Influence of Cooling Rate After Destabilization on Microstructure and Hardness of a High-Cr Cast Iron
Source abstract
Abstract
Abstract This study investigates the impact of cooling rate after destabilization at 980 °C on the microstructure of 23 wt pct Cr–2.7wt pct C hypoeutectic high-Cr cast iron. Lowering cooling rate intensifies the secondary carbides formation, depleting carbon in austenite. This raises the martensite start temperature and lowers the bulk hardness. We thereby provide evidence explaining the origin of the sensitivity to cooling rate in high-Cr cast irons.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. C.P. Tabrett, I.R. Sare, and M.R. Ghomashchi: Int. Mater. Rev., 1996, vol. 41, pp. 59–82. https://doi.org/10.1179/imr.1996.41.2.59.10.1179/imr.1996.41.2.59 ↗
2. C.P. Tabrett and I.R. Sare: Wear, 1997, vol. 203–204, pp. 206–19. https://doi.org/10.1007/BF02664672.10.1007/BF02664672 ↗
3. K.-H.Z. Gahr and G.T. Eldis: Wear, 1980, vol. 64, pp. 175–94. https://doi.org/10.1016/0043-1648(80)90101-5.10.1016/0043-1648(80)90101-5 ↗
4. A. Bedolla-Jacuinde, R. Correa, I. Mejía, J.G. Quezada, and W.M. Rainforth: Wear, 2007, vol. 263, pp. 808–20. https://doi.org/10.1016/j.wear.2006.12.011.10.1016/j.wear.2006.12.011 ↗
5. Ö.N. Doǧan, J.A. Hawk, and G. Laird: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1315–28. https://doi.org/10.1007/s11661-997-0267-3.10.1007/s11661-997-0267-3 ↗
6. A. Wiengmoon, J.T.H. Pearce, and T. Chairuangsri: Mater. Chem. Phys., 2011, vol. 125, pp. 739–48. https://doi.org/10.1016/j.matchemphys.2010.09.064.10.1016/j.matchemphys.2010.09.064 ↗
7. A. Bedolla-Jacuinde: Int. J. Cast Met. Res., 2001, vol. 13, pp. 343–61. https://doi.org/10.1080/13640461.2001.11819416.10.1080/13640461.2001.11819416 ↗
8. B.H. Hinckley, K.F. Dolman, R. Wuhrer, A. Ray, and W. Yeung: Microsc. Microanal., 2008, vol. 14, pp. 550–51. https://doi.org/10.1017/S1431927608084067.10.1017/S1431927608084067 ↗
9. N.H.K. Luan, K. Koizumi, K. Mizuno, Y. Yamada, and T. Okuyama: Mater. Trans., 2019, vol. 60, pp. 2475–80. https://doi.org/10.2320/matertrans.F-M2019844.10.2320/matertrans.F-M2019844 ↗
10. A. Bedolla-Jacuinde, L. Arias, and B. Hernández: J. Mater. Eng. Perform., 2003, vol. 12, pp. 371–82. https://doi.org/10.1361/105994903770342881.10.1361/105994903770342881 ↗
11. H. Gasan and F. Erturk: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4993–5005. https://doi.org/10.1007/s11661-013-1851-3.10.1007/s11661-013-1851-3 ↗
12. A. Wiengmoon, T. Chairuangsri, A. Brown, R. Brydson, D.V. Edmonds, and J.T.H. Pearce: Acta Mater., 2005, vol. 53, pp. 4143–54. https://doi.org/10.1016/j.actamat.2005.05.019.10.1016/j.actamat.2005.05.019 ↗
13. C.P. Tabrett and I.R. Sare: Scripta Mater., 1998, vol. 38, pp. 1747–53. https://doi.org/10.1016/S1359-6462(98)00118-3.10.1016/S1359-6462(98)00118-3 ↗
14. V. Efremenko, K. Shimizu, and Y. Chabak: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5434–46. https://doi.org/10.1007/s11661-013-1890-9.10.1007/s11661-013-1890-9 ↗
15. J. Wang, Z. Sun, R. Zuo, C. Li, B. Shen, S. Gao, and S. Huang: J. Mater. Eng. Perform., 2006, vol. 15, pp. 316–19. https://doi.org/10.1361/105994906X108602.10.1361/105994906X108602 ↗
16. J. Wang, C. Li, H. Liu, H. Yang, B. Shen, S. Gao, and S. Huang: Mater Charact, 2006, vol. 56, pp. 73–78. https://doi.org/10.1016/j.matchar.2005.10.002.10.1016/j.matchar.2005.10.002 ↗
17. A.E. Karantzalis, A. Lekatou, and E. Diavati: J. Mater. Eng. Perform., 2009, vol. 18, pp. 1078–85. https://doi.org/10.1007/s11665-009-9353-6.10.1007/s11665-009-9353-6 ↗
18. G.L.F. Powell and G. Laird: J. Mater. Sci., 1992, vol. 27, pp. 29–35. https://doi.org/10.1007/BF02403640.10.1007/BF02403640 ↗
19. M.A. Guitar, U.P. Nayak, D. Britz, and F. Mücklich: Int. J. Met., 2020, vol. 14, pp. 755–65. https://doi.org/10.1007/s40962-020-00407-4.10.1007/s40962-020-00407-4 ↗
20. H.D.T. Hong, H.N. Hong, M.N. Ngoc, and Q.H.T. Ngoc: ISIJ Int., 2021, vol. 61, pp. 1660–68. https://doi.org/10.2355/ISIJINTERNATIONAL.ISIJINT-2020-581.10.2355/ISIJINTERNATIONAL.ISIJINT-2020-581 ↗
21. A. Wiengmoon, N. Tareelap, S. Imurai, T. Chairuangsri, and J.T.H. Pearce: Solid State Phenom., 2018, vol. 283, pp. 95–100. https://doi.org/10.4028/www.scientific.net/SSP.283.95.10.4028/www.scientific.net/SSP.283.95 ↗
22. K. Kishore, U. Kumar, N. Dinesh, and M. Adhikary: J. Fail. Anal. Prev., 2020, vol. 20, pp. 249–60. https://doi.org/10.1007/s11668-020-00836-7.10.1007/s11668-020-00836-7 ↗
23. Yi. Li, P.-X. Zhu, C. Tang, and Z. Sun: Crystals, 2022, vol. 12, p. 1332. https://doi.org/10.3390/cryst12101332.10.3390/cryst12101332 ↗
24. M. Tupaj, A.W. Orłowicz, A. Trytek, M. Mróz, G. Wnuk, and A.J. Dolata: Materials (Basel), 2020, vol. 13, pp. 1–13. https://doi.org/10.3390/ma13122760.10.3390/ma13122760 ↗
25. A. Gonzalez-Pocino, F. Alvarez-Antolin, and J. Asciensio-Lozano: Metals (Basel), 2019, vol. 9, p. 522.10.3390/met9050522 ↗
26. C. Le Nué, S.C. Gallo, A. Vahid, J. Wang, M. Taherishargh, H. Attar, D. Fabijanic, and M. Barnett: Metall. Mater. Trans. A, 2023, https://doi.org/10.1007/s11661-023-07216-4.10.1007/s11661-023-07216-4 ↗
27. N. Maruyama, S. Tabata, and H. Kawata: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1085–97. https://doi.org/10.1007/s11661-019-05617-y.10.1007/s11661-019-05617-y ↗
28. L. Xiao, Z. Fan, Z. Jinxiu, Z. Mingxing, K. Mokuang, and G. Zhenqi: Phys. Rev. B, 1995, vol. 52, pp. 9970–78. https://doi.org/10.1103/PhysRevB.52.9970.10.1103/PhysRevB.52.9970 ↗
29. Lu. Yuan, Yu. Haixuan, and R.D. Sisson: Mater. Sci. Eng. A, 2017, vol. 700, pp. 592–97. https://doi.org/10.1016/j.msea.2017.05.094.10.1016/j.msea.2017.05.094 ↗
30. H. Bhadeshia and R. Honeycombe: in Steels Microstruct. Prop., 4th ed., Elsevier, 2017, pp. 135–77. https://doi.org/10.1016/B978-0-08-100270-4.00005-6.10.1016/B978-0-08-100270-4.00005-6 ↗
31. D. Barbier: Adv. Eng. Mater., 2014, vol. 16, pp. 122–27. https://doi.org/10.1002/adem.201300116.10.1002/adem.201300116 ↗
32. L.F. Alvarez, C. Garcia, and V. Lopez: ISIJ Int., 1994, vol. 34, pp. 516–21. https://doi.org/10.2355/isijinternational.34.516.10.2355/isijinternational.34.516 ↗
33. C. Garcia de Andres and L.F. Alvarez: J. Mater. Sci., 1993, vol. 28, pp. 1264–68. https://doi.org/10.1007/BF01191962.10.1007/BF01191962 ↗
34. J.Y. Park and Y.S. Park: Mater. Sci. Eng. A, 2007, vol. 448–451, pp. 1131–34. https://doi.org/10.1016/j.msea.2006.03.134.10.1016/j.msea.2006.03.134 ↗
35. S.S. de Souza, P.S. Moreira, and G.L. de Faria: Mater. Res., 2020, vol. 23, pp. 1–9. https://doi.org/10.1590/1980-5373-mr-2019-0570.10.1590/1980-5373-mr-2019-0570 ↗
36. A. Ning, R. Gao, S. Yue, H. Guo, and L. Li: Mater. Res. Express, 2021, https://doi.org/10.1088/2053-1591/abd4b6.10.1088/2053-1591/abd4b6 ↗
37. D.V. Doane: J. Heat. Treat., 1979, vol. 1, pp. 5–30. https://doi.org/10.1007/BF02833206.10.1007/BF02833206 ↗
38. R.A. Grange, C.R. Hribal, and L.F. Porter: Met. Trans A, 1977, vol. 8A, pp. 1775–85. https://doi.org/10.1007/BF02646882.10.1007/BF02646882 ↗
39. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 40–57. https://doi.org/10.1016/S0921-5093(99)00288-9.10.1016/S0921-5093(99)00288-9 ↗
40. A. Wiengmoon, T. Chairuangsri, and J.T.H. Pearce: ISIJ Int., 2004, vol. 44, pp. 396–403. https://doi.org/10.2355/isijinternational.44.396.10.2355/isijinternational.44.396 ↗