A Computational Study of the Mass Transport Behavior of Hydrogen in In-Service Carbon Steel Pipeline Fillet Welds During Deposition and Desorption
Source abstract
Abstract
Numerical calculations were used to study the diffusion and thermotransport of hydrogen during deposition and diffusion of hydrogen during desorption of in-service carbon steel pipeline fillet welds prone to hydrogen cracking. During deposition, only a small amount of hydrogen migrates into the HAZ and little migrates into the pipe. Thermotransport decreases the hydrogen concentration in the HAZ and regions of the weld closer to the HAZ, and increases the concentration toward the outer edge of the weld. This effect increases the rate of desorption of hydrogen from the weld, which increases with weld size/pipe wall thickness. The activation energy for desorption varies with the fraction of hydrogen removed and appears to be a function of the activation energy for diffusion and mass fraction of hydrogen in the weld, HAZ, and pipe. The differences in the desorption rate due to thermotransport appear to be due to differences in the activation energy for desorption and hydrogen concentration gradients. Maintaining a 121 °C preheat/interpass temperature during welding significantly reduces post-weld heating times necessary to reach hydrogen levels considered to be safe from hydrogen cracking. Calculated results and experimental results from another study show good agreement for desorption at 132 °C for up to 30 minutes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. W.A. Bruce: Proceedings of IPC’02 4th International Pipeline Conference, ASME, 2002, IPC2002-27131.
2. W.A. Bruce, B.C. Etheridge, V.R. Arnette, A. Carman, D. Nolan: Report No. ENAUS826BRUCE, DNV Columbus, Inc., Dublin, OH, 2009, pp. B-5.
3. 3. R. Pargeter: Weld. J., 2003, vol. 82, pp. 321s-29s.
4. C.E. Jaske, B.O. Hart and W.A. Bruce: Pipeline Repair Manual, Final Report R2269-01R, Pipeline Research Council International, Inc., Arlington, Virginia, 2006, Rev 6, pp. A41–49.
5. 5. Michael Smialowski: Hydrogen in Steel: Effect of Hydrogen on Iron and Steel During Production, Fabrication and Use, Pergamon Press, 1962, pp. 64-130.10.1016/B978-0-08-009697-1.50007-7 ↗
6. 6. Michael Smialowski: Hydrogen in Steel: Effect of Hydrogen on Iron and Steel During Production, Fabrication and Use, Pergamon Press, 1962, pp. 99.
7. 7. A.J. Haq, K. Muzaka, D.P. Dunne, A. Calka, and E.V. Pereloma: Int. J. Hydrog. Energy, 2013, vol. 38, pp. 2544-2556.10.1016/j.ijhydene.2012.11.127 ↗
8. 8. G.T. Park, S.U. Koh, H.G. Jung, and K.Y. Kim: Corros. Sci., 2008, vol. 50, pp. 1865-71.10.1016/j.corsci.2008.03.007 ↗
9. M. Skjellerudsveen, O.M. Akselsen, V. Olden, R. Johnsen, and A. Smirnova: Proceedings of the 2010 EUROCORR Conference, Moscow, Russia, 2010, pp. 1029–41.
10. 10. H.B. Xue and Y.F. Cheng: Corros. Sci., 2011, vol. 53, pp. 1201-08.10.1016/j.corsci.2010.12.011 ↗
11. 11. Y. Sakamoto and T Mantani: Trans. JIM, 1976, vol. 17, pp. 743-48.10.2320/matertrans1960.17.743 ↗
12. 12. R. Valentini and A Salina: Mater. Sci. Technol., 1994, vol. 10, pp. 908-14.10.1179/mst.1994.10.10.908 ↗
13. 13. K. Kiuchi and R.B. McLellan: Acta. Metall., 1983, vol. 31, pp. 961-84.10.1016/0001-6160(83)90192-X ↗
14. H. Hagi: Mater. Tran. JIM, 1992, vol. 33, pp. 472-79.10.2320/matertrans1989.33.472 ↗
15. 15. A.S. Kholtobina, R. Pippan, L. Romaner, D. Sheiber, W. Ecker and V.I. Razumovskiy: Materials, 2020, vol. 13, pp. 2228.10.3390/ma13102288 ↗
16. T.S. Ke: in Perspectives in Hydrogen in Metals, M.F. Ashby and J.P. Hirth, eds., Pergamon Press, 1986, pp. 271–78.
17. 17. R. Gibala: Trans. TMS-AIME, 1967, vol. 239, pp. 1574-1585.
18. 18. W.Y. Choo and J.Y. Lee: Metall. Trans. A, 1982, vol. 13, pp. 135-40.10.1007/BF02642424 ↗
19. 19. A.J. Kumnick and H.H. Johnson: Acta. Metall., 1980, vol. 28, pp. 33-39.10.1016/0001-6160(80)90038-3 ↗
20. 20. R.A. Oriani: Acta. Metall., 1970, vol. 18, pp. 147-57.10.1016/0001-6160(70)90078-7 ↗
21. 21. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861-90.10.1007/BF02654700 ↗
22. Y. Jagodzinski, A. Tarasenko, S. Smuk, S. Tahtinen, and H. Hanninen: J. Nucl. Mater., 1999, vol. 275, pp. 47-55.10.1016/S0022-3115(99)00099-9 ↗
23. 23. J.L. Lee and J.Y. Lee: Met. Sci. J., 1983, vol. 17, pp. 426-32.10.1179/030634583790420619 ↗
24. 24. F.G. Wei and K. Tsuzaki: Scr. Mater., 2005, vol. 52, pp. 467-72.10.1016/j.scriptamat.2004.11.008 ↗
25. F.G. Wei and K. Tsuzaki: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, UK, 2012, pp. 493–525.10.1533/9780857093899.3.493 ↗
26. T. Hehenkamp: in Electro- and Thermo-transport in Metals and Alloys, R.E. Hummel and H.B. Huntington, eds., AIME, New York, NY, 1977, pp. 68–92.
27. H. Wipf: in Hydrogen in Metals II: Topics in Applied Physics, G. Alefeld and J. Volkl, eds., Springer, Berlin, Heidelberg, 1978, vol 29, pp. 273–304.10.1007/3-540-08883-0_23 ↗
28. 28. O.D. Gonzalez and R.A. Oriani: Trans. Met. Soc. AIME, 1965, vol. 233, pp. 1878-86.
29. 29. T.W. Eagar and N.-S. Tsai: Weld. J., 1983, vol. 62, pp. 346s-55s.
30. C.S. Wu, J.Q. Gao, X.F. Liu, and Y.H. Zhao: Proc. Instn. Mech. Engrs., Part B: J. Engineering Manufacture, 2003, vol. 217, SC04302.
31. 31. J.W. Hooijmans and G.D. Ouden: Weld. J., 1997, vol. 76, pp. 264s-68s.
32. 32. P.D. Kumar and K. Yu-ichi: Trans. JWRI, 2013, vol. 42, pp. 39-62.
33. 33. I.C.I. Okafor, O.N. Carlson, and D.M. Martin: Metall. Trans. A, 1982, vol. 13A, pp. 1713-19.10.1007/BF02647826 ↗
34. 34. M. Uz, D.K. Rehbein, and O.N. Carlson: Metall. Trans. A, 1986, vol. 17A, pp. 1955-66.10.1007/BF02644993 ↗
35. 35. G.P. Marino: Nucl. Sci. Eng., 1972, vol. 49, pp. 93-98.10.13182/NSE72-A22530 ↗
36. 36. S.C. Axtell and O.N. Carlson: Metall. Trans. A, 1990, vol. 21A, pp. 2141-48.10.1007/BF02647874 ↗
37. G. Schoeck: in Perspectives in Hydrogen in Metals, M.F. Ashby and J.P. Hirth, eds., Pergamon Press, 1986, pp. 279–85.10.1016/B978-0-08-034813-1.50041-3 ↗
38. S. Asano and M. Shibata: in Perspectives in Hydrogen in Metals, M.F. Ashby and J.P. Hirth, eds., Pergamon Press, 1986, pp. 349–52.10.1016/B978-0-08-034813-1.50053-X ↗
39. 39. A. Nagao, M. Dadfarnia, B.P. Somerday, P. Sofronis, R.O. Ritchie: J. Mech. Phys. Solids, 2018, vol. 112, pp. 403-30.10.1016/j.jmps.2017.12.016 ↗
40. Brandes EA, Brook GB (eds) (1992) Smithells Metals Reference Book. Butterworth-Heinemann, Woburn pp. 81.10.1016/B978-0-08-051730-8.50013-3 ↗
41. 41. A.E. Flanigan and E.U. Lee: Weld. J., 1966, vol. 45, pp. 477s-80s.
42. 42. O. Dreibati, R. Ossenbrink, and V. Michailov: Q. J. Jpn. Weld. Soc., 2013, vol. 31, pp. 148s-52s.10.2207/qjjws.31.148s ↗
43. J.F. Lancaster: Metallurgy of Welding. Elsevier, Amsterdam; 1999, pp. 251.10.1533/9781845694869 ↗
44. 44. S. Vyazovkin: Int Rev. Phys. Chem., 2000, vol. 19, pp. 45-60.10.1080/014423500229855 ↗