Constitutive Flow Equation for Cast Austenite–Ferrite Stainless Steels
Source abstract
Abstract
Cast duplex (austenite–ferrite) stainless steels are important materials in many domains. Their mechanical properties are altered by thermal aging. The demonstration of the mechanical integrity requires the assessment of the mechanical behavior before and after aging. In this work, we focus on the identification of the relevant microstructure parameters controlling the behavior of the unaged materials, which allows later to track the effect of aging temperature and time on these parameters. We propose an analytical flow equation obtained by integration of the Kocks–Mecking constitutive equations in ferrite and in austenite. The macroscopic behavior is assumed to obey a simple mixture rule of the two phases weighted by their respective volume fractions. The close agreement with many tensile curves, obtained at different temperatures on different duplex steels, suggests that the behavior of the unaged cast Duplex stainless steels is determined only by the volume fraction of ferrite, with no significant effect of the chemical composition.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. I. Alvarez-Armas and S. Degallaix-Moreuil: Duplex Stainless Steels, ISTE Ltd., London, 2009.
2. R. Gunn: Duplex Stainless Steels: Microstructure, Properties and Applications, 1st ed. Woodhead Publishing, Sawston, 1997.10.1533/9781845698775 ↗
3. B. Verhaeghe, F. Louchet, B. Doisneau-Cottignies, Y. Bréchet, and J.-P. Massoud: Micromechanisms of deformation of an austenoferritic duplex stainless steel. Philos. Mag. A, 1997, vol. 76, pp. 1079–91.10.1080/01418619708200016 ↗
4. W. Zieliński, W. Świątnicki, M. Barstch, and U. Messerschmidt: Non-uniform distribution of plastic strain in duplex steel during TEM in situ deformation. Mater. Chem. Phys., 2003, vol. 81, pp. 476–79. https://doi.org/10.1016/S0254-0584(03)00059-2.10.1016/S0254-0584(03)00059-2 ↗
5. C. Pareige, S. Novy, S. Saillet, and P. Pareige: Study of phase transformation and mechanical properties evolution of duplex stainless steels after long term thermal ageing (> 20 years). J. Nucl. Mater., 2011, vol. 411, pp. 90–96.10.1016/j.jnucmat.2011.01.036 ↗
6. S. Chen, Y. Miyahara, A. Nomoto, and K. Nishida: Effects of thermal aging and low-fluence neutron irradiation on the mechanical property and microstructure of ferrite in cast austenitic stainless steels. Acta Mater., 2019, vol. 179, pp. 61–69. https://doi.org/10.1016/j.actamat.2019.08.029.10.1016/j.actamat.2019.08.029 ↗
7. S. Küchler, V. Vojtech, S.S.A. Gerstl, R.E. Schäublin, and J.F. Löffler: Thermally decomposed binary Fe–Cr alloys: toward a quantitative relationship between strength and structure. Adv. Eng. Mater., 2022, vol. 24, p. 2100909. https://doi.org/10.1002/adem.202100909.10.1002/adem.202100909 ↗
8. R. Badyka, S. Saillet, C. Domain, G. Monnet, and C. Pareige: Hardening contribution of G-phase nanoparticle precipitation and spinodal decomposition in aged duplex stainless steel studied by APT analysis and micro-hardness of ferrite. Microsc. Microanal., 2018, vol. 24, pp. 2210–11. https://doi.org/10.1017/S1431927618011534.10.1017/S1431927618011534 ↗
9. S. Li, Y. Wang, and X. Wang: In situ observation of the deformation and fracture behaviors of long-term thermally aged cast duplex stainless steels. Metals, 2019, vol. 9, p. 258. https://doi.org/10.3390/met9020258.10.3390/met9020258 ↗
10. T.S. Byun, D.A. Collins, T.G. Lach, and E.L. Carter: Degradation of impact toughness in cast stainless steels during long-term thermal aging. J. Nucl. Mater., 2020, vol. 542, 152524. https://doi.org/10.1016/j.jnucmat.2020.152524.10.1016/j.jnucmat.2020.152524 ↗
11. Y. Fan, T.G. Liu, L. Xin, Y.M. Han, Y.H. Lu, and T. Shoji: Thermal aging behaviors of duplex stainless steels used in nuclear power plant: a review. J. Nucl. Mater., 2021, vol. 544, 152693. https://doi.org/10.1016/j.jnucmat.2020.152693.10.1016/j.jnucmat.2020.152693 ↗
12. G. Monnet and V. Ludovic: Dislocation-dynamics based crystal plasticity law for the low- and high-temperature deformation regimes of bcc crystal. Acta Mater., 2013, vol. 61, pp. 6178–90.10.1016/j.actamat.2013.07.002 ↗
13. H. Mecking and U.F. Kocks: Kinetics of flow and strain-hardening. Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
14. U.F. Kocks and H. Mecking: Physics and phenomenology of strain hardening: the FCC case. Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
15. G. Cailletaud, Une approche micromécanique phénoménologique du comportement inélastique des métaux, thesis, Paris 6, 1987. http://www.theses.fr/1987PA066291
16. L. Méric, P. Poubanne, and G. Cailletaud: Single crystal modeling for structural calculations: Part 1—model presentation. J. Eng. Mater. Technol., 1991, vol. 113, pp. 162–70. https://doi.org/10.1115/1.2903374.10.1115/1.2903374 ↗
17. R. Rodriguez and I. Gutierrez: Unified formulation to predict the tensile curves of steels with different microstructures. Mater. Sci. Forum, 2003, vol. 426, pp. 4525–30.10.4028/www.scientific.net/MSF.426-432.4525 ↗
18. J. GilSevillano: The cold worked state. Mater. Sci. Forum, 1993, vol. 113–115, pp. 19–28. https://doi.org/10.4028/www.scientific.net/MSF.113-115.19.10.4028/www.scientific.net/MSF.113-115.19 ↗
19. U.F. Kocks: The relation between polycrystal deformation and single-crystal deformation. Metall. Mater. Trans. B, 1970, vol. 1B, pp. 1121–43.10.1007/BF02900224 ↗
20. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
21. G. Sachs: Plasticity problems in metals. Trans. Faraday Soc., 1928, vol. 24, pp. 84–92. https://doi.org/10.1039/TF9282400084.10.1039/TF9282400084 ↗
22. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, 2000.
23. M.F. Ashby: The deformation of plastically non-homogeneous materials. Philos. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
24. L.-E. Lindgren, K. Domkin, and S. Hansson: Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L. Mech. Mater., 2008, vol. 40, pp. 907–19. https://doi.org/10.1016/j.mechmat.2008.05.005.10.1016/j.mechmat.2008.05.005 ↗
25. X. Zhang, P. Wang, D. Li, and Y. Li: Multi-scale study on the heterogeneous deformation behavior in duplex stainless steel. J. Mater. Sci. Technol., 2021, vol. 72, pp. 180–88. https://doi.org/10.1016/j.jmst.2020.09.023.10.1016/j.jmst.2020.09.023 ↗
26. G. Martin, D. Caldemaison, M. Bornert, C. Pinna, Y. Bréchet, M. Véron, J.D. Mithieux, and T. Pardoen: Characterization of the high temperature strain partitioning in duplex steels. Exp. Mech., 2013, vol. 53, pp. 205–15. https://doi.org/10.1007/s11340-012-9628-y.10.1007/s11340-012-9628-y ↗
27. G. Monnet: Multiscale modeling of irradiation hardening: application to important nuclear materials. J. Nucl. Mater., 2018, vol. 508, pp. 609–27. https://doi.org/10.1016/j.jnucmat.2018.06.020.10.1016/j.jnucmat.2018.06.020 ↗
28. U. Essmann and H. Mughrabi: Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities. Philos. Mag. A, 1979, vol. 40, pp. 731–56. https://doi.org/10.1080/01418617908234871.10.1080/01418617908234871 ↗
29. E. Plancher, Mesures de champs de déformations élastique et totale pour la détermination du comportement mécanique local de matériaux cristallins., phdthesis, Ecole nationale supérieure d’arts et métiers - ENSAM, 2015.
30. G. Monnet and D. Terentyev: Structure and mobility of the edge dislocation in BCC iron studied by molecular dynamics. Acta Mater., 2009, vol. 57, pp. 1416–26.10.1016/j.actamat.2008.11.030 ↗
31. C. Kahloun, G. Monnet, S. Queyreau, L.T. Le, and P. Franciosi: A comparison of collective dislocation motion from single slip quantitative topographic analysis during in-situ AFM room temperature tensile tests on Cu and Feα crystals. Int. J. Plast, 2016, https://doi.org/10.1016/j.ijplas.2016.06.002.10.1016/j.ijplas.2016.06.002 ↗
32. S. Allain and O. Bouaziz: Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening. Mater. Sci. Eng. A, 2008, vol. 496, pp. 329–36.10.1016/j.msea.2008.06.009 ↗
33. G. Monnet and C. Mai: Prediction of irradiation hardening in austenitic stainless steels: analytical and crystal plasticity studies. J. Nucl. Mater., 2019, vol. 518, pp. 316–25. https://doi.org/10.1016/j.jnucmat.2019.03.001.10.1016/j.jnucmat.2019.03.001 ↗
34. X. Feaugas: On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress. Acta Mater., 1999, vol. 47, pp. 3617–32.10.1016/S1359-6454(99)00222-0 ↗
35. O. Bouaziz and P. Buessler: Mechanical behaviour of multiphase materials: an intermediate mixture law without fitting parameter. Revue de Métallurgie, 2002, vol. 99, pp. 71–77.10.1051/metal:2002182 ↗
36. O. Bouaziz and P. Buessler: ISO-work increment assumption for heterogeneous material behaviour modelling. Adv. Eng. Mater., 2004, vol. 6, pp. 79–83.10.1002/adem.200300524 ↗
37. G. Monnet, L. Vincent, and L. Gélébart: Multiscale modeling of crystal plasticity in reactor pressure vessel steels: prediction of irradiation hardening. J. Nucl. Mater., 2019, vol. 514, pp. 128–38.10.1016/j.jnucmat.2018.11.028 ↗
38. G. Ghosh and G.B. Olson: The isotropic shear modulus of multicomponent Fe-base solid solutions. Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
39. RCC-M, AFCEN. (n.d.). https://www.afcen.com/en/rcc-m/194-rcc-m.html (accessed February 17, 2022).
40. L. Kubin, B. Devincre, and T. Hoc: Modeling dislocation storage rates and mean free paths in face-centered cubic crystals. Acta Mater., 2008, vol. 56, pp. 6040–49. https://doi.org/10.1016/j.actamat.2008.08.012.10.1016/j.actamat.2008.08.012 ↗
41. B. Devincre, T. Hoc, and L. Kubin: Dislocation mean free paths and strain hardening of crystals. Science, 2008, vol. 320, pp. 1745–48.10.1126/science.1156101 ↗
42. S. Haouala, J. Segurado, and J. Lorca: An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization. Acta Mater., 2018, vol. 148, pp. 72–85.10.1016/j.actamat.2018.01.024 ↗
43. K.K. Singh: Strain hardening behaviour of 316L austenitic stainless steel. Mater. Sci. Technol., 2004, vol. 20, pp. 1134–42.10.1179/026708304225022089 ↗
44. M. Matijasevic and A. Almazouzi: Effect of Cr on the mechanical properties and microstructure of Fe–Cr model alloys after n-irradiation. J. Nucl. Mater., 2008, vol. 377, pp. 147–54.10.1016/j.jnucmat.2008.02.061 ↗
45. E.-Y. Guo, H.-X. Xie, S.S. Singh, A. Kirubanandham, T. Jing, and N. Chawla: Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression. Mater. Sci. Eng. A, 2014, vol. 598, pp. 98–105. https://doi.org/10.1016/j.msea.2014.01.002.10.1016/j.msea.2014.01.002 ↗
46. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Sample dimensions influence strength and crystal plasticity. Science, 2004, vol. 305, pp. 986–89. https://doi.org/10.1126/science.1098993.10.1126/science.1098993 ↗
47. H. Yilmaz, C.J. Williams, and B. Derby: Size effects on strength and plasticity of ferrite and austenite pillars in a duplex stainless steel. Mater. Sci. Eng. A, 2020, vol. 793, 139883. https://doi.org/10.1016/j.msea.2020.139883.10.1016/j.msea.2020.139883 ↗
48. B.P. Kashyap, K. McTaggart, and K. Tangri: Study on the substructure evolution and flow behaviour in type 316L stainless steel over the temperature range 21–900 °C. Philos. Mag. A, 1988, vol. 57, pp. 97–114. https://doi.org/10.1080/01418618808204501.10.1080/01418618808204501 ↗
49. C.W. Li, L.Z. Han, X.M. Luo, Q.D. Liu, and J.F. Gu: Effect of tempering temperature on the microstructure and mechanical properties of a reactor pressure vessel steel. J. Nucl. Mater., 2016, vol. 477, pp. 246–56. https://doi.org/10.1016/j.jnucmat.2016.05.017.10.1016/j.jnucmat.2016.05.017 ↗
50. I. Serre, D. Salazar, and J.B. Vogt: Plastic deformation quantified by atomic force microscopy measurements for duplex stainless steel under monotonic and cyclic loading. Appl. Mech. Mater., 2008, vol. 13–14, pp. 163–72. https://doi.org/10.4028/www.scientific.net/AMM.13-14.163.10.4028/www.scientific.net/AMM.13-14.163 ↗
51. M. N. Shiekhelsouka, O. Lorraina, V. Faviera, K. Inalb, S. Migotc, O. Bouazizd, M. Cherkaoui. Etudedu comportement mécanique d’aciers duplex Fe-Mn-Al-C. MATERIAUX 2006 13–17 Novembre 2006 – Dijon, France.
52. P. Hedström, T.-S. Han, U. Lienert, J. Almer, and M. Odén: Load partitioning between single bulk grains in a two-phase duplex stainless steel during tensile loading. Acta Mater., 2010, vol. 58, pp. 734–44. https://doi.org/10.1016/j.actamat.2009.09.053.10.1016/j.actamat.2009.09.053 ↗
53. J.D. Eshelby, F.C. Frank, and F.R.N. Nabarro: XLI. The equilibrium of linear arrays of dislocations. Lond Edinburgh Dublin Philos Mag J Sci, 1951, vol. 42, pp. 351–64. https://doi.org/10.1080/14786445108561060.10.1080/14786445108561060 ↗
54. E.O. Hall: The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. B, 1951, vol. 64, p. 747. https://doi.org/10.1088/0370-1301/64/9/303.10.1088/0370-1301/64/9/303 ↗
55. C. Örnek and D.L. Engelberg: An experimental investigation into strain and stress partitioning of duplex stainless steel using digital image correlation, X-ray diffraction and scanning Kelvin probe force microscopy. J. Strain Anal. Eng. Des., 2016, vol. 51, pp. 207–19. https://doi.org/10.1177/0309324716631669.10.1177/0309324716631669 ↗