journal article·2023-11Open access

Investigation of the Effect of Chrome and Nickel Concentrations During Two-Piston Splat Quenching of Austenitic Stainless Steels

Zachary Arthur Hasenbusch, Jonathan Mitchell Roze, Sydney Morales, Greyson Harvill, Madyson Canulette, Andrew Deal, Ben Brown, Davis Wilson, Laurentiu Nastac, Luke N. Brewer

Abstract

For solidification rates at or near equilibrium solidification conditions the effects of chrome (Cr) and nickel (Ni) on stainless steel solidification modes and microstructures are well detailed. However, fusion-based additive manufacturing (FBAM) processes that rely on faster, more rapid solidification rates call for a more in-depth understanding of the effects of rapid solidification on the solidification behavior and how these change with variations in alloy composition. Eleven custom stainless steel (SS) alloys with unique compositions based on 316L were made using targeted alloying element additions to generate feedstock with Cr/Nieq ratios ranging from 0.9 to 2.1. Two-piston splat quenching (SQ) was used to produce rapid solidification conditions similar to those achieved in powder bed fusion processes in a fraction of the time and cost of traditional methods. Employing heat transfer simulations, SEM, TEM, and STEM characterization techniques, the SQ process was found to consistently produce solidification rates estimated to be between ~ 0.4 and 1.6 m/s. Five unique solidification microstructures were identified within the rapidly solidified SQ samples (primary austenite, massively transformed ferrite to austenite, primary austenite and massively transformed ferrite to austenite, primary ferrite, and primary ferrite and massively transformed ferrite to austenite). Both the primary ferrite solidification mode and primary ferrite phase were found to form at lower Cr/Nieq values than previously predicted. SQ samples with compositions that were within the compositional specifications for 316L SS, an alloy which is commonly used in FBAM processes, demonstrated a wider range of potential solidification modes and microstructures that could form at rapid solidification rates than expected. By using SQ as a means to simulate rapid solidification conditions similar to those observed in FBAM processes, potential new alloy compositions can be screened faster and more cost effectively than purchasing and running test batches of the metallic powder.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. S. Kou: Welding Metallurgy, 2 edn, Wiley, New Yok, 2002, pp. 145–67, 243–49.
2. J.W. Elmer: Doctor of Science in Metallurgy, Massachusetts Institute of Technology, 1988.
3. D.M. Wilson: Master of Science, Colorado School of Mines, 2019.
4. J.M. Vitek and S.A. David: Annual Meeting of the Metallurgical Society, Denver, CO, 1993.
5. J.A. Brooks and A.W. Thompson: Int. Mater. Rev., 1991, vol. 36, pp. 16–44.10.1179/imr.1991.36.1.16 ↗
6. V.G. Rivlin and G.V. Raynor: Int. Mater. Rev., 1980, vol. 25, pp. 21–40.10.1179/095066080790136172 ↗
7. T.D. Anderson, M.J. Perricone, J.N. DuPont, and A.R. Marder: Weld. J., 2007, vol. 86, pp. 281–92.
8. M.J. Perricone, J.N. Dupont, T.D. Anderson, C.V. Robino, and J.R. Michael: Metall. Mater. Trans. A., 2010, vol. 42A, pp. 700–16.
9. G.L. Leone and H.W. Kerr: Weld. Res. Suppl., 1982, vol. 61, pp. 13–23.
10. S. Fukumoto, K. Fujiwara, S. Toji, and A. Yamamoto: Mater. Sci. Eng. A, 2008, vol. 492, pp. 243–49.10.1016/j.msea.2008.05.002 ↗
11. S. Hossein Nedjad, M. Yildiz and A. Saboori: Science and Technology of Welding and Joining 2022, vol. 28, pp. 1–17.10.1080/13621718.2022.2115664 ↗
12. J.A. Brooks, T.J. Headley, and C.V. Robino: MRS Online Proc. Libr., 2000, vol. 625, pp. 1–2.10.1557/PROC-625-21 ↗
13. J.W. Elmer, S.M. Allen, and T.W. Eagar: Metall. Trans. A, 1989, vol. 20, pp. 2117–31.10.1007/BF02650298 ↗
14. D.J. Kotecki and T.A. Siewert: Weld. Res. Suppl., 1992, vol. 71, pp. 171–78.
15. N. Suutala, T. Takalo, and T. Moisio: Metall. Trans. A, 1979, vol. 10, pp. 512–15.10.1007/BF02697081 ↗
16. J.C. Lippold: Weld. Res. Suppl., 1994, vol. 73, pp. 129–40.
17. M.-A.V. Bermejo, T. DebRoy, K. Hurtig, L. Karlsson, and L.-E. Svensson: Phys. Procedia, 2015, vol. 78, pp. 230–39.10.1016/j.phpro.2015.11.033 ↗
18. S. Katayama and A. Matsunawa: In International Congress on Applications of Lasers & Electro-Optics, 1984, pp. 60–67.10.2351/1.5057623 ↗
19. A. Zambon and F. Bonollo: Mater. Sci. Eng. A, 1994, vol. 178, pp. 203–07.10.1016/0921-5093(94)90544-4 ↗
20. G. Jacob: NIST Adv. Manuf. Ser., 2018, vol. 14, p. 38.
21. J.S. Zuback, T.A. Palmer, and T. DebRoy: J. Alloys Compd., 2019, vol. 770, pp. 995–1003.10.1016/j.jallcom.2018.08.197 ↗
22. K. Saeidi, X. Gao, Y. Zhong, and Z.J. Shen: Mater. Sci. Eng. A, 2015, vol. 625, pp. 221–29.10.1016/j.msea.2014.12.018 ↗
23. Y. Zhong, L. Liu, S. Wikman, D. Cui, and Z. Shen: J. Nucl. Mater., 2016, vol. 470, pp. 170–78.10.1016/j.jnucmat.2015.12.034 ↗
24. A.J. Godfrey: Master of Science, University of Tennessee, 2021.
25. D. Kong, X. Ni, C. Dong, L. Zhang, C. Man, X. Cheng, and X. Li: Mater. Lett., 2019, vol. 235, pp. 1–5.10.1016/j.matlet.2018.09.152 ↗
26. D. Kong, C. Dong, X. Ni, and X. Li: NPJ Mater. Degrad., 2019, vol. 3, pp. 1–4.10.1038/s41529-019-0086-1 ↗
27. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
28. Z. Sun, X. Tan, S.B. Tor, and W.Y. Yeong: Mater. Des., 2016, vol. 104, pp. 197–204.10.1016/j.matdes.2016.05.035 ↗
29. U.S. Bertoli, U. Guss, G. Wu, S. Matthews, and M.J. Schoenung: Mater. Des., 2017, vol. 135, pp. 385–96.10.1016/j.matdes.2017.09.044 ↗
30. U.S. Bertoli, B.E. MacDonald, and J.M. Schoenung: Mater. Sci. Eng. A, 2019, vol. 739, pp. 109–17.10.1016/j.msea.2018.10.051 ↗
31. V.I. Tkatch, A.I. Limanovskii, S.N. Denisenko, and S.G. Rassolov: Mater. Sci. Eng. A, 2002, vol. 323, pp. 91–96.10.1016/S0921-5093(01)01346-6 ↗
32. T. Zacharia, S.A. David, J.M. Vitek, and T. DebRoy: Metall. Mater. Trans. A., 1989, vol. 20A, pp. 957–67.10.1007/BF02651661 ↗
33. R.C. Ruhl: Mater. Sci. Eng., 1967, vol. 1, pp. 313–20.10.1016/0025-5416(67)90013-4 ↗
34. R.C. Ruhl and M. Cohen: Trans. Metall. Soc. AIME, 1969, vol. 245, pp. 241–51.
35. K. Das and S. Das: J. Mater. Sci., 2003, vol. 38, pp. 3995–4002.10.1023/A:1026262616194 ↗
36. J.M. Vitek, A. Dasgupta, and S.A. David: Metall. Trans. A, 1983, vol. 14, pp. 1833–42.10.1007/BF02645553 ↗
37. R.W. Cahn, K.D. Kirshnanand, M. Laridjani, M. Greenholz, and R. Hill: Mater. Sci. Eng., 1976, vol. 23, pp. 83–86.10.1016/0025-5416(76)90171-3 ↗
38. M.R. Akbarpour, H.M. Mirabad, A. Hemmati, and H.S. Kim: Prog. Mater Sci., 2022, vol. 127, pp. 1–31.10.1016/j.pmatsci.2022.100933 ↗
39. C.-S. Oh, S.-W. Kim, and C.-S. Han: Korean J. Mater. Res., 2017, vol. 27, pp. 8–11.10.3740/MRSK.2017.27.1.8 ↗
40. H. Jones and C. Suryanarayana: J. Mater. Sci. 1973, vol. B, pp. 705–53.10.1007/BF00561226 ↗
41. M.G. Scott: J. Mater. Sci., 1975, vol. 10, pp. 269–73.10.1007/BF00540350 ↗
42. G. Quintana, H. Sirkin, M. Rosen, and D. Kurlat: Revista Brasileria de Fisica, 1979, vol. 9, pp. 123–28.
43. D.M. Kroeger, W.A. Coghlan, D.S. Easton, C.C. Koch, and J.O. Scarbrough: J. Appl. Phys., 1982, vol. 53, pp. 1445–53.10.1063/1.330639 ↗
44. C. Hayzelden, J.J. Rayment, and B. Cantor: Acta Metall., 1982, vol. 31, pp. 379–86.10.1016/0001-6160(83)90215-8 ↗
45. H. Jones: Mater. Lett., 1996, vol. 26, pp. 133–36.10.1016/0167-577X(95)00213-8 ↗
46. W. Kurz and R. Trivedi: Mater. Sci. Eng. A, 1994, vol. 179(180), pp. 46–51.10.1016/0921-5093(94)90162-7 ↗
47. D. Stefanescu: Science and Engineering of Casting Solidification, Springer, New York, 2002, p. 354.10.1007/978-1-4757-6472-7 ↗
48. J.W. Elmer, T.W. Eagar, and S.M. Allen: Weldability Mater, ASM International, Detroit, 1990, pp. 143–50.
49. S. Gao, Z. Hu, M. Duchamp, P.S.S.R. Krishnan, S. Tekumalla, X. Song, and M. Seita: Acta Mater., 2020, vol. 200, pp. 366–77.10.1016/j.actamat.2020.09.015 ↗
50. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle: Mater. Sci. Eng. A, 2020, vol. 772, pp. 1–25.10.1016/j.msea.2019.138633 ↗
51. S. Gorsse, C. Hutchinson, M. Goune, and R. Banerjee: Sci. Technol. Adv. Mater., 2017, vol. 18, pp. 584–610.10.1080/14686996.2017.1361305 ↗
52. J.A. Brooks, M.I. Baskes, and F.A. Greulich: Metall. Trans. A, 1991, vol. 22A, pp. 915–22.10.1007/BF02659001 ↗
53. S. Kou and Y. Le: Metall. Trans. A, 1982, vol. 13A, pp. 1141–53.10.1007/BF02645495 ↗
54. T. Iamboliev, S. Katayama and A. Matsunawa: Weld. Res. Suppl. 2003, pp. 337–48.
55. S. Fukumoto and W. Kurz: ISIJ Int., 1997, vol. 37, pp. 677–84.10.2355/isijinternational.37.677 ↗
56. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
57. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall. Mater., 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
58. P. Merinov, S. Entin, B. Beketov, and A. Runov: NDT Int., 1978, vol. 11, pp. 9–14.10.1016/0308-9126(78)90003-2 ↗
59. P.E. Merinov, S.D. Entin, B.I. Beketov, and A.E. Runov: Svarochn. Proizvod., 1977, vol. 3, pp. 49–50.
60. J.W. Elmer and T.W. Eagar: Weld. Res. Suppl., 1990, vol. 04, pp. 141–50.
61. W. Wang and H. Qiu: Int. J. Heat Mass Transf., 2002, vol. 45, pp. 2043–53.10.1016/S0017-9310(01)00307-6 ↗
62. ASTM: In ASTM A240/A240M-20a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications, ASTM International, West Conshohocken, PA, 2020, p. 13.
63. T. Voisin, J. McKeown, J. Ye, N. Calta, Z. Li, T. Roehling, P. Depond, M. Santala, W. Chen, and M. Matthews: Lawrence Livermore National Laboratory, Oak Ridge, 2018.
64. P. Deng, H. Yin, M. Song, D. Li, Y. Zheng, B.C. Prorok, and X. Lou: JOM, 2020, vol. 72, pp. 4232–43.10.1007/s11837-020-04427-7 ↗
65. Z. A. Hasenbusch, A. Deal, B. Brown, D. Wilson, L. Nastac and L. N. Brewer: Microsc. Microanal. 2023.
66. F.S.H.B. Freeman, J. Sharp, J. Xi, and I. Todd: Addit. Manuf., 2019, vol. 30, pp. 1–7.
67. T. Pinomaa, M. Lindroos, M. Walbrühl, N. Provatas, and A. Laukkanen: Acta Mater., 2020, vol. 184, pp. 1–6.10.1016/j.actamat.2019.10.044 ↗
68. O. Andreau, I. Koutiri, P. Peyre, J.-D. Penot, N. Saintier, E. Pessard, T. De Terris, C. Dupuy, and T. Baudin: J. Mater. Process. Technol., 2019, vol. 264, pp. 21–31.10.1016/j.jmatprotec.2018.08.049 ↗
69. J.V. Wood and R.W.K. Honeycombe: J. Mater. Sci., 1974, vol. 9, pp. 1183–89.10.1007/BF00552836 ↗
70. J. Goldstein, D. Newbury, J. Michael, N. Ritchie, J. Scott, and D. Joy: Scanning Electron Microscopy and X-Ray Microanalysis, 4th ed. Springer, New York, 2018, p. 550.10.1007/978-1-4939-6676-9 ↗
71. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, P.J. Depond, M.J. Matthews, A.V. Hamza, and T. Zhu: Nat Mater, 2018, vol. 17, pp. 63–71.10.1038/nmat5021 ↗
72. L. Liu, Q. Ding, Y. Zhong, J. Zou, J. Wu, Y.-L. Chiu, J. Li, Z. Zhang, Q. Yu, and Z. Shen: Mater. Today, 2018, vol. 21, pp. 354–61.10.1016/j.mattod.2017.11.004 ↗