journal article·2024-10Open access

Formation and Physical Properties of (NbTa)$$67$$(HfZr)$$33$$ Medium-Entropy Alloy and (NbTa)$$67$$(HfZrTi)$$33$$ High-Entropy Alloy Prepared by Mechanical Alloying

Rafał Idczak, Piotr Sobota, Daniel Gnida, Sławomir Kołodziej, Beata Chrząszcz, Mathieu Pasturel, Adam Pikul

Abstract

Abstract The medium-entropy alloy (NbTa)$$0.67$$(HfZr)$$0.33$$ and the high-entropy alloy (NbTa)$$0.67$$(HfZrTi)$$0.33$$ were prepared by mechanical alloying using high-energy planetary ball mill. The results of X-ray diffraction, scanning electron microscopy, and positron annihilation lifetime spectroscopy measurements suggest that both as-prepared powders are multicomponent alloys in amorphous (or highly disordered) state. The magnetic and thermodynamic results obtained for these powders undoubtedly prove that bulk superconductivity is not observed at temperatures exceeding 2 K. Thermal treatment of both studied materials leads to decomposition of the amorphous phase and precipitation of several crystalline phases. In both annealed samples, the structure of the main crystalline phase was identified as body-centered cubic (bcc), and in this phase, bulk superconductivity was observed below 6.5 K.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. J.-W. Yeh, S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T.-T. Shun, C.-H. Tsau, and S.-Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303. https://doi.org/10.1002/adem.200300567.10.1002/adem.200300567 ↗
2. B. Cantor: Prog. Mater. Sci., 2021, vol. 120, p. 100754. https://doi.org/10.1016/j.pmatsci.2020.100754.10.1016/j.pmatsci.2020.100754 ↗
3. L. Wang, Y. Jiao, R. Liu, D. Wang, Z. Yu, Y. Xi, K. Zhang, S. Xu, H. Liu, L. Wen, X. Xiao, W. Zhang, and J. Ji: JOM, 2024, vol. 76, pp. 353–61. https://doi.org/10.1007/s11837-023-06217-3.10.1007/s11837-023-06217-3 ↗
4. P. Koželj, S. Vrtnik, A. Jelen, S. Jazbec, Z. Jagličić, S. Maiti, M. Feuerbacher, W. Steurer, and J. Dolinšek: Phys. Rev. Lett., 2014, vol. 113, p. 107001. https://doi.org/10.1103/PhysRevLett.113.107001.10.1103/PhysRevLett.113.107001 ↗
5. F. Rohr, M.J. Winiarski, J. Tao, T. Klimczuk, and R.J. Cava: Proc. Natl. Acad. Sci., 2016, vol. 113, pp. 7144–50. https://doi.org/10.1073/pnas.1615926113.10.1073/pnas.1615926113 ↗
6. J. Kitagawa, S. Hamamoto, and N. Ishizu: Metals, 2020. https://doi.org/10.3390/met10081078.10.3390/met10081078 ↗
7. L. Sun and R.J. Cava: Phys. Rev. Mater., 2019, vol. 3, p. 090301. https://doi.org/10.1103/PhysRevMaterials.3.090301.10.1103/PhysRevMaterials.3.090301 ↗
8. C. Suryanarayana: Mater. Res. Lett., 2022, vol. 10, pp. 619–47. https://doi.org/10.1080/21663831.2022.2075243.10.1080/21663831.2022.2075243 ↗
9. A. Kumar, A. Singh, and A. Suhane: J. Mater. Res. Technol., 2022, vol. 17, pp. 2431–56. https://doi.org/10.1016/j.jmrt.2022.01.141.10.1016/j.jmrt.2022.01.141 ↗
10. J. Rodríguez-Carvajal: Physica B: Condens. Matter, 1993, vol. 192, pp. 55–69. https://doi.org/10.1016/0921-4526(93)90108-I.10.1016/0921-4526(93)90108-I ↗
11. J. Kansy: Nucl. Instrum. Methods Phys. Res. Sect. A: Accel. Spectrom. Detect. Assoc. Equip., 1996, vol. 374, pp. 235–44. https://doi.org/10.1016/0168-9002(96)00075-7.10.1016/0168-9002(96)00075-7 ↗
12. R. Idczak, P. Sobota, L.M. Tran, M. Babij, K. Idczak, W. Nowak, and A. Pikul: Metall. Mater. Trans. A, 2024, vol. 55A, pp. 523–36. https://doi.org/10.1007/s11661-023-07263-x.10.1007/s11661-023-07263-x ↗
13. A. Takeuchi, N. Chen, T. Wada, Y. Yokoyama, H. Kato, A. Inoue, and J.W. Yeh: Intermetallics, 2011, vol. 19, pp. 1546–54. https://doi.org/10.1016/j.intermet.2011.05.030.10.1016/j.intermet.2011.05.030 ↗
14. H.Y. Ding and K.F. Yao: J. Non-Cryst. Solids, 2013, vol. 364, pp. 9–12. https://doi.org/10.1016/j.jnoncrysol.2013.01.022.10.1016/j.jnoncrysol.2013.01.022 ↗
15. W. Muftah, J. Allport, and V. Vishnyakov: Surf. Coat. Technol., 2021, vol. 422, p. 127486. https://doi.org/10.1016/j.surfcoat.2021.127486.10.1016/j.surfcoat.2021.127486 ↗
16. X. Feng, C. Feng, and Y. Lu: Materials, 2022. https://doi.org/10.3390/ma15238568.10.3390/ma15238568 ↗
17. J.M. Campillo Robles and F. Plazaola: Defect and Diffusion in Metals. Defect and Diffusion Forum, vol. 213, Trans Tech Publications Ltd, Baech, 2003, p. 141-0.
18. J.M.C. Robles, E. Ogando, and F. Plazaola: J. Phys.: Condens. Matter, 2007, vol. 19, p. 176222. https://doi.org/10.1088/0953-8984/19/17/176222.10.1088/0953-8984/19/17/176222 ↗
19. C. Nagel, K. Rätzke, E. Schmidtke, J. Wolff, U. Geyer, and F. Faupel: Phys. Rev. B, 1998, vol. 57, pp. 10224–27. https://doi.org/10.1103/PhysRevB.57.10224.10.1103/PhysRevB.57.10224 ↗
20. P. Asoka-Kumar, J. Hartley, R. Howell, P.A. Sterne, and T.G. Nieh: Appl. Phys. Lett., 2000, vol. 77, pp. 1973–75. https://doi.org/10.1063/1.1313367.10.1063/1.1313367 ↗
21. K.M. Flores, D. Suh, R.H. Dauskardt, P. Asoka-Kumar, P.A. Sterne, and R.H. Howell: J. Mater. Res., 2002, vol. 17, pp. 1153–61. https://doi.org/10.1557/JMR.2002.0171.10.1557/JMR.2002.0171 ↗
22. Y.C. Jean, P.E. Mallon, and D.M. Schrader: Principles and Applications of Positron & Positronium Chemistry, World Scientific, Singapore, 2003.10.1142/5086 ↗
23. S.J. Tao: J. Chem. Phys., 2003, vol. 56, pp. 5499–510. https://doi.org/10.1063/1.1677067.10.1063/1.1677067 ↗
24. M. Eldrup, D. Lightbody, and J.N. Sherwood: Chem. Phys., 1981, vol. 63, pp. 51–58. https://doi.org/10.1016/0301-0104(81)80307-2.10.1016/0301-0104(81)80307-2 ↗
25. M.M. Collver and R.H. Hammond: Phys. Rev. Lett., 1973, vol. 30, pp. 92–95. https://doi.org/10.1103/PhysRevLett.30.92.10.1103/PhysRevLett.30.92 ↗