Microstructural Characterization of 70 Wt Pct WC-NiBSi Deposited by PTA-AM
Source abstract
Abstract
Plasma transferred arc additive manufacturing (PTA-AM) was used to deposit a cylinder composed of 70wt pct WC - NiBSi metal matrix composites. Two defects dominated the microstructure: areas completely void of WC termed denuded regions and large pores. These defects reduced the overall carbide mass percent below 70 wt pct. Electromagnetic levitation (EML) was used to correlate the secondary dendrite arm spacing to the solidification cooling rate in order to estimate the solidification cooling rate of the PTA-AM sample throughout the entire cylinder build. The solidification cooling rate differed by two orders of magnitude between the first and last layers of the sample, resulting in coarsening of the dendritic microstructure. An inverse correlation was found between the WC dissolution and the solidification cooling rate, where slower cooling rates resulted in upwards of 28 wt pct W within the (gamma )-Ni dendrites. Thermo-calc software was used to model 70 wt pct WC - NiBSi under Scheil solidification conditions, and were compared with the rapidly solidified microstructure from PTA-AM. A possible mechanism for denuded regions is exceeding the maximum packing of angular WC (62 wt pct), causing localized pools of matrix material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. A.H. Jones and P. Roffey: Wear , 2009, vol. 267, pp. 925–33. https://doi.org/10.1016/j.wear.2009.01.042.10.1016/j.wear.2009.01.042 ↗
2. S. Lata Sinha, S. Kumar Dewangan, and A. Sharma: Part. Sci. Technol., 2017, vol. 35, pp. 103–18. https://doi.org/10.1080/02726351.2015.1131792.10.1080/02726351.2015.1131792 ↗
3. T. Liyanage, G. Fisher, and A.P. Gerlich: Surf. Coat. Technol., 2010, vol. 205, pp. 759–65. https://doi.org/10.1016/j.surfcoat.2010.07.095.10.1016/j.surfcoat.2010.07.095 ↗
4. T. Liyanage, G. Fisher, and A.P. Gerlich: Wear, 2012, vol. 274–275, pp. 345–54. https://doi.org/10.1016/j.wear.2011.10.001.10.1016/j.wear.2011.10.001 ↗
5. R. Sundaramoorthy, S.X. Tong, D. Parekh, and C. Subramanian: Wear, 2017, vol. 376–377, pp. 1720–27. https://doi.org/10.1016/j.wear.2017.01.027.10.1016/j.wear.2017.01.027 ↗
6. J. Chen, X.Y. Li, T. Bell, and H. Dong: Wear, 2008, vol. 264, pp. 157–65). https://doi.org/10.1016/J.WEAR.2006.12.012.10.1016/J.WEAR.2006.12.012 ↗
7. A. Czupryński: Materials, 2021, vol. 14. https://doi.org/10.3390/ma14092382.10.3390/ma14092382 ↗
8. M.S. Sawant, and N.K. Jain: Wear, 2017, vol. 378–379, pp. 155–64. https://doi.org/10.1016/J.WEAR.2017.02.041.10.1016/J.WEAR.2017.02.041 ↗
9. Q.Y. Hou, J.S. Gao, and F. Zhou: Surf. Coat. Technol., 2005, vol. 194, pp. 238–43. https://doi.org/10.1016/J.SURFCOAT.2004.07.065.10.1016/J.SURFCOAT.2004.07.065 ↗
10. B. Song, Z. Wang, Q. Yan, Y. Zhang, J. Zhang, C. Cai, Q. Wei, and Y. Shi: Mater. Sci. Eng. A, 2017, vol. 707, pp. 478–87. https://doi.org/10.1016/J.MSEA.2017.09.092.10.1016/J.MSEA.2017.09.092 ↗
11. Zhang, Z., Kovacevic, R.: J. Manuf. Process., 2019, vol. 38, pp. 63–75. https://doi.org/10.1016/J.JMAPRO.2019.01.001.10.1016/J.JMAPRO.2019.01.001 ↗
12. S.V. Prasad, and R. Asthana: Tribol. Lett., 2004, vol. 17, pp. 445–53. https://doi.org/10.1023/B:TRIL.0000044492.91991.f3.10.1023/B:TRIL.0000044492.91991.f3 ↗
13. Samal, P., Vundavilli, P.R., Meher, A., Mahapatra, M.M.: J. Manuf. Process., 2020, vol. 59, pp. 131–52. https://doi.org/10.1016/J.JMAPRO.2020.09.010.10.1016/J.JMAPRO.2020.09.010 ↗
14. K.A. Sandy, H. Henein, and K.M. Jaansalu: Can. Metall. Qtly., 2009, vol. 48, pp. 133–43. https://doi.org/10.1179/cmq.2009.48.2.133.10.1179/cmq.2009.48.2.133 ↗
15. A.R. Kennedy: J. Mater. Sci., 2002, vol. 37, pp. 317–23. https://doi.org/10.1023/A:1013600328599.10.1023/A:1013600328599 ↗
16. S.V. Nair, J.K. Tien, andR.C. Bates: Int. Met. Rev., 1958, vol. 30, pp. 275–90. https://doi.org/10.1179/imtr.1985.30.1.275.10.1179/imtr.1985.30.1.275 ↗
17. A. Riquelme, P. Rodrigo, M.D. Escalera-Rodríguez, and J. Rams: Results Phys., 2019, vol. 13, p. 102160. https://doi.org/10.1016/J.RINP.2019.102160.10.1016/J.RINP.2019.102160 ↗
18. A. Perminov, M. Jurisch, G. Bartzsch, H. Biermann, T. Weißgärber, and O. Volkova: Mater. Sci. Eng. A, 2021, vol. 813, p. 141130. https://doi.org/10.1016/J.MSEA.2021.141130.10.1016/J.MSEA.2021.141130 ↗
19. G. Muvvala, S. Mullick, and A.K. Nath: Surf. Coat. Technol., 2020, vol. 399, p. 126100. https://doi.org/10.1016/J.SURFCOAT.2020.126100.10.1016/J.SURFCOAT.2020.126100 ↗
20. X. Yang, L. Wang, Z. Gao, Q. Wang, M. Du, and X. Zhan: Opt. Laser Technol., 2022, vol. 153, p. 108232. https://doi.org/10.1016/J.OPTLASTEC.2022.108232.10.1016/J.OPTLASTEC.2022.108232 ↗
21. M. Ostolaza, J.I. Arrizubieta, M. Cortina, and A. Lamikiz: Proc. CIRP, 2020, vol. 94, pp. 330–35. https://doi.org/10.1016/J.PROCIR.2020.09.062.10.1016/J.PROCIR.2020.09.062 ↗
22. G. Fisher, T. Wolfe, and K. Meszaros: J. Therm. Spray Technol., 2013, vol. 22, pp. 764–71. https://doi.org/10.1007/s11666-012-9877-4.10.1007/s11666-012-9877-4 ↗
23. D. Rose, J. Forth, H. Henein, T. Wolfe, and A.J. Qureshi: Comput. Mater. Sci., 2022, vol. 210, p. 111391. https://doi.org/10.1016/J.COMMATSCI.2022.111391.10.1016/J.COMMATSCI.2022.111391 ↗
24. H. Hotz, M. Zimmermann, S. Greco, B. Kirsch, and J.C. Aurich: J. Manuf. Process., 2021, vol. 68, pp. 1524–34. https://doi.org/10.1016/J.JMAPRO.2021.06.068.10.1016/J.JMAPRO.2021.06.068 ↗
25. A. Choudhary, A. Sadhu, S. Sarkar, A.K. Nath, and G. Muvvala: Surf. Coat. Technol., 2020, vol. 404, p. 126480. https://doi.org/10.1016/J.SURFCOAT.2020.126480.10.1016/J.SURFCOAT.2020.126480 ↗
26. T. Lehmann, D. Rose, E. Ranjbar, M. Ghasri-Khouzani, M. Tavakoli, H. Henein, T. Wolfe, and A. Jawad Qureshi: Int. Mater. Rev., 2022, vol. 67, pp. 410–59. https://doi.org/10.1080/09506608.2021.1971427.10.1080/09506608.2021.1971427 ↗
27. J.G.M. Rojas, M. Ghasri-Khouzani, T. Wolfe, B. Fleck, H. Henein, and A.J. Qureshi: Int. J. Adv. Manuf. Technol., 2021, vol. 113, pp. 1451–68. https://doi.org/10.1007/s00170-020-06388-2.10.1007/s00170-020-06388-2 ↗
28. C. Liu, H. Peng, Y. Zhao, Y. Yuan, H.-B. Guo, and H.-B. Xu: Rare Metals, 2019, vol. 38, pp. 814–23. https://doi.org/10.1007/s12598-018-1096-9.10.1007/s12598-018-1096-9 ↗
29. S. Zhao, L. Yang, Y. Huang, and S. Xu: Addit. Manuf., 2021, vol. 38, p. 101738. https://doi.org/10.1016/J.ADDMA.2020.101738.10.1016/J.ADDMA.2020.101738 ↗
30. T. Wolfe: Homogeneity of Metal Matrix Composites Deposited by Plamsa Transferred Arc Welding. Ph. d., University of Alberta, Edmonton Alberta, 2010. http://era.library.ualberta.ca/public/view/item/uuid:014e9db2-a41a-4a0b-8fd3-e2634fda1432.
31. G. Lohöfer: SIAM J. Appl. Math., 1989, vol. 49, pp. 567–81. https://doi.org/10.1137/0149032.10.1137/0149032 ↗
32. M.G. Frohberg: Thermochim. Acta, 1999, vol. 337, pp. 7–17. https://doi.org/10.1016/S0040-6031(99)00159-8.10.1016/S0040-6031(99)00159-8 ↗
33. Q. Lv, H. Jiang, X. Jiao, J. Liu, J. Liu, and Z. Yang: IP Adv., 2018, vol. 8. https://doi.org/10.1063/1.5055678.10.1063/1.5055678 ↗
34. C.-A. Gandin, D. Tourret, T. Volkmann, D.M. Herlach, A. Ilbagi, and H. Henein: 2012. https://doi.org/10.1002/9783527647903.ch19.10.1002/9783527647903.ch19 ↗
35. J.E. Rodriguez, C. Kreischer, T. Volkmann, and D.M. Matson: Acta Mater., 2017, vol. 122, pp. 431–37. https://doi.org/10.1016/j.actamat.2016.09.047.10.1016/j.actamat.2016.09.047 ↗
36. A. Saud, C.-A. Gandin, M. Bellet, T. Volkmann, D. Herlach: Simulation of shrinkage-induced macrosegregation in a multicomponent alloy during reduced-gravity solidification BT - TMS 2016 145th Annual Meeting & Exhibition, pp. 35–42 (Springer, Cham, 2016).10.1007/978-3-319-48254-5_5 ↗
37. C. Karrasch, T. Volkmann, J. Valloton, M. Kolbe, and D.M. Herlach: IOP Conf. Ser. Mater. Sci. Eng., 2016, vol. 117, p. 12015. https://doi.org/10.1088/1757-899x/117/1/012015.10.1088/1757-899x/117/1/012015 ↗
38. M. Mohr, R.K. Wunderlich, K. Zweiacker, S. Prades-Rödel, R. Sauget, A. Blatter, R. Logé, A. Dommann, A., Neels, W.L. Johnson, and H.J. Fecht: npj Microgravity, 2019, vol. 5. https://doi.org/10.1038/s41526-019-0065-4.10.1038/s41526-019-0065-4 ↗
39. H.J. Fecht, and R.K. Wunderlich: Jom, 2017, vol. 69, pp. 1261–68. https://doi.org/10.1007/s11837-017-2417-4.10.1007/s11837-017-2417-4 ↗
40. R.K. Wunderlich, M. Mohr, Y. Dong, U. Hecht, M. Matson, R. Hyers, G. Bracker, J. Lee, S. Schneider, X. Xiao, and H.-J. Fecht: Int. J. Mater. Res., 2021, vol. 112, pp. 770–81. https://doi.org/10.1515/ijmr-2021-8266.10.1515/ijmr-2021-8266 ↗
41. C.D. Cao, T. Letzig, G.P. Görler, and D.M. Herlach: J. Alloys Compd., 2001, vol. 325, pp. 113–17. https://doi.org/10.1016/S0925-8388(01)01276-2.10.1016/S0925-8388(01)01276-2 ↗
42. Y.K. Zhang, J. Gao, L.L. Wei, M. Kolbe, T. Volkmann, and D. Herlach: J. Mater. Sci., 2011, vol. 46, pp. 6603–08. https://doi.org/10.1007/s10853-011-5609-2.10.1007/s10853-011-5609-2 ↗
43. S. Luo, H. Wang, Z. Gao, Y. Wu, and H. Wang: Mater. Des., 2021, vol. 212, p. 110264. https://doi.org/10.1016/J.MATDES.2021.110264.10.1016/J.MATDES.2021.110264 ↗
44. S.N. El Moghazi, T. Wolfe, D.G. Ivey, and H. Henein: Int. J. Adv. Manuf. Technol., 2020, vol. 108, pp. 2301–13. https://doi.org/10.1007/s00170-020-05540-2.10.1007/s00170-020-05540-2 ↗
45. D.M. Herlach: Metals, 2014, vol. 4, pp. 196–234. https://doi.org/10.3390/met4020196.10.3390/met4020196 ↗
46. E.B. Ferreira, M.L. Lima, and E.D. Zanotto: J. Am. Ceram. Soc., 2010, vol. 93, pp. 3757–63. https://doi.org/10.1111/j.1551-2916.2010.03976.x.10.1111/j.1551-2916.2010.03976.x ↗
47. A. Kagawa, M. Hirata, and Y. Sakamoto: J. Mater. Sci., 1990, vol. 25, pp. 5063–69. https://doi.org/10.1007/BF00580130.10.1007/BF00580130 ↗
48. A.S. Kurlov, A.I. Gusev: Inorg. Mater., 2006, vol. 42, pp. 121–27. https://doi.org/10.1134/S0020168506020051/METRICS.10.1134/S0020168506020051/METRICS ↗
49. R.V. Sara: J. Am. Ceram. Soc., 1965, vol. 48, pp. 251–57. https://doi.org/10.1111/J.1151-2916.1965.TB14731.X.10.1111/J.1151-2916.1965.TB14731.X ↗
50. Z. Hu, X. Qin, Y. Li, and M. Ni: J. Mech. Sci. Technol., 2020, vol. 34, pp. 1683–95. https://doi.org/10.1007/S12206-020-0331-0.10.1007/S12206-020-0331-0 ↗
51. B. Xu, X. Tan, X. Gu, D. Ding, Y. Deng, Z. Chen, and J. Xu: Rapid Prototyp. J., 2019, vol. 25, pp. 1637–46. https://doi.org/10.1108/RPJ-11-2018-0295/FULL/PDF.10.1108/RPJ-11-2018-0295/FULL/PDF ↗
52. D.S. Shim, G.Y. Baek, J.S. Seo, G.Y. Shin, K.P. Kim, and K.Y. Lee: Opt. Laser Technol., 2016, vol. 86, pp. 69–78. https://doi.org/10.1016/J.OPTLASTEC.2016.07.001.10.1016/J.OPTLASTEC.2016.07.001 ↗
53. N. Bhardwaj: Fused Filament Fabrication of Metal-Ceramic High-Density Polyethylene Composites. Master’s of Science, University of Alberta, 2022. https://doi.org/10.7939/r3-bg6d-vr86.10.7939/r3-bg6d-vr86 ↗
54. S. Zhou, X. Zeng, Q. Hu, and Y. Huang: Appl. Surf. Sci., 2008, vol. 255, pp. 1646–53. https://doi.org/10.1016/J.APSUSC.2008.04.003.10.1016/J.APSUSC.2008.04.003 ↗
55. Z. Weng, A. Wang, X. Wu, Y. Wang, and Z. Yang: Surf. Coat. Technol., 2016, vol. 304, pp. 283–92. https://doi.org/10.1016/J.SURFCOAT.2016.06.081.10.1016/J.SURFCOAT.2016.06.081 ↗
56. S.-K. Rittinghaus and J. Zielinski: Metall. Mater. Trans. A, 2021, vol. 52, pp. 1106–16. https://doi.org/10.1007/s11661-021-06139-2.10.1007/s11661-021-06139-2 ↗
57. A. Sadhu, A. Choudhary, S., Sarkar, A.M. Nair, P. Nayak, S.D. Pawar, G. Muvvala, S.K. Pal, and A.K., Nath: Surf. Coat. Technol., 2020, vol. 389, p. 125646. https://doi.org/10.1016/j.surfcoat.2020.125646.10.1016/j.surfcoat.2020.125646 ↗
58. N.A. Kistler, D.J. Corbin, A.R. Nassar, E.W. Reutzel, and A.M. Beese: J. Mater. Process. Technol., 2019, vol. 264, pp. 172–81. https://doi.org/10.1016/J.JMATPROTEC.2018.08.041.10.1016/J.JMATPROTEC.2018.08.041 ↗
59. G.J. Marshall, W.J. Young, S.M. Thompson, N. Shamsaei, S.R. Daniewicz, and S. Shao: JOM, 2016, vol. 68, pp. 778–90. https://doi.org/10.1007/S11837-015-1767-Z/FIGURES/11.10.1007/S11837-015-1767-Z/FIGURES/11 ↗
60. N. El-Bagoury, and A. Nofal: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7793–7800. https://doi.org/10.1016/J.MSEA.2010.08.050.10.1016/J.MSEA.2010.08.050 ↗
61. E. Badisch, and M. Kirchgaßner: Surf. Coat. Technol., 2008, vol. 202, pp. 6016–22. https://doi.org/10.1016/J.SURFCOAT.2008.06.185.10.1016/J.SURFCOAT.2008.06.185 ↗
62. M. Morishita, K. Koyama, K. Maeda, G. Zhang: Mater. Trans. JIM, 1999, vol. 40, pp. 600–05. https://doi.org/10.2320/matertrans1989.40.600.10.2320/matertrans1989.40.600 ↗
63. J. Xu, T. Yang, Z. Li, X. Wang, Y. Xiao, and Z. Jian: Sci. Rep., 2020, vol. 10, pp. 1–5. https://doi.org/10.1038/s41598-019-56079-6.10.1038/s41598-019-56079-6 ↗
64. D.Z.f.L.-u. Raumfahrt: Unpublished Work, 2023.
65. L. Elmquist, and A. Diószegi: 2013, vol. 23, pp. 44–50. https://doi.org/10.1179/174313309X436664.10.1179/174313309X436664 ↗
66. M. Fenech, M. Grech, and J.C. Betts: Surf. Coat. Technol., 2012, vol. 207, pp. 211–17. https://doi.org/10.1016/J.SURFCOAT.2012.06.063.10.1016/J.SURFCOAT.2012.06.063 ↗
67. X. Wang, S. Zhou, X. Dai, J. Lei, J. Guo, Z. Gu, and T. Wang: Int. J. Refract. Met. Hard Mater., 2017, vol. 64, pp. 234–41. https://doi.org/10.1016/J.IJRMHM.2016.11.001.10.1016/J.IJRMHM.2016.11.001 ↗
68. T.E. Abioye, P.K. Farayibi, D.G. McCartney, and A.T. Clare: J. Mater. Process. Technol., 2016, vol. 231, pp. 89–99. https://doi.org/10.1016/J.JMATPROTEC.2015.12.023.10.1016/J.JMATPROTEC.2015.12.023 ↗
69. M. Xia, D. Gu, C. Ma, H. Zhang, D. Dai, H. Chen, C. Li, Z. Zhou, G. Chen, and I. Kelbassa: J. Alloys Compd., 2019, vol. 777, pp. 693–702. https://doi.org/10.1016/J.JALLCOM.2018.11.056.10.1016/J.JALLCOM.2018.11.056 ↗
70. S. Zhao, C. Jia, Y. Yuan, L. Wang, Y. Huang, and L. Yang: Int. J. Refract. Met. Hard Mater., 2022, vol. 103, 105720. https://doi.org/10.1016/J.IJRMHM.2021.105720.10.1016/J.IJRMHM.2021.105720 ↗
71. T. Rong, D. Gu, Q. Shi, S. Cao, and M., Xia: Surf. Coat. Technol., 2016, vol. 307, pp. 418–27. https://doi.org/10.1016/J.SURFCOAT.2016.09.011.10.1016/J.SURFCOAT.2016.09.011 ↗
72. S.S. Babu, R.P. Martukanitz, K.D. Parks, and S.A. David: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1189–1200. https://doi.org/10.1007/S11661-002-0220-4.10.1007/S11661-002-0220-4 ↗
73. Q. Wang, Q. Li, L. Zhang, D.X. Chen, H. Jin, J.D. Li, J.W. Zhang, and C.Y. Ban: Ceram. Int., 2022, vol. 48, 7905–17. https://doi.org/10.1016/J.CERAMINT.2021.11.338.10.1016/J.CERAMINT.2021.11.338 ↗