Inhibition of Intergranular Corrosion in Austenitic Stainless Steels Through Critical Near-Surface Plastic Deformation and Aging
Source abstract
Abstract
Inhibition of high intergranular corrosion susceptibility (HIGCS) in austenitic stainless steels can be achieved by healing Cr-depleted zones through microstructural changes. A combination of near-surface plastic deformation introduced by shot-peening (SP) and aging is used to promote Cr diffusion by exposing nanocrystalline structures to high temperatures. The extent of Cr diffusion level was found to be controlled by the grain size and dislocation density. In a highly deformed layer, HIGCS inhibition process is accelerated due to its high density of boundaries and dislocations. However, an undesirable Cr-rich sigma phase precipitates in the severely SPed state during aging leading to the formation of new Cr-depleted zones. The thermal stability and general corrosion resistance are affected during the HIGCS inhibition process. The main objective of this work is to efficiently improve the intergranular corrosion resistance through a combination of near-surface grain refinement introduced by SP and a subsequent aging treatment without degrading the thermal stability and general corrosion resistance of the material. A criterion based on plastic deformation critical state controlled by parameters of the SP process, viz. pressure and time, is proposed to avoid undesirable Cr-rich sigma phase, and be sufficient for Cr-depleted zones to heal. In that way, the efficiency and stability of the HIGCS inhibition process are ensured. The required aging time to obtain HIGCS inhibition was considerably shortened (viz. 10 hours at 650 °C) by choosing an optimal critical deformation level.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. R. Viswanathan, J. Sarver, and J.M. Tanzosh: J. Mater. Eng. Perform., 2006, vol. 15, pp. 255–74.10.1361/105994906X108756 ↗
2. X. Wang, Y. Li, D. Chen, and J. Sun: Mater. Sci. Eng. A, 2019, vol. 754, pp. 238–45.10.1016/j.msea.2019.03.086 ↗
3. J. Jiang and L. Zhu: Mater. Sci. Eng. A, 2012, vol. 539, pp. 170–76.10.1016/j.msea.2012.01.076 ↗
4. O. Ping, H. Xing, and J. Sun: Metall. Mater. Trans. A., 2014, vol. 46A, pp. 1–5.
5. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 5698–5703.10.1007/s11661-016-3764-4 ↗
6. K. Kaneko, T. Fukunaga, K. Yamada, N. Nakada, M. Kikuchi, Z. Saghi, J.S. Barnard, and P.A. Midgley: Scripta Mater., 2011, vol. 65, pp. 509–12.10.1016/j.scriptamat.2011.06.010 ↗
7. Y. Gao, C. Zhang, X. Xiong, Z. Zheng, and M. Zhu: Eng. Fail. Anal., 2012, vol. 24, pp. 26–32.10.1016/j.engfailanal.2012.03.004 ↗
8. A. Yae Kina, V.M. Souza, S.S.M. Tavares, J.M. Pardal, and J.A. Souza: Mater. Charact., 2008, vol. 59, pp. 651–55.10.1016/j.matchar.2007.04.004 ↗
9. A. Yazdanpanah, L. Pezzato and M. Dabalà, Engineering Failure Analysis 2022, vol. 142.10.1016/j.engfailanal.2022.106797 ↗
10. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–41.10.1016/S1359-6454(02)00064-2 ↗
11. S. Kobayashi, R. Kobayashi, and T. Watanabe: Acta Mater., 2016, vol. 102, pp. 397–405.10.1016/j.actamat.2015.08.075 ↗
12. Hu. Changliang, S. Xia, H. Li, T. Liu, B. Zhou, W. Chen, and N. Wang: Corros. Sci., 2011, vol. 53, pp. 1880–86.10.1016/j.corsci.2011.02.005 ↗
13. P. Ganesh, A.V. Kumar, C. Thinaharan, N.G. Krishna, R.P. George, N. Parvathavarthini, S.K. Rai, R. Kaul, U.K. Mudali, and L.M. Kukreja: Surf. Coat. Technol., 2013, vol. 232, pp. 920–27.10.1016/j.surfcoat.2013.06.124 ↗
14. A.Y. Chen, W.F. Hu, D. Wang, Y.K. Zhu, P. Wang, J.H. Yang, X.Y. Wang, J.F. Gu, and J. Lu: Scripta Mater., 2017, vol. 130, pp. 264–68.10.1016/j.scriptamat.2016.11.032 ↗
15. Q. Zhou, S. Ping, X. Meng, R. Wang, and Y. Gao: J. Mater. Eng. Perform., 2017, vol. 26, pp. 6130–39.10.1007/s11665-017-2982-2 ↗
16. M. Hillert and R. Lagneborg: J. Mater. Sci., 1971, vol. 6, pp. 208–12.10.1007/BF00550014 ↗
17. S. Kolli, V. Javaheri, J. Komi, and D. Porter: Metals, 2019, vol. 9, p. 1.10.3390/met9111193 ↗
18. H. Agrawal, P. Sharma, P. Tiwari, R.V. Taiwade, and R.K. Dayal: Trans. Indian Inst. Met., 2015, vol. 68, pp. 501–11.10.1007/s12666-014-0467-7 ↗
19. R. Singh, B. Ravikumar, A. Kumar, P.K. Dey, and I. Chattoraj: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2441–47.10.1007/s11661-003-0004-5 ↗
20. R.V. Taiwade, R. Shukla, H. Vashishtha, A.V. Ingle, and R.K. Dayal: ISIJ Int., 2013, vol. 53, pp. 2206–12.10.2355/isijinternational.53.2206 ↗
21. R. Wang, Z. Zheng, Q. Zhou, and Y. Gao: Corros. Sci., 2016, vol. 111, pp. 728–41.10.1016/j.corsci.2016.06.012 ↗
22. H. Liu, Y. Wei, C.K.I. Tan, D.T. Ardi, D.C.C. Tan, and C.J.J. Lee: Mater. Charact., 2020, vol. 168, p. 1.10.1016/j.matchar.2020.110574 ↗
23. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514–22.10.1016/j.msea.2012.05.080 ↗
24. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 4210–16.10.1007/s11661-016-3589-1 ↗
25. R. Pippan, S. Scheriau, A. Taylor, M. Hafok, A. Hohenwarter, and A. Bachmaier: Annu. Rev. Mater. Res., 2010, vol. 40, pp. 319–43.10.1146/annurev-matsci-070909-104445 ↗
26. R. Wang, Q. Zhou, Z. Zheng, and Y. Gao: Corros. Sci., 2018, vol. 143, pp. 390–402.10.1016/j.corsci.2018.08.026 ↗
27. Q. Zhou, J. Liu, and Y. Gao: Mater. Des., 2019, vol. 181, p. 1.
28. Q. Zhou, R. Wang, Z. Zheng, and Y. Gao: Appl. Surf. Sci., 2018, vol. 462, pp. 804–14.10.1016/j.apsusc.2018.08.097 ↗
29. E.O. Hall and S.H. Algie: Metall. Rev., 1966, vol. 11, pp. 61–88.10.1179/imr.1966.11.1.61 ↗
30. A. Bahrami and A. Ashrafi: Eng. Fail. Anal., 2017, vol. 82, pp. 56–63.10.1016/j.engfailanal.2017.08.027 ↗
31. H. Gleiter: Acta Mater., 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
32. G. Palumbo, S.J. Thorpe, and K.T. Aust: Scr. Metall. Mater., 1990, vol. 24, pp. 1347–50.10.1016/0956-716X(90)90354-J ↗
33. Y. Cao, Y.B. Wang, X.H. An, X.Z. Liao, M. Kawasaki, S.P. Ringer, T.G. Langdon, and Y.T. Zhu: Acta Mater., 2014, vol. 63, pp. 16–29.10.1016/j.actamat.2013.09.030 ↗
34. Li. Liu, Y. Li, and F. Wang: J. Mater. Sci. Technol., 2010, vol. 26, pp. 1–4.10.1016/S1005-0302(10)60001-1 ↗
35. Z.J. Zheng, Y. Gao, Y. Gui, and M. Zhu: Corros. Sci., 2012, vol. 54, pp. 60–67.10.1016/j.corsci.2011.08.049 ↗
36. C. Pan, L. Liu, Y. Li, B. Zhang, and F. Wang: J. Electrochem. Soc., 2012, vol. 159, pp. C453–60.10.1149/2.034211jes ↗
37. Lv. Jinlong and L. Hongyun: Mater. Sci. Eng. C, 2014, vol. 34, pp. 484–90.10.1016/j.msec.2013.10.003 ↗
38. Yu. Xingguo Feng, Y.T. Zuo, X. Zhao, and J. Zhao: Corros. Sci., 2012, vol. 65, pp. 542–48.10.1016/j.corsci.2012.08.060 ↗
39. Lv. Jinlong, G. Wenli, and L. Tongxiang: J. Alloy. Compd., 2016, vol. 686, pp. 176–83.10.1016/j.jallcom.2016.06.003 ↗
40. T. Balusamy, T.S.N.S. Narayanan, K. Ravichandran, S. Park, and M.H. Lee: Corros. Sci., 2013, vol. 74, pp. 332–44.10.1016/j.corsci.2013.04.056 ↗
41. K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, pp. 0750051–7500513.10.5006/1.3462912 ↗
42. H.Y. Miao, D. Demers, S. Larose, C. Perron, and M. Lévesque: J. Mater. Process. Technol., 2010, vol. 210, pp. 2089–2102.10.1016/j.jmatprotec.2010.07.016 ↗
43. V. Cihal and R. Stefec: Electrochim. Acta, 2001, vol. 46, pp. 3867–77.10.1016/S0013-4686(01)00674-0 ↗
44. H.-J. Kim, S.-H. Jeon, S.-T. Kim, I.-S. Lee, Y.-S. Park, K.-T. Kim, and Y.-S. Kim: Corros. Sci., 2014, vol. 87, pp. 60–70.10.1016/j.corsci.2014.06.005 ↗
45. Q. Pan, H. Zhou, Lu. Qiuhong, H. Gao, and Lu. Lei: Nature, 2017, vol. 551, pp. 214–17.10.1038/nature24266 ↗
46. H. Van Swygenhoven, D. Farkas, and A. Caro: Phys. Rev. B, 2000, vol. 62, pp. 831–38.10.1103/PhysRevB.62.831 ↗
47. K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431–37.10.2355/isijinternational.31.1431 ↗
48. R.K. Wang, Z.J. Zheng, and Y. Gao: J. Mater. Eng. Perform., 2015, vol. 25, pp. 20–28.10.1007/s11665-015-1806-5 ↗
49. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
50. K. Lu: Nat. Rev. Mater., 2016, vol. 1, p. 1.10.1038/natrevmats.2016.19 ↗