. G.A. Henshall, M.E. Kassner, and H.J. McQueen: Metall. Trans. A, 1992, vol. 23A, pp. 881–9.10.1007/BF02675565 ↗
37. E.M. Taleff, P.J. Nevland, and S.J. Yoon: In E.M. Taleff, C.K. Syn, and D.R. Lesuer, eds., Deformation, Processing, and Properties of Structural Materials, TMS, Warrendale, PA, 2000, pp. 373–84.
38. E.M. Taleff, P.J. Nevland, and P.E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A(5), pp. 1119–30.10.1007/s11661-001-0123-9 ↗
39. E.M. Taleff: Key Eng. Mater., 2010, vol. 433, pp. 259–65.10.4028/www.scientific.net/KEM.433.259 ↗
40. E.M. Taleff, W.P. Green, M.-A. Kulas, T.R. McNelley, and P.E. Krajewski: Mater. Sci. Eng., A, 2005, vol. 36(5), pp. 1249–61.10.1007/s11661-005-0217-x ↗
41. J.-K. Chang, K. Takata, K. Ichitani, and E.M. Taleff: Mater. Sci. Eng., A, 2010, vol. 527, pp. 3822–8.10.1016/j.msea.2010.02.042 ↗
42. A.J. Carpenter, A.R. Antoniswamy, J.T. Carter, L.G. Hector, Jr., and E.M. Taleff: Acta Mater., 2014, vol. 68, pp. 254–66.10.1016/j.actamat.2014.01.043 ↗
43. J.M. Rosenberg and H.R. Piehler: Metall. Trans., 1971, vol. 2(1), pp. 257–9.10.1007/BF02662666 ↗
44. R.H. Titran and W.D. Klopp: NASA Technical Paper 1727, NASA Lewis Research Center, Cleveland, OH, 1980.
45. S. Karashima, T. Iikubo, and H. Oikawa: Trans. Jpn. Inst. Met., 1972, vol. 13(3), pp. 176–81.10.2320/matertrans1960.13.176 ↗
46. C. Young and O. Sherby: 1973, J. Iron and Steel Inst. London, 211(9), pp. 640–47.
47. S. Robinson, C. Young, and O. Sherby: J. Mater. Sci., 1974, vol. 9(2), pp. 341–43.10.1007/BF00550963 ↗
48. O.D. Sherby, R.H. Klundt, and A.K. Miller: Metall. Trans. A, 1977, vol. 8A(6), pp. 843–50.10.1007/BF02661565 ↗
49. M. Kassner and M. McMahon: Metall. Trans. A, 1987, vol. 18(5), pp. 835–46.10.1007/BF02646925 ↗
50. T.J. Bennett, IV and E.M. Taleff: Metall. Mater. Trans. A, 2024, vol. 55(2), pp. 429–46.10.1007/s11661-023-07256-w ↗
51. ASTM International: Standard Designation ASTM B393–18, ASTM International, West Conshohocken, PA, 2018.
52. F. Roux and A. Vignes: Rev. Phys. Appl., 1970, vol. 5(3), pp. 393–405.10.1051/rphysap:0197000503039300 ↗
53. N. Zou, H.J. Lu, and X.G. Lu: J. Alloys Compd., 2019, vol. 803, pp. 684–8.10.1016/j.jallcom.2019.06.293 ↗
54. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. A, 1949, vol. 199A(1056), pp. 104–14.10.1098/rspa.1949.0128 ↗
55. H.W. King: J. Mater. Sci., 1966, vol. 1, pp. 79–90.10.1007/BF00549722 ↗
56. R.W. Buckman: In J.L. Walter, M.R. Jackson, and C.T. Sims, eds., Alloying, ASM International, 1988, pp. 419–45.
57. R.H. Titran, and R.W. Hall:NASA Technical Note D-3222, NASA Lewis Research Center, Cleveland, OH, 1966.
58. H.E. McCoy: J. Less-Common Met., 1965, vol. 8(1), pp. 20–35.10.1016/0022-5088(65)90054-8 ↗
59. H.E. McCoy: ASM Trans. Q., 1966, vol. 59(2), pp. 277–87.
60. D. Hull and D.J. Bacon: Introduction to Dislocations. Elsevier/Butterworth-Hienemann, Burlington, MA, 5th ed., 2011.
61. M.A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, and T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A(5), pp. 1249–61.10.1007/s11661-005-0217-x ↗
62. G.I. Taylor: Proc. R. Soc. London Ser. A, 1934, vol. 145(855), pp. 362–87.10.1098/rspa.1934.0106 ↗
63. C. Zener and J.H. Hollomon: J. Appl. Phys., 1944, vol. 15(1), pp. 22–32.10.1063/1.1707363 ↗
64. M.J. Klein and A.G. Metcalfe: Metall. Trans., 1973, vol. 4(10), pp. 2441–48.10.1007/BF02669388 ↗
65. R.A. Perkins and E.S. Wright: J. Test. Eval., 1974, vol. 2(5), pp. 337–43.10.1520/JTE10116J ↗
66. C. Himmelblau, M. Kibrick, J. Runkle, A. Joshi, J. Wadsworth, and J. Moncur: Prog. Powder Metall., 1984, vol. 39, pp. 525–42.
67. R.L. Fullman, R.P. Carreker, and J.C. Fisher: Trans. AIME, 1953, vol. 197, pp. 657–59.
68. M.K. Kumawat, M.Z. Alam, A. Kumar, K. Gopinath, S. Saha, V. Singh, V. Srinivas, and D.K. Das: Surf. Coat. Technol., 2018, vol. 349, pp. 695–706.10.1016/j.surfcoat.2018.06.046 ↗
69. N.R. Philips, M. Carl, and N.J. Cunningham: Metall. Mater. Trans. A, 2020, vol. 51A(7), pp. 3299–3310.10.1007/s11661-020-05803-3 ↗
70. O. Mireles, O. Rodriguez, Y. Gao, and N. Philips: in AIAA Propulsion and Energy 2020 Forum, AIAA, 2020, pp. 1–13.
71. P.D. Awasthi, P. Agrawal, R.S. Haridas, R.S. Mishra, M.T. Stawovy, S. Ohm, and A. Imandoust: Mater. Sci. Eng. A, 2022, vol. 831, pp. 142183.10.1016/j.msea.2021.142183 ↗
72. B.J. Colón, K.I. Watanabe, T.J. Hobbs, C.J. Romnes, O.R. Mireles, L.E. Murr, and F. Medina: J. Mater. Res. Technol., 2024, vol. 30, pp. 5028–39.10.1016/j.jmrt.2024.04.200 ↗
73. K.M. Mullin, C. Frey, J. Lamb, S.K. Wu, M.P. Echlin, and T.M. Pollock: Mater. Des., 2024, vol. 238, pp. 112726.10.1016/j.matdes.2024.112726 ↗
74. N. Philips, C. Rock, N. Cunningham, J. Cooper, and T. Horn: Metall. Mater. Trans. A, 2024, vol. 55(7), pp. 2472–84.10.1007/s11661-024-07411-x ↗