journal article·2023-12Open access

Influence of Molybdenum on Rapid Solidification Microstructure and Microsegregation in Primary Ferrite Solidified Stainless Steel

Zachary Arthur Hasenbusch, Greyson Harvill, Katherine Ziska, Andrew Deal, Ben Brown, Laurentiu Nastac, Luke N. Brewer

Abstract

Due to the widespread use and familiarity of austenitic stainless steels (SS) in many industries these alloys are often the first materials used when adapting new processing techniques. The rapid cooling and solidification rates that occur during fusion based additive manufacturing processes like powder bed fusion cause a fundamental shift in the solidification behavior of the material. While the effects that Cr and Ni have on the microstructure have been fairly well documented across a range of solidification conditions, the impact of alloying elements like Mo are not as well understood at rapid solidification rates. For this study, four custom SS alloy feedstocks were made with targeted modification of the Cr and Mo concentrations to maintain a constant Cr/Nieq ratio of ~ 1.7. Two-piston splat quenching was used to produce rapidly solidified samples and the solidification mode, phase, and cell size were investigated. Solidification rates were estimated to be between 0.4 and 1.5 m/s. A comparison of the microsegregation and partitioning behavior of Cr, Ni and Mo in ferrite solidified material was also performed for the different alloy compositions. Variations of the Mo concentration between each feedstock showed no measurable influence on the solidification/cooling rates, solidification morphology, or the partitioning of Mo. However, higher concentrations of Mo were found to significantly increase the amount of ferrite phase in the microstructure by suppressing the ferrite to austenite massive transformation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. ASTM: in ASTM A240 / A240M-20a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM International, West Conshohocken, PA, 2020, p. 13.
2. AISI: Design Guidelines for the Selection and Use of Stainless Steel, Specialty Steel Industry of the United States, Pennsylvania, 1993.
3. A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, and E. Matykina: Corros. Sci., 2008, vol. 50, pp. 780–94.10.1016/j.corsci.2007.11.004 ↗
4. T.D. Anderson, M.J. Perricone, J.N. DuPont, and A.R. Marder: Weld. J., 2007, vol. 86, pp. 281–92.
5. D. Kong, C. Dong, X. Ni, and X. Li: npj Mater Degradation, 2019, vol. 3, pp. 1–4.10.1038/s41529-018-0065-y ↗
6. J.N. DuPont: in ASM Handbook Welding Fundamentals and Processes, T. Lienert, T. Siewert, S. Babu, and V. Acoff, eds., ASM International, Almere, Netherlands, 2011, pp. 96–114.
7. D.M. Wilson: Master of Science, Colorado School of Mines, 2019.
8. W.M. Tucho, V.H. Lysne, H. Austbø, A. Sjolyst-Kverneland, and V. Hansen: J. Alloys Compd., 2018, vol. 740, pp. 910–25.10.1016/j.jallcom.2018.01.098 ↗
9. S. Cheruvathur, E.A. Lass, and C.E. Campbell: JOM, 2015, vol. 68, pp. 930–42.10.1007/s11837-015-1754-4 ↗
10. O. Andreau, I. Koutiri, P. Peyre, J.-D. Penot, N. Saintier, E. Pessard, T. De Terris, C. Dupuy, and T. Baudin: J. Mater. Process. Technol., 2019, vol. 264, pp. 21–31.10.1016/j.jmatprotec.2018.08.049 ↗
11. B.D.M.S. Pham and P.A. Hooper: Mater. Sci. Eng. A, 2017, vol. 704, pp. 102–11.10.1016/j.msea.2017.07.082 ↗
12. P. Lu, Z. Cheng-Lin, W. Liang, L. Tong, and L. Xiao-Cheng: Mater. Res. Express, 2020, vol. 6, pp. 1–8.10.1088/2053-1591/ab6b67 ↗
13. S. Hossein Nedjad, M. Yildiz, and A. Saboori: Sci. Technol. Weld. Join., 2022, vol. 28, pp. 1–7.10.1080/13621718.2022.2115664 ↗
14. T. Patterson, J. Lippold, and B. Panton: Weld. World, 2022, vol. 66, pp. 1521–34.10.1007/s40194-022-01285-6 ↗
15. A.J. Godfrey: Master of Science, University of Tennessee, 2021.
16. B. Lane, J. Heigel, R. Ricker, I. Zhirnov, V. Khromschenko, J. Weaver, T. Phan, M. Stoudt, S. Mekhontsev, and L. Levine: Integr. Mater. Manuf. Innov., 2020, vol. 9, pp. 16–30.10.1007/s40192-020-00169-1 ↗
17. W. Kurz and R. Trivedi: Mater. Sci. Eng. A, 1994, vol. 179(180), pp. 46–51.10.1016/0921-5093(94)90162-7 ↗
18. T. Pinomaa, M. Lindroos, M. Walbrühl, N. Provatas, and A. Laukkanen: Acta Mater., 2020, vol. 184, pp. 1–6.10.1016/j.actamat.2019.10.044 ↗
19. S. Gao, Z. Hu, M. Duchamp, P.S.S.R. Krishnan, S. Tekumalla, X. Song, and M. Seita: Acta Mater., 2020, vol. 200, pp. 366–77.10.1016/j.actamat.2020.09.015 ↗
20. P. Deng, H. Yin, M. Song, D. Li, Y. Zheng, B.C. Prorok, and X. Lou: JOM, 2020, vol. 72, pp. 4232–43.10.1007/s11837-020-04427-7 ↗
21. T. Voisin, J. McKeown, J. Ye, N. Calta, Z. Li, T. Roehling, P. Depond, M. Santala, W. Chen, M. Matthews, and Y.M. Wang, SEM 2018 (Lawrence Livermore National Laboratory, Oak Ridge, TN, 2018).
22. S. Dépinoy: Materialia, 2022, vol. 24, pp. 1–4.10.1016/j.mtla.2022.101472 ↗
23. J.C. Lippold: Weld. Res. Suppl., 1994, vol. 73, pp. 129–40.
24. J.W. Elmer and T.W. Eagar: Weld. Res. Suppl., 1990, vol. 04, pp. 141–50.
25. D. Stefanescu: Science and Engineering of Casting Solidification, Springer, New York, 2002, p. 354.10.1007/978-1-4757-6472-7 ↗
26. J.W. Elmer: Doctor of Science in Metallurgy, Massachusetts Institute of Technology, 1988.
27. N.L. Chabot, E.A. Wollack, W.F. McDonough, R.D. Ash, and S.A. Saslow: Meteorit. Planet. Sci., 2017, vol. 52, pp. 1133–45.10.1111/maps.12864 ↗
28. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–24.10.1016/j.pmatsci.2017.10.001 ↗
29. S. Katayama and A. Matsunawa: in International Congress on Applications of Lasers & Electro-Optics, 1984, pp. 60–67.10.2351/1.5057623 ↗
30. Z.A. Hasenbusch, J. M. Roze, S. Morales, G. Harvill, M. Canulette, A. Deal, B. Brown, D. Wilson, L. Nastac, and L.N. Brewer, Metall. Mater. Trans. A, 2023.
31. J.A. Brooks and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16–44.10.1179/imr.1991.36.1.16 ↗
32. J.M. Vitek, A. Dasgupta, and S.A. David: Metall. Trans. A, 1983, vol. 14, pp. 1833–42.10.1007/BF02645553 ↗
33. M.J. Perricone, J.N. Dupont, T.D. Anderson, C.V. Robino, and J.R. Michael: Metall. Mater. Trans. A., 2010, vol. 42A, pp. 700–16.
34. S. Kou: Welding Metallurgy, 2nd ed., Wiley, 2002, pp. 145–67, 243–49.
35. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle: Mater. Sci. Eng. A, 2020, vol. 772, pp. 1–25.10.1016/j.msea.2019.138633 ↗
36. F. Yan, W. Xiong, E. Faierson, and G.B. Olson: Scripta Mater., 2018, vol. 155, pp. 104–08.10.1016/j.scriptamat.2018.06.011 ↗
37. T.Z. Kattamis, W.F. Brower, and R. Mehrabian: J. Cryst. Growth, 1973, vol. 19, pp. 229–36.10.1016/0022-0248(73)90044-4 ↗