Strain Hardening in Dilute Binary Al–Cu, Al–Zn, and Al–Mn Alloys: Experiment and Modeling
Source abstract
Abstract
Abstract During thermo-mechanical processing, dissolved alloying elements have a huge impact on the microstructure evolution by influencing the overall dislocation storage rate. Especially, for non-heat treatable Al alloys, the effects of strain-hardening and solid solution strengthening are of significant practical interest. In the present work, a detailed study of the room temperature work-hardening behavior of binary Al–Cu, Al–Zn, and Al–Mn alloys with varying solute concentrations is carried out. Stress–strain curves at different strain rates are recorded and computationally analyzed by an advanced 3-Internal-Variables-Model (3IVM) approach for the dislocation density evolution. The initial strengthening rate is examined as a function of the solute concentration.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. R.A. Labusch: Phys. Status Solidi, 1970, vol. 41, pp. 659–69.10.1002/pssb.19700410221 ↗
2. G.P.M. Leyson, W.A. Curtin, L.G. Hector, and C.F. Woodward: Nat. Mater., 2010, vol. 9, pp. 750–55.10.1038/nmat2813 ↗
3. G.P.M. Leyson, L.G. Hector, and W.A. Curtin: Acta Mater., 2012, vol. 60, pp. 3873–84.10.1016/j.actamat.2012.03.037 ↗
4. G.P.M. Leyson and W.A. Curtin: Scripta Mater., 2016, vol. 111, pp. 85–88.10.1016/j.scriptamat.2015.08.020 ↗
5. A. Deschamps, Y. Bréchet, C.J. Necker, S. Saimoto, and J.D. Embury: Mater. Sci. Eng. A, 1996, vol. 207, pp. 143–52.10.1016/0921-5093(95)09992-1 ↗
6. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. Lond., 1949, vol. 199, pp. 104–44.
7. R.L. Fleischer: Acta Metall., 1949, vol. 11, pp. 203–09.10.1016/0001-6160(63)90213-X ↗
8. H. Suzuki: J. Phys. Soc. Jpn., 1962, vol. 17, pp. 322–25.10.1143/JPSJ.17.322 ↗
9. P. Haasen: in Physical Metallurgy III. R.W. Cahn and P. Haasen, eds., North-Holland, Amsterdam, 1996, pp. 2009–73.10.1016/B978-044489875-3/50028-4 ↗
10. N.F. Mott and F.R.N. Nabarro: Physical Society Bristol Conference Report, 1948.
11. J. Friedel: Les Dislocations, Gauthier-Villars, Paris, 1956.
12. G.P.M. Leyson and W.A. Curtin: Philos. Mag., 2013, vol. 93, pp. 2428–44.10.1080/14786435.2013.776718 ↗
13. M. Jobba, R.K. Mishra, and M. Niewczas: Int. J. Plast., 2015, vol. 65, pp. 43–60.10.1016/j.ijplas.2014.08.006 ↗
14. A. Kula, X. Jia, R.K. Mishra, and M. Niewczas: Int. J. Plast., 2022, vol. 155, p. 103321.10.1016/j.ijplas.2022.103321 ↗
15. A. Hunter and D.L. Preston: Int. J. Plast., 2022, vol. 151, p. 103178.10.1016/j.ijplas.2021.103178 ↗
16. J. C. Teixeira, Y. Bréchet, Y. Estrin, and C. Hutchinson: Proc. 12th Int. Conf. Alum. Alloy, 2010, pp. 536–41.
17. N. Grilli, K.G.F. Janssens, J. Nellessen, S. Sandlöbes, and D. Raabe: Int. J. Plast., 2018, vol. 100, pp. 104–21.10.1016/j.ijplas.2017.09.015 ↗
18. E. Bitzek, C. Brandl, P.M. Derlet, and H. Van Swygenhoven: Phys. Rev. Lett., 2008, vol. 100, pp. 1–4.10.1103/PhysRevLett.100.235501 ↗
19. U. Messerschmidt and M. Bartsch: Mater. Chem. Phys., 2003, vol. 81, pp. 518–23.10.1016/S0254-0584(03)00064-6 ↗
20. F. Roters, D. Raabe, and G. Gottstein: Acta Mater., 2000, vol. 48, pp. 4181–89.10.1016/S1359-6454(00)00289-5 ↗
21. M. Goerdeler: Application of a Dislocation Density Based Flow Stress Model in the Integrative Through-Process Modelling of Aluminium Production, Shaker Verlag, Maastricht, 2007.
22. P. Ludwik: Phys. Z., 1909, vol. 12, pp. 411–17.
23. E. Voce: Metallurgia, 1955, vol. 51, pp. 219–26.
24. G. R. Johnson and W. H. Cook: Proc. Seventh Int. Symp. Ballist., 1983, pp. 541–47.
25. F.J. Zerilli and R.W. Armstrong: J. Appl. Phys., 1987, vol. 61, pp. 1816–25.10.1063/1.338024 ↗
26. S. Huang, A.S. Khan, S. Huang, and A.S. Khan: Int. J. Plast., 1992, vol. 8, pp. 501–17.10.1016/0749-6419(92)90028-B ↗
27. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76–85.10.1115/1.3443340 ↗
28. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
29. Y. Estrin: J. Mater. Process. Technol., 1998, vol. 80, pp. 33–39.10.1016/S0924-0136(98)00208-8 ↗
30. E. Nes: Prog. Mater. Sci., 1997, vol. 41, pp. 129–93.10.1016/S0079-6425(97)00032-7 ↗
31. F. Barlat, M.V. Glazov, J.C. Brem, and D.J. Lege: Int. J. Plast., 2002, vol. 18, pp. 919–39.10.1016/S0749-6419(01)00015-8 ↗
32. L.S. Tóth, A. Molinari, and Y. Estrin: J. Eng. Mater. Technol. Trans. ASME, 2002, vol. 124, pp. 71–77.10.1115/1.1421350 ↗
33. R.A. Austin and D.L. Mcdowell: Int. J. Plast., 2011, vol. 27, pp. 1–24.10.1016/j.ijplas.2010.03.002 ↗
34. X.G. Fan and H. Yang: Int. J. Plast., 2011, vol. 27, pp. 1833–52.10.1016/j.ijplas.2011.05.008 ↗
35. C.Y. Gao and L.C. Zhang: Int. J. Plast., 2012, vol. 32–33, pp. 121–33.10.1016/j.ijplas.2011.12.001 ↗
36. E.I. Galindo-Nava, J. Sietsma, and P.E.J. Rivera-Díaz-Del-Castillo: Acta Mater., 2012, vol. 60, pp. 2615–24.10.1016/j.actamat.2012.01.028 ↗
37. J. Kreyca and E. Kozeschnik: Int. J. Plast., 2018, vol. 103, pp. 67–80.10.1016/j.ijplas.2018.01.001 ↗
38. W.A. Curtin, D.L. Olmsted, and L.G. Hector: Nat. Mater., 2006, vol. 5, pp. 875–80.10.1038/nmat1765 ↗
39. P. Haasen: Physical Metallurgy, Springer, Berlin, 1996, pp. 2010–73.10.1017/CBO9781107295551 ↗
40. P. Sherstnev, P. Lang, and E. Kozeschnik: ECCOMAS 2012—Eur. Congr. Comput. Methods Appl. Sci. Eng. E-B, 2012, pp. 5331–38.
41. N. Hansen and X. Huang: Acta Mater., 1998, vol. 46, pp. 1827–36.10.1016/S1359-6454(97)00365-0 ↗
42. U. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
43. F.F. Lavrentev: Mater. Sci. Eng., 1980, vol. 46, pp. 191–208.10.1016/0025-5416(80)90175-5 ↗
44. M. Sauzay and L.P. Kubin: Prog. Mater. Sci., 2011, vol. 56, pp. 725–84.10.1016/j.pmatsci.2011.01.006 ↗
45. H. Mughrabi: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 411–20.10.1016/j.cossms.2016.07.001 ↗
46. D.R. Steinmetz, T. Jäpel, B. Wietbrock, P. Eisenlohr, I. Gutierrez-Urrutia, A. Saeed-Akbari, T. Hickel, F. Roters, and D. Raabe: Acta Mater., 2013, vol. 61, pp. 494–510.10.1016/j.actamat.2012.09.064 ↗
47. Y. Wang, H. Zhao, X. Chen, B. Gault, Y. Brechet, and C. Hutchinson: Acta Mater., 2024, vol. 265, p. 119643.10.1016/j.actamat.2023.119643 ↗
48. A. Sadeghi and E. Kozeschnik: Metall. Mater. Trans. A, 2024, vol. 55A, pp. 1643–53.10.1007/s11661-024-07358-z ↗
49. F.D. Fischer, J. Svoboda, F. Appel, and E. Kozeschnik: Acta Mater., 2011, vol. 59, pp. 3463–72.10.1016/j.actamat.2011.02.020 ↗
50. R. Radis and E. Kozeschnik: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 1–15.10.1088/0965-0393/20/5/055010 ↗
51. F.D. Fischer, J. Svoboda, and E. Kozeschnik: Model. Simul. Mater. Sci. Eng., 2013, vol. 21, pp. 1–13.10.1088/0965-0393/21/2/025008 ↗
52. J. Kratochvil and S. Libovicky: Scripta Metall., 1986, vol. 20(11), pp. 1625–30.10.1016/0036-9748(86)90408-4 ↗
53. W.B. Zhou, G.B. Teng, C.Y. Liu, H.Q. Qi, H.F. Huang, Y. Chen, and H.J. Jiang: J. Mater. Eng. Perform., 2017, vol. 26, pp. 3977–82.10.1007/s11665-017-2852-y ↗
54. M. Somerday and F.J. Humphreys: Mater. Sci. Technol., 2003, vol. 19, pp. 20–29.10.1179/026708303225008590 ↗
55. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
56. J.P. Hirth and J. Lothe: Theory of Dislocations, Krieger Publishing Company, Malabar, 1991.
57. U.F. Kocks: Metall. Mater. Trans., 1970, vol. 1, pp. 1121–43.10.1007/BF02900224 ↗
58. J. Gubicza, N.Q. Chinh, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 55–59.10.1016/j.msea.2004.03.076 ↗