Effect of Initial Iron Content in a Zinc Bath on the Dissolution Rate of Iron During a Hot Dip Galvanizing Process
Source abstract
Abstract
The mechanism of iron dissolution and the effect of initial Fe content in a Zn bath on the dissolution rate of iron were investigated using a finger rotating method (FRM). When the initial iron content, [Fe]°, in the zinc bath was less than the solubility limit, the iron content in the zinc bath showed a rapid increase, whereas a moderate increase was observed when [Fe]° was close to the solubility limit. Based on Eisenberg’s kinetic model, the mass transfer coefficient of iron in the present experimental condition was calculated to be k M = 1.2 × 10−5 m/s, which was similar to the results derived by Giorgi et al. under industrial practice conditions. A dissolution of iron occurred even when the initial iron content in the zinc bath was greater than the solubility limit, which was explained by the interfacial thermodynamics in conjunction with the morphology of the surface coating layer. By analyzing the diffraction patterns using TEM, the outermost dendritic-structured coating layer was confirmed as FeZn13 (ζ). In order to satisfy the local equilibrium based on the Gibbs–Thomson equation, iron in the dendrite-structured phase spontaneously dissolved into the zinc bath, resulting in the enrichment of iron in front of the dendrite tip. Through the diffusion boundary layer in front of the dendritic-structured layer, dissolved Fe atoms diffused out and reacted with Zn and small amounts of Al, resulting in the formation of dross particles such as FeZn10Al x (δ). It was experimentally confirmed that the smaller the difference between the initial iron content in the zinc bath and the iron solubility limit at a given temperature, the lower the number of formed dross particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Corrosion Behavior and Inhibition · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. N.Y. Tang and G.R. Adams: The Physical Metallurgy of Zinc Coated Steel, A.R. Marder, ed., TMS, Warrendale, PA, 1994, pp. 41–54.
2. A. Taniyama and M. Arai: Mater. Trans., 2004, vol. 45, pp. 2482-85.10.2320/matertrans.45.2482 ↗
3. J. Nakano, D.V. Malakhov, S. Yamaguchi, and G.R. Purdy: Calphad, 2007, vol. 31. pp. 125-40.10.1016/j.calphad.2006.09.003 ↗
4. J.R. McDermid, M.H. Kaye and W.T. Thomson: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 215-30.10.1007/s11663-007-9028-3 ↗
5. J.H. Park, G.H. Park, D.J. Paik, Y. Huh and M.H. Hong: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 195-207.10.1007/s11661-011-0857-y ↗
6. M.L. Giorgi, J.B. Guillot and R. Nicolle: J. Mater. Sci., 2005, vol. 40, pp. 2263-68.10.1007/s10853-005-1944-5 ↗
7. G.M. Michal, D.J. Paik, M.H. Hong and S.H. Park: 8th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steel (GALVATECH ‘11), AIM, Genova, Italy, 2011.
8. Y.H. Liu and N.Y. Tang: 8th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steel Alloy Coated Sheet Steel (GALVATECH ‘11), AIM, Genova, Italy, 2011.
9. P. Toussaint, L. Segers, R. Winand and M. Dubois: 4th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steel (GALVATECH ‘98), ISIJ, Chiba, Japan, 2004.
10. N.Y. Tang: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1699-1704.10.1007/BF02670756 ↗
11. M.L. Giorgi, P. Durighello, R. Nicolle and J.B. Guillot: J. Mater. Sci., 2004, vol. 39, pp. 5803-08.10.1023/B:JMSC.0000040092.27463.45 ↗
12. M.H. Hong, T. Kato and K. Saka: Tetsu-to-Hagane, 1997, vol. 83, pp. 311-16.10.2355/tetsutohagane1955.83.5_311 ↗
13. D.R. Poirier and G.H. Geiger: Transport Phenomena in Materials Processing, TMS, 1998, p. 519.
14. M. Eisenberg, C.W. Tobias and C.R. Wilke: Chemical Engineering Progress Symposium Series, 1955, vol. 21, no. 16, pp. 1.
15. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191-271.10.1016/S0079-6425(98)00006-1 ↗
16. S. Seetharaman: Fundamentals of Metallurgy, Woodhead Publishing Limited, 2005, pp. 250–57.10.1533/9781845690946 ↗
17. www.factsage.com (accessed July 2016).
18. C.W. Bale, E. Belisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.H. Jung, Y.B. Kang, J. Melancon, A.D. Pelton, C. Robelin and S. Petersen: Calphad, 2009, vol. 33, pp. 295-311.10.1016/j.calphad.2008.09.009 ↗