journal article·2024-01

Manipulation of the Stacking Fault Energy of a Medium-Mn Steel Through Temperature and Hierarchical Compositional Variation

D. M. Field, D. J. Magagnosc, B. C. Hornbuckle, J. T. Lloyd, K. R. Limmer

Publisher page

Abstract

Neutron diffraction was used to interrogate the temperature-dependent deformation response of a medium-Mn steel. Through in situ measurements of phase content, the deformation response at 298 K was found to consist of phase transformation of the γ-austenite to ε- and α-martensite (TRIP). When strained above 423 K, twinning-induced plasticity (TWIP) became the dominant deformation behavior. At intermediate temperatures, mixed-mode deformation was observed. The various deformation responses are explained relative to the calculated temperature-dependent stacking fault energy curve. For stacking fault energies ≤ 15 mJ/m2, phase transformation associated with stacking fault generation was observed. When the stacking fault energy was ≥ 22 mJ/m2, twinning was recorded. Between these values, a mixed-mode deformation was noted with both twins and ε-martensite being identified; the mixed-mode response is due to the chemical and microstructural inhomogeneity of the alloy. This investigation works to clarify the effect of temperature on medium-Mn stacking fault energy and the associated deformation responses within a single alloy class.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. G. Frommeyer, U. Brux, and P. Neumann: ISJ Inter., 2003, vol. 43, pp. 438–46.10.2355/isijinternational.43.438 ↗
2. L. Remy and A. Pineau: Mater. Sci. Eng., 1976, vol. 26, pp. 123–32. https://doi.org/10.1016/0025-5416(76)90234-2.10.1016/0025-5416(76)90234-2 ↗
3. S. Allain, J.P. Chateau, and O. Bouaziz: Mater. Sci. Eng., 2004, vol. 387, pp. 143–47.10.1016/j.msea.2004.01.060 ↗
4. T.H. Lee, E. Shin, C.S. Oh, H.Y. Ha, and S.J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–86.10.1016/j.actamat.2010.01.056 ↗
5. D.M. Field, J. Qing, and D.C. Van Aken: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4615–32. https://doi.org/10.1007/s11661-018-4798-6.10.1007/s11661-018-4798-6 ↗
6. G.B. Olson and M. Cohen: Met. Trans. A, 1976, vol. 7, pp. 1897–904.
7. D.J. Magagnosc, D.M. Field, C.S. Meredith, K. An, T.R. Walter, K.R. Limmer, and J.T. Lloyd: Acta Mater., 2022, vol. 231, p. 117864. https://doi.org/10.1016/j.actamat.2022.117864.10.1016/j.actamat.2022.117864 ↗
8. R.P. Reed and R.E. Schramm: J. Appl. Phys., 1974, vol. 45, pp. 4705–11.10.1063/1.1663122 ↗
9. D.M. Field and D.C. Van Aken: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1152–66.10.1007/s11661-018-4481-y ↗
10. M.C. McGrath, D.C. Van Aken, N.I. Medvedeva, and J.E. Medvedeva: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4634–43.10.1007/s11661-013-1820-x ↗
11. D.M. Field, L.G. Garza-Martinez, and D.C. Van Aken: Met Trans A, 2020, vol. 51, pp. 4427–33.10.1007/s11661-020-05901-2 ↗
12. S.T. Pisarik, D.C. Van Aken, K. Limmer, and J.E. Medvedeva: AISTech 2014 Proc., 2014, vol. III, pp. 3013–23.
13. D.C. Van Aken, S.T. Pisarik, and M.C. McGrath: in: Proceedings of the International Symposium on New Developments in Advanced High-Strength Steels (Vail, Colorado, 2013), pp. 119–29.
14. D.M. Field and D.C. Van Aken: Met. Trans. A, 2016, vol. 47A, pp. 1912–17.10.1007/s11661-016-3394-x ↗
15. Y. Ma, W. Song, and W. Bleck: Materials, 2017, vol. 10, p. 1129.10.3390/ma10101129 ↗
16. B. Neding, Y. Tian, J.Y. Peter Ko, and P. Hedström: Mater. Sci. Eng. A, 2022, vol. 832, p. 143403.10.1016/j.msea.2021.142403 ↗
17. B. Neding, O.I. Gorbatov, J.-C. Tseng, and P. Hedström: Metall. Trans. A, 2021, vol. 52, pp. 5357–66.10.1007/s11661-021-06473-5 ↗
18. A. Arabi-Hashemi, E. Polatidis, M. Smid, T. Panzer, and C. Leinenbach: Mat. Sci. Eng. A, 2020, vol. 782, p. 139261.10.1016/j.msea.2020.139261 ↗
19. Y. Tian, S. Lin, J.Y. Peter Ko, U. Lienert, A. Borgenstam, and P. Hedström: Mater. Sci. Eng. A, 2018, vol. 734, pp. 281–90.10.1016/j.msea.2018.07.040 ↗
20. O. Muransky, P. Sittner, J. Zrink, and E.C. Oliver: Acta Mater., 2008, vol. 56, pp. 3367–79.10.1016/j.actamat.2008.03.026 ↗
21. P. Hou, Y. Li, W. Zhang, D. Chae, J.-S. Park, Y. Ren, Y. Gao, et al.: Materialia, 2021, vol. 18, p. 101162.10.1016/j.mtla.2021.101162 ↗
22. S.T. Pisarik and D.C. Van Aken: Metall. Trans. A, 2015, vol. 47, pp. 1009–18.10.1007/s11661-015-3265-x ↗
23. J.T. Lloyd, D.M. Field, and K.R. Limmer: Mater. Design, 2020, https://doi.org/10.1016/j.matdes.2020.108878.10.1016/j.matdes.2020.108878 ↗
24. D.M. Field, D.S. Baker, and D.C. Van Aken: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2150–63.10.1007/s11661-017-4020-2 ↗
25. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–8.10.4028/www.scientific.net/SSP.160.63 ↗
26. D.J. Magagnosc, D.M. Field, C.S. Meredith, T.R. Walter, K.R. Limmer, and J.T. Lloyd: Mater. Sci. Eng. A, 2021, vol. 799, p. 140252. https://doi.org/10.1016/j.msea.2020.140252.10.1016/j.msea.2020.140252 ↗
27. K. An, Y. Chen, and A.D. Stoica: MRS Bull., 2019, vol. 44, pp. 878–85.10.1557/mrs.2019.256 ↗
28. S. Calder, K. An, R. Boehler, C.R. Dela Cruz, M.D. Frontzek, M. Guthrie, B. Haberl, A. Huq, S.A.J. Kimber, J. Liu, J.J. Molaison, J. Neuefeind, K. Page, A.M. Dos Santos, K.M. Taddei, C. Tulk, and M.G. Tucker: Rev. Sci. Instrum., 2018, vol. 89, p. 092701.10.1063/1.5033906 ↗
29. D. Yu, L. Huang, Y. Chen, P. Komolwit, and K. An: JOM, 2018, vol. 70, pp. 1576–615.10.1007/s11837-018-2947-4 ↗
30. B.H. Toby: J. Appl. Crystallogr., 2001, vol. 34, pp. 210–3.10.1107/S0021889801002242 ↗
31. K. An: ORNL Report No. ORNL-TM-2012-621 (2012).
32. S.T. Pisarik and D.C. Van Aken: Metall. Trans. A, 2014, vol. 45, pp. 3173–8.10.1007/s11661-014-2303-4 ↗
33. S. Shin, M. Kwon, W. Cho, I.S. Suh, and B.C. De Cooman: Mater. Sci. Eng., 2017, vol. 683, pp. 187–948.10.1016/j.msea.2016.10.079 ↗
34. A. Creuziger, T. Phan, and D. Pagan: J. Appl. Crystallogr., 2021, vol. 54, pp. 1480–9.10.1107/S1600576721008712 ↗
35. A. Creuziger and T. Gnäupel-Herold: IOP Conf. Ser.: Mater. Sci. Eng., 2015, https://doi.org/10.1088/1757-899X/82/1/012066.10.1088/1757-899X/82/1/012066 ↗
36. M.R. Cox, A. Creuziger, and K.O. Findley: Metall. Trans. A, 2023, vol. 54, pp. 823–37. https://doi.org/10.1007/s11661-022-06931-8.10.1007/s11661-022-06931-8 ↗
37. B.E. Warren: X-ray diffraction, Dover Publications, New York, 2014.
38. D.M. Field, D.J. Magagnosc, B.C. Hornbuckle, J.T. Lloyd, and K.R. Limmer: Metall. Mater. Trans. A, 2022, https://doi.org/10.1007/s11661-022-06683-5.10.1007/s11661-022-06683-5 ↗
39. V.A Athavale, T. Yaniak, M. Xu, and D.C. Van Aken: in: AFS Proceedings of the 123rd Metal Casting Congress, Milwaukee, WI, 25–27 April 2019, pp. 17–58.
40. D.M. Field, J.S. Montgomery, K.R. Limmer, and K.C. Cho: Metall. Trans. A, 2020, vol. 51, pp. 1038–43.10.1007/s11661-019-05599-x ↗
41. D.M. Field, S.R. Cluff, K.R. Limmer, J.S. Monthomery, D.J. Magagnosc, and K.C. Cho: Metals, 2021, vol. 11, p. 723. https://doi.org/10.3390/met11050723.10.3390/met11050723 ↗
42. B.C. De Cooman, Y. Estrin, and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗