journal article·2024-02

Effect of Crystal Orientation and Crystallographic Anisotropy on Shear Band Formation During Ductile Fracture in Fe Single Crystals

Gaddam Shiva Kumar, T. Venkatesh Varma, Abhijit Ghosh, Saikat Sarkar

Publisher page

Abstract

Shear bands are very common microstructural features in metals undergoing high plastic deformation. In processes like cold rolling, shear banding plays an essential role in obtaining the desired crystallographic texture. However, the exact deformation mechanism of shear bands is yet to be fully understood. This work explores the modeling of shear band formation and the effect of orientation of the crystal, prior to the deformation, through single crystal simulations. The effect of crystal orientation and crystallographic anisotropy on shear band formation is studied using a gradient damage model coupled with plasticity and crystallographic information. It is observed that the orientation affects shear band thickness and the strain at which shear bands are formed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. J.A. Hines, K.S. Vecchio, and S. Ahzi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 191–203.10.1007/s11661-998-0172-4 ↗
2. Q. Xue and G.T. Gray: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2435–46.10.1007/BF02586217 ↗
3. Q. Xue and G. Gray: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2447–58.10.1007/BF02586218 ↗
4. J. Cheng and S. Ghosh: Comput. Mater. Sci., 2013, vol. 69, pp. 494–504.10.1016/j.commatsci.2012.12.014 ↗
5. Y. Long, L. Peng, W. Zhang, H. Peng, J. Zhang, and X. Huang: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2064–71.10.1007/s11661-020-05695-3 ↗
6. M.C. Jo, S. Kim, H.K. Park, S.S. Hong, H.K. Kim, H.S. Kim, and S. Lee: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3384–91.10.1007/s11661-020-05814-0 ↗
7. D. Dorner, Y. Adachi, and K. Tsuzaki: Scripta Mater., 2007, vol. 57(8), pp. 775–78.10.1016/j.scriptamat.2007.06.048 ↗
8. N. Jia, D. Raabe, and X. Zhao: Acta Mater., 2014, vol. 76, pp. 238–51.10.1016/j.actamat.2014.05.036 ↗
9. N. Jia, P. Eisenlohr, F. Roters, D. Raabe, and X. Zhao: Acta Mater., 2012, vol. 60(8), pp. 3415–34.10.1016/j.actamat.2012.03.005 ↗
10. H. Zbib and E. Aifantis: Acta Mech., 1992, vol. 92(1), pp. 209–25.10.1007/BF01174177 ↗
11. J. Pamin: Comput. Mater. Sci., 2005, vol. 32(3), pp. 472–79.10.1016/j.commatsci.2004.09.018 ↗
12. L.Z. Mansouri, H. Chalal, and F. Abed-Meraim: Mech. Mater., 2014, vol. 76, pp. 64–92.10.1016/j.mechmat.2014.06.005 ↗
13. H.-B. Mühlhaus and E. Alfantis: Int. J. Solids Struct., 1991, vol. 28(7), pp. 845–57.10.1016/0020-7683(91)90004-Y ↗
14. A. Menzel and P. Steinmann: J. Mech. Phys. Solids, 2000, vol. 48(8), pp. 1777–96.10.1016/S0022-5096(99)00024-1 ↗
15. E. Kuhl and E. Ramm: Comput. Mater. Sci., 1999, vol. 16(1), pp. 176–85.10.1016/S0927-0256(99)00060-9 ↗
16. A. Emdadi and M. Asle Zaeem: Comput. Mater. Sci., 2021, vol. 186, p. 110057.10.1016/j.commatsci.2020.110057 ↗
17. N. Zhao, A. Roy, W. Wang, L. Zhao, and V.V. Silberschmidt: Mech. Mater., 2019, vol. 130, pp. 29–38.10.1016/j.mechmat.2019.01.006 ↗
18. E. Tanné, T. Li, B. Bourdin, J.-J. Marigo, and C. Maurini: J. Mech. Phys. Solids, 2018, vol. 110, pp. 80–99.10.1016/j.jmps.2017.09.006 ↗
19. K. Pham, H. Amor, J.-J. Marigo, and C. Maurini: Int. J. Damage Mech, 2011, vol. 20(4), pp. 618–52.10.1177/1056789510386852 ↗
20. S. Karthik, A. Rajagopal, and J. Reddy: Mech. Mater., 2021, vol. 157, p. 103797.10.1016/j.mechmat.2021.103797 ↗
21. T.K. Mandal, V.P. Nguyen, and J.-Y. Wu: Eng. Fract. Mech., 2020, vol. 235, p. 107169.10.1016/j.engfracmech.2020.107169 ↗
22. R. Alessi: (Ph.D. thesis), Ecole Polytechnique X, 2013, https://pastel.archives-ouvertes.fr/pastel-00847970.
23. R. Alessi, J.-J. Marigo, and S. Vidoli: Mech. Mater., 2015, vol. 80, pp. 351–67.10.1016/j.mechmat.2013.12.005 ↗
24. S. Brach, E. Tanné, B. Bourdin, and K. Bhattacharya: Comput. Methods Appl. Mech. Eng., 2019, vol. 353, pp. 44–65.10.1016/j.cma.2019.04.027 ↗
25. E. Tanné: (Ph.D. thesis), Universite Paris-Saclay, 2017, https://pastel.archives-ouvertes.fr/tel-01758354.
26. R. Alessi, J.-J. Marigo, C. Maurini, and S. Vidoli: Int. J. Mech. Sci., 2018, vol. 149, pp. 559–76.10.1016/j.ijmecsci.2017.05.047 ↗
27. T.C.T. Ting: Anisotropic Elasticity: Theory and Applications, Oxford University Press, Oxford, 1996, pp. 32–64.10.1093/oso/9780195074475.001.0001 ↗
28. S.S. Rao: Engineering Optimization Theory and Practice, Wiley, Hoboken, 2019, pp. 347–448.10.1002/9781119454816 ↗
29. M.A. Msekh, J.M. Sargado, M. Jamshidian, P.M. Areias, and T. Rabczuk: Comput. Mater. Sci., 2015, vol. 96, pp. 472–84.10.1016/j.commatsci.2014.05.071 ↗
30. C. Geuzaine and J.-F. Remacle: Int. J. Numer. Methods Eng., 2009, vol. 79(11), pp. 1309–31.10.1002/nme.2579 ↗
31. K. Spencer, S. Corbin, and D. Lloyd: Mater. Sci. Eng. A, 2002, vol. 325(1), pp. 394–404.10.1016/S0921-5093(01)01481-2 ↗
32. G.E. Dieter and D. Bacon: Mechanical Metallurgy, McGraw-hill, New York, 1986, pp. 103–44.
33. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, Oxford, 1994, pp. 532–32.