Multiplicity and Separability of the Mechanisms of Liquid Metal Embrittlement in the Ga–In–Al System
Source abstract
Abstract
Abstract The study of liquid metal embrittlement has historically been plagued by apparently anomalous behavior that defies mechanistic understanding. Recently, the authors hypothesized that many seemingly contradictory results could be explained by considering liquid metal embrittlement as multiple mechanisms rather than as a monolith. In this work, that hypothesis was tested by exposing 5052 aluminum plate to Ga and a eutectic gallium–indium (eGaIn) alloy in environments with varied humidity. The results were captured via timelapse photography and optical microscopy and the resultant grain boundary penetration rates were measured. Two distinct liquid metal embrittlement mechanisms, liquid metal corrosion and grain boundary wetting, were observed. These mechanisms interacted constructively, but were separable via control of the humidity during exposure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. M.D. Dickey: Adv. Mater., 2017, vol. 29(27), pp. 1–9.10.1002/adma.201606425 ↗
2. V. Bharambe, D.P. Parekh, C. Ladd, K. Moussa, M. Dickey, and J.J. Adams: IEEE Antennas Wirel. Prop. Lett., 2018, vol. 300, pp. 1–4.
3. H. Kim, D.A. Boysen, J.M. Newhouse, B.L. Spatocco, B. Chung, P.J. Burke, D.J. Bradwell, K. Jiang, A.A. Tomaszowska, K. Wang, W. Wei, L.A. Ortiz, S.A. Barriga, S.M. Poizeau, and D.R. Sadoway: Chem. Rev., 2013, vol. 113(3), pp. 2075–99.10.1021/cr300205k ↗
4. A. Alemberti, V. Smirnov, C. F. Smith, and M. Takahashi: Overview of lead-cooled fast reactor activities, 2014.10.1016/j.pnucene.2013.11.011 ↗
5. F.L. Tabare: Plasma Phys. Control. Fusion, 2016, vol. 58(1), pp. 1–8.
6. W.H. Johnson: Proc. R. Soc. Lond., 1874, vol. 23(156–163), pp. 168–79.
7. M.M. Chaevskii and V.V. Popovich: Fiz.-Khim. Mekh. Mater., 1966, vol. 2(2), pp. 143–48.
8. M.J. Kelley and N.S. Stoloff: Metall. Trans. A, 1975, vol. 6A(1), pp. 159–66.10.1007/BF02673684 ↗
9. J.E. Norkett, M.D. Dickey, and V.M. Miller: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 2158–72.10.1007/s11661-021-06256-y ↗
10. C. Elbaum: Trans. Metall. Soc. AIME, 1959, vol. 215(3), pp. 476–78.
11. W.R. Goggin and J.W. Moberly: Trans. ASM, 1966, vol. 59, pp. 315–23.
12. L. Peeters, C. Roques-Carmes, M. Aucouturier, and G. Wyon: Memoires Scientifiques Rev Metall., 1972, vol. 69(2), pp. 81–95.
13. R. Tanaka, P.-K. Choi, H. Koizumi, and S.-I. Hyodo: Mater. Trans., 2001, vol. 42(1), pp. 138–40.10.2320/matertrans.42.138 ↗
14. K. Ina and H. Koizumi: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 390–94.10.1016/j.msea.2004.05.042 ↗
15. J. Luo, H. Cheng, K.M. Asl, C.J. Kiely, and M.P. Harmer: Science, 2011, vol. 333(6050), pp. 1730–33.10.1126/science.1208774 ↗
16. J.E. Norkett and V.M. Miller: JOM, 2020, vol. 72(2), pp. 860–67.10.1007/s11837-019-03954-2 ↗
17. W. Rostoker, J. McCaughey, and H. Markus: Embrittlement by Liquid Metals, Reinhold Publishing Corporation, New York, 1960.
18. K. Lambrinou, E. Charalampopoulou, T. Van der Donck, R. Delville, and D. Schryvers: J. Nucl. Mater., 2017, vol. 490(2017), pp. 9–27.10.1016/j.jnucmat.2017.04.004 ↗
19. K.A. Unocic and D.T. Hoelzer: J. Nucl. Mater., 2016, vol. 479, pp. 357–64.10.1016/j.jnucmat.2016.07.017 ↗
20. R. H. Hiltz: in J. E. Draley and J. R. Weeks (eds.), Corrosion by Liquid Metals: Proceedings of the Sessions on Corrosion by Liquid Metals, Springer, Boston, 1970.
21. D.R. Lesuer, J.B. Bergin, S.A. McInturff, and B.A. Kuhn: Microstruct. Sci., 1981, vol. 9, pp. 256–66.
22. C.F. Old and P. Trevena: Metal Sci., 1981, vol. 15, pp. 281–85.10.1179/030634581790426778 ↗
23. M.R. Pinnel and J.E. Bennett: J. Mater. Sci., 1972, vol. 7(9), pp. 1016–26.10.1007/BF00550065 ↗
24. S.P. Lynch: Metall. Mater. Trans. A, 2013, vol. 44A(3), pp. 1209–29.10.1007/s11661-012-1359-2 ↗
25. M.H. Kamdar and A.R.C. Westwood: Acta Metall., 1968, vol. 16(November), pp. 1335–42.10.1016/0001-6160(68)90154-5 ↗
26. C. M. Preece and A. R. C. Westwood: in P. L. Pratt (ed.), Proceedings of the 2nd International Conference on Fracture, Chapman and Hall, London, 1969 pp. 37/1–37/11.
27. A. Legris, J.B. Vogt, A. Verleene, and I. Serre: J. Mater. Sci., 2005, vol. 40, pp. 2459–63.10.1007/s10853-005-1975-y ↗
28. A.H. Maitland and G.A. Chadwick: Philos. Magn., 1969, vol. 19(160), pp. 645–51.10.1080/14786436908216323 ↗
29. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9(7), pp. 671–75.10.1038/nmeth.2089 ↗
30. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
31. O.V. Mishin and B. Bay: Metall. Mater. Trans. A, 2000, vol. 31A(6), pp. 1653–62.10.1007/s11661-000-0175-2 ↗
32. T. Mae and S. Hori: Light Metal, 1984, vol. 34(1), pp. 3–7.10.2464/jilm.34.3 ↗
33. E. Pereiro-Lopez, W. Ludwig, D. Bellet, and J. Baruchel: Defect and Diffusion Forum, 2003.
34. M. Rajagopalan, M.A. Bhatia, M.A. Tschopp, D.J. Srolovitz, and K.N. Solanki: Acta Mater., 2014, vol. 73, pp. 312–25. https://doi.org/10.1016/j.actamat.2014.04.011.10.1016/j.actamat.2014.04.011 ↗
35. D.J. Goddard and J.A. William: J. Inst. Met., 1971, vol. 99, pp. 323–24.
36. C. Roques-Carmes, M. Aucouturier, and P. Lacombe: Metal Sci. J., 1973, vol. 7, p. 128.10.1179/030634573790445677 ↗
37. C.A.P. Horton and K.J. Goddard: Metallography, 1973, vol. 139, pp. 131–39.10.1016/0026-0800(73)90005-0 ↗
38. N. Birbilis, R. Zhang, M.L. Lim, R.K. Gupta, C.H. Davies, S.P. Lynch, R.G. Kelly, and J.R. Scully: Corrosion, 2013, vol. 69(4), pp. 396–402.10.5006/0804 ↗
39. J.E. Bennett and M.R. Pinnel: J. Mater. Sci., 1973, vol. 8(8), pp. 1189–93.10.1007/BF00632772 ↗
40. D.O. Flamini, S.B. Saidman, and J.B. Bessone: Corros. Sci., 2006, vol. 48(6), pp. 1413–25.10.1016/j.corsci.2005.05.014 ↗
41. S.C. Tan, H. Gui, X.H. Yang, B. Yuan, S.H. Zhan, and J. Liu: Int. J. Hydrogen Energy, 2016, vol. 41(48), pp. 22663–67.10.1016/j.ijhydene.2016.10.090 ↗
42. A.V. Ilyukhina, O.V. Kravchenko, B.M. Bulychev, and E.I. Shkolnikov: Int. J. Hydrogen Energy, 2010, vol. 35(5), pp. 1905–10. https://doi.org/10.1016/j.ijhydene.2009.12.118.10.1016/j.ijhydene.2009.12.118 ↗
43. M.V. Trenikhin, V. Bubnov, I. Nizovskii, and V.K. Duplyakin: Inorg. Mater., 2006, vol. 42(3), pp. 256–60.10.1134/S0020168506030083 ↗
44. C.D.S. Tuck, J.A. Hunter, and G.M. Scamans: J. Electrochem. Soc., 1987, vol. 134(12), pp. 2970–81.10.1149/1.2100325 ↗
45. D.O. Flamini and S.B. Saidman: J. Appl. Electrochem., 2008, vol. 38(5), pp. 663–68.10.1007/s10800-008-9489-3 ↗
46. J.U. Chavarin: Corrosion, 1991, vol. 47(6), pp. 472–79.10.5006/1.3585281 ↗
47. R.P. Elliott and F.A. Shunk: Bull. Alloy Phase Diagr., 1980, vol. 1(1), pp. 73–76.10.1007/BF02883298 ↗
48. D.G. Kolman, R. Chavarria, and R. Kolman: J. Testing Eval., 2010, vol. 30, pp. 452–56.10.1520/JTE12336J ↗