Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation
Source abstract
Abstract
The efficiency of power dissipation (η) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot working conditions at which dynamic recrystallization (DRX) is dominant. However, predicting the quantitative value of the DRX fraction (XDRX) from η remains a challenge. In this paper, a constitutive equation is proposed to quantitatively predict XDRX using η. The proposed equation for describing XDRX is derived from the reaction rate equation using the assumption that the DRX rate depends on η. The proposed equation is verified via hot compression tests of equiaxed Ti–6Al–4V ELI alloys (Ti-64) in the (α + β) region. The predicted and experimental XDRX values are found to be generally consistent with one another, exhibiting an average absolute error of 0.05. Furthermore, the proposed equation provides the same level of prediction accuracy as the conventional Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation. Therefore, the proposed equation can be used to quantitatively predict XDRX following hot compression tests of equiaxed Ti-64. Moreover, compared with the JMAK equation, the proposed equation is expressed in fewer parameters and constant terms. It is, thus, expected to facilitate the quantitative prediction of XDRX.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. J. Jeswiet, M. Geiger, U. Engel, M. Kleiner, M. Schikorra, J. Duflou, R. Neugebauer, P. Bariani, and S. Bruschi: CIRP JMST., 2008, vol. 1, pp. 2–17.
2. F. Chen, Z. Cui, and J. Chen: Manuf. Rev., 2014, vol. 1(6), pp. 1–21.
3. K. Huang and R.E. Loge: Mater. Des., 2016, vol. 111, pp. 548–74.10.1016/j.matdes.2016.09.012 ↗
4. C.M. Sellars: Mater. Sci. Technol., 1990, vol. 6, pp. 1072–81.10.1179/mst.1990.6.11.1072 ↗
5. C. Zener and J.H. Hollomon: J. Appl. Phys., 1994, vol. 15, pp. 22–32.10.1063/1.1707363 ↗
6. C.M. Sellars and J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–94.10.1179/msc.1979.13.3-4.187 ↗
7. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st ed. Pergamon Press, Oxford, 1995, pp. 188–95.
8. H. Matsumoto and V. Velay: J. Alloys Compd., 2017, vol. 708, pp. 404–13.10.1016/j.jallcom.2017.02.285 ↗
9. A. Laasraoui and J.J. Jonas: Metall. Trans. A., 1991, vol. 22A, pp. 151–60.10.1007/BF03350957 ↗
10. S.I. Kim, Y. Lee, D.L. Lee, and Y.C. Yoo: Mater. Sci. Eng. A, 2003, vol. 355, pp. 384–93.10.1016/S0921-5093(03)00104-7 ↗
11. H.S. Jeong, J.R. Cho, and H.C. Park: J. Mater. Process. Technol., 2005, vol. 162–163, pp. 504–11.10.1016/j.jmatprotec.2005.02.101 ↗
12. D. Xu, M. Zhu, Z. Tang, and C. Sun: J. Wuhan Univ. Technol. Mat. Sci., 2013, vol. 28, pp. 819–24.10.1007/s11595-013-0775-5 ↗
13. G.Z. Quan, G.C. Luo, J.T. Liang, D.S. Wu, A. Mao, and Q. Liu: Comput. Mater. Sci., 2015, vol. 97, pp. 136–47.10.1016/j.commatsci.2014.10.009 ↗
14. G.Z. Quan, D.S. Wu, G.C. Luo, Y.F. Xia, J. Zhou, Q. Liu, and L. Gao: Mater. Sci. Eng. A., 2014, vol. 589, pp. 23–33.10.1016/j.msea.2013.09.069 ↗
15. S.M. Abbasi, A. Momeni, Y.C. Lin, and H.R. Jafarian: Mater. Sci. Eng. A, 2016, vol. 665, pp. 154–60.10.1016/j.msea.2016.04.040 ↗
16. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
17. Y.V.R.K. Prasad and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
18. A. Lukaszek-Solek, J. Krawczyk, T. Sleboda, and J. Grelowski: J. Mater. Res. Technol., 2019, vol. 8, pp. 3281–90.10.1016/j.jmrt.2019.05.018 ↗
19. S. Venugopal, M. Vasudevan, S. Venugopal, P.V. Sivaprasad, S.K. Jha, P. Pandey, S.L. Mannan, and Y.V.R.K. Prasad: Mater. Sci. Technol., 1996, vol. 12, pp. 955–62.10.1179/mst.1996.12.11.955 ↗
20. F.L. Sui, L.X. Xu, L.Q. Chen, and X.H. Liu: J. Mater. Process. Technol., 2011, vol. 211, pp. 433–40.10.1016/j.jmatprotec.2010.10.015 ↗
21. Y. Yamashita, Y. Li, H. Matsumoto, Y. Koizumi, and A. Chiba: Mater. Trans., 2011, vol. 52, pp. 780–86.10.2320/matertrans.M2010388 ↗
22. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2000, vol. 284, pp. 184–94.10.1016/S0921-5093(00)00741-3 ↗
23. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp. 112–25.10.1016/S0921-5093(01)01448-4 ↗
24. Y.V.R.K. Prasad, T. Seshacharyulu, S.C. Medeiros, and W.G. Frazier: J. Mater. Process. Technol., 2001, vol. 108, pp. 320–27.10.1016/S0924-0136(00)00832-3 ↗
25. N.K. Park, J.T. Yeom, and Y.S. Na: J. Mater. Process. Technol., 2002, vol. 130–131, pp. 540–45.10.1016/S0924-0136(02)00801-4 ↗
26. J. Luo, P. Ye, M.Q. Li, and L.Y. Liu: Mater. Des., 2015, vol. 88, pp. 32–40.10.1016/j.matdes.2015.08.130 ↗
27. C. Wert and C. Zener: J. Appl. Phys., 1950, vol. 21, pp. 5–8.10.1063/1.1699422 ↗
28. P. Atkins, J. de Paula, and J. Keeler: Atkins’ Physical chemistry, 11th ed. Oxford University Press, Oxford, 2018, pp. 731–33, 787–89.
29. Y.P. Li, E. Onodera, H. Matsumoto, Y. Koizumi, S. Yu, and A. Chiba: ISIJ Int., 2011, vol. 51, pp. 782–87.10.2355/isijinternational.51.782 ↗
30. Y.P. Li, E. Onodera, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 982–90.10.1007/s11661-009-9783-7 ↗
31. M.C. Mataya and V.E. Sackschewsky: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2737–52.10.1007/BF02649226 ↗
32. Y.P. Li, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1203–09.10.1007/s11661-009-9811-7 ↗
33. H. Matsumoto, L. Bin, S.H. Lee, Y. Li, Y. Ono, and A. Chiba: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3245–60.10.1007/s11661-013-1655-5 ↗
34. T. Furu, K. Marthinsen, and E. Nes: Mater. Sci. Technol., 1990, vol. 6, pp. 1093–1102.10.1179/mst.1990.6.11.1093 ↗
35. H. Rottenberg: Biophys. J., 1973, vol. 13, pp. 503–11.10.1016/S0006-3495(73)86004-7 ↗
36. I. Weiss, F.H. Froes, D. Eylon, and G.E. Welsch: Metall. Trans. A, 1986, vol. 17A, pp. 1935–47.10.1007/BF02644991 ↗
37. Q. Chao, P.D. Hodgson, and H. Beladi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2659–71.10.1007/s11661-014-2205-5 ↗
38. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685–99.10.1016/S1359-6454(03)00078-8 ↗
39. L.S. Toth, Y. Estrin, R. Lapovok, and C. Gu: Acta Mater., 2010, vol. 58, pp. 1782–94.10.1016/j.actamat.2009.11.020 ↗