Superior Capacity in Electric Double-Layer Capacitors Employing Three-Dimensional Titanium Foam Electrodes
Source abstract
Abstract
In this study, Ti foams with 80 to 85 pct porosity and 300 to 500 μm pore size were fabricated using a unique space holder method. Because of their large surface area originated from sufficiently small pore size (a few hundreds of micrometers), good mechanical properties, interconnected three-dimensional (3D) structure with high electrical conductivity, and sufficiently short diffusion distances for electrons, they were successfully demonstrated as a novel 3D structured current collector for a next-gen electric double layer capacitor (EDLC). An additional heat treatment was performed on the fabricated Ti foams to further improve their mechanical properties, thus sustaining their structure over a long operational lifetime and enabling higher porosity 3D metal foam structure (a higher amount of slurry filling and enhanced capacity). Compressive test revealed a noticeable increase in the yield strength of the Ti foam due to the heat-treatment. The gravimetric capacity of the Ti foam-based electric double-layer capacitors was estimated to be between 33 and 37 F/g at 0.025 A/g. Furthermore, the novel 3D Ti foam electrodes, when compared with the typical foil-type electrodes, exhibited considerably more efficient charging/discharging reactions, thus resulting in enhanced volumetric capacitance as compared to commercially available EDLCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. L. Xue, Z. Fu, Y. Yao, T. Huang, and A. Yu: Electrochim. Acta, 2010, vol. 55, pp. 7310–14.10.1016/j.electacta.2010.07.015 ↗
2. M. Jayalakshmi and K. Balasubramanian: Int. J. Electrochem. Sci., 2008, vol. 3, pp. 1196–1217.10.1016/S1452-3981(23)15517-9 ↗
3. J. Partridge and D.I. Abouelamaimen: Energies, 2019, vol. 12, p. 2683.10.3390/en12142683 ↗
4. J.C. Schroeder and F.W. Fuchs: IEEE Trans. Power Electron., 2015, vol. 30, pp. 922–32.10.1109/TPEL.2014.2313811 ↗
5. M. Inagaki, H. Konno, and O. Tanaike: J. Power Sources, 2010, vol. 195, pp. 7880–7903.10.1016/j.jpowsour.2010.06.036 ↗
6. J.H. Choi, C. Lee, S. Cho, G.D. Moon, B. su kim, H. Chang, and H.D. Jang: Carbon N. Y., 2018, vol. 132, pp. 16–24.10.1016/j.carbon.2018.01.105 ↗
7. J.J. Ren, L.W. Su, X. Qin, M. Yang, J.P. Wei, Z. Zhou, and P.W. Shen: J. Power Sources, 2014, vol. 264, pp. 108–13.10.1016/j.jpowsour.2014.04.076 ↗
8. N. Liu, J. Shen, and D. Liu: Microporous Mesoporous Mater., 2013, vol. 167, pp. 176–81.10.1016/j.micromeso.2012.09.009 ↗
9. B. Xu, F. Wu, R. Chen, G. Cao, S. Chen, Z. Zhou, and Y. Yang: Electrochem. Commun., 2008, vol. 10, pp. 795–97.10.1016/j.elecom.2008.02.033 ↗
10. S. Mitani, M. Sathish, D. Rangappa, A. Unemoto, T. Tomai, and I. Honma: Electrochim. Acta, 2012, vol. 68, pp. 146–52.10.1016/j.electacta.2012.02.034 ↗
11. C. Zhong, Y. Deng, W. Hu, J. Qiao, L. Zhang, and J. Zhang: Chem. Soc. Rev., 2015, vol. 44, pp. 7484–7539.10.1039/C5CS00303B ↗
12. A. Lewandowski, P. Jakobczyk, M. Galinski, and G. Lota: J. Power Sources, 2015, vol. 280, pp. 289–92.10.1016/j.jpowsour.2015.01.104 ↗
13. E. Sahraei, M. Kahn, J. Meier, and T. Wierzbicki: RSC Adv., 2015, vol. 5, pp. 80369–80.10.1039/C5RA17865G ↗
14. Y. Song, J. Hwang, S. Lee, B. Thirumalraj, J.H. Kim, P. Jenei, J. Gubicza, and H. Choe: Adv. Eng. Mater., 2020, vol. 22, pp. 1–8.10.1002/adem.202070043 ↗
15. G. Han, J.H. Um, H. Park, K. Hong, W.S. Yoon, and H. Choe: Scr. Mater., 2019, vol. 163, pp. 9–13.10.1016/j.scriptamat.2018.12.030 ↗
16. O. Smorygo, A. Marukovich, V. Mikutski, A.A. Gokhale, G.J. Reddy, and J.V. Kumar: Mater. Lett., 2012, vol. 83, pp. 17–19.10.1016/j.matlet.2012.05.082 ↗
17. N. Tuncer and G. Arslan: J. Mater. Sci., 2009, vol. 44, pp. 1477–84.10.1007/s10853-008-3167-z ↗
18. S.T. Myung, Y. Sasaki, S. Sakurada, Y.K. Sun, and H. Yashiro: Electrochim. Acta, 2009, vol. 55, pp. 288–97.10.1016/j.electacta.2009.08.051 ↗
19. M. Fritsch, G. Standke, C. Heubner, U. Langklotz, and A. Michaelis: J. Energy Storage, 2018, vol. 16, pp. 125–32.10.1016/j.est.2018.01.006 ↗
20. Y. Fan, L. Wang, Z. Ma, W. Dai, H. Shao, H. Wang, and G. Shao: Part. Part. Syst. Charact., 2018, vol. 35, pp. 1–6.
21. P. Jenei, C. Kádár, G. Han, P.T. Hung, H. Choe, and J. Gubicza: Metals (Basel), 2020, vol. 10, pp. 1–1.10.3390/met10091128 ↗
22. M.J. Lain, J. Brandon, and E. Kendrick: Batteries, 2019, vol. 5, pp. 1–1.10.3390/batteries5040064 ↗
23. B.R. Long, S.G. Rinaldo, K.G. Gallagher, D.W. Dees, S.E. Trask, B.J. Polzin, A.N. Jansen, D.P. Abraham, I. Bloom, J. Bareño, and J.R. Croy: 35th Annu. Int. Batter. Semin. Exhib. 2018, 2018, vol. 1, pp. 112–22.
24. I. Yang, J. Yoo, D. Kwon, D. Choi, M.S. Kim, and J.C. Jung: Carbon N. Y., 2020, vol. 160, pp. 45–53.10.1016/j.carbon.2020.01.024 ↗
25. H. Gualous, H. Louahlia, and R. Gallay: IEEE Trans. Power Electron., 2011, vol. 26, pp. 3402–09.10.1109/TPEL.2011.2145422 ↗
26. T. Aydoǧmuş and Ş Bor: J. Alloys Compd., 2009, vol. 478, pp. 705–10.10.1016/j.jallcom.2008.11.141 ↗
27. K. Nam, H. Park, H. Choi, and H. Choe: Mater. Lett., 2018, vol. 214, pp. 99–102.10.1016/j.matlet.2017.11.077 ↗
28. H. Park, H.H. Cho, K. Kim, K. Hong, J.H. Kim, H. Choe, and D.C. Dunand: Acta Mater., 2018, vol. 142, pp. 213–25.10.1016/j.actamat.2017.09.066 ↗
29. J.H. Um, H. Park, Y.H. Cho, M.P.B. Glazer, D.C. Dunand, H. Choe, and Y.E. Sung: RSC Adv., 2014, vol. 4, pp. 58059–63.10.1039/C4RA12297F ↗
30. L.D. Zardiackas, D.E. Parsell, L.D. Dillon, D.W. Mitchell, L.A. Nunnery, and R. Poggie: J. Biomed. Mater. Res., 2001, vol. 58, pp. 180–87.10.1002/1097-4636(2001)58:2<180::AID-JBM1005>3.0.CO;2-5 ↗
31. N. Wang, E. Maire, Y. Cheng, Y. Amani, Y. Li, J. Adrien, and X. Chen: Mater. Charact., 2018, vol. 138, pp. 296–307.10.1016/j.matchar.2018.02.015 ↗
32. N. Tuncer, G. Arslan, E. Maire, and L. Salvo: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7368–74.10.1016/j.msea.2011.06.028 ↗
33. M. Li, M.J. Mondrinos, X. Chen, M.R. Gandhi, F.K. Ko, and P.I. Lelkes: J. Biomed. Mater. Res. Part A, 2006, vol. 79, pp. 963–73.10.1002/jbm.a.30833 ↗
34. X. Xiong, D. Ding, D. Chen, G. Waller, Y. Bu, Z. Wang, and M. Liu: Nano Energy, 2015, vol. 11, pp. 154–61.10.1016/j.nanoen.2014.10.029 ↗
35. Z. Esen and Ş Bor: Scr. Mater., 2007, vol. 56, pp. 341–44.10.1016/j.scriptamat.2006.11.010 ↗
36. S. Ishimoto, Y. Asakawa, M. Shinya, and K. Naoi: J. Electrochem. Soc., 2009, vol. 156, p. A563.10.1149/1.3126423 ↗
37. B. Pal, S. Yang, S. Ramesh, V. Thangadurai, and R. Jose: Nanoscale Adv., 2019, vol. 1, pp. 3807–35.10.1039/C9NA00374F ↗
38. P. Ruschhaupt, A. Varzi, and S. Passerini: Chemsuschem, 2020, vol. 13, pp. 763–70.10.1002/cssc.201902863 ↗
39. L. Liu, X. Wang, V. Izotov, D. Havrykov, I. Koltsov, W. Han, Y. Zozulya, O. Linyuchevad, V. Zahorodna, O. Gogotsid, and Y. Gogotsi: Ectrochumuca Acta., 2019, vol. 302, pp. 38–44.10.1016/j.electacta.2019.02.004 ↗
40. L. Chang and Y.H. Hu: Matter, 2019, vol. 1, pp. 596–620.10.1016/j.matt.2019.06.016 ↗
41. J. Luo, H.D. Jang, and J. Huang: ACS Nano, 2013, vol. 7, pp. 1464–71.10.1021/nn3052378 ↗
42. H. Choi, O.H. Kim, M. Kim, H. Choe, Y.H. Cho, and Y.E. Sung: ACS Appl. Mater. Interfaces, 2014, vol. 6, pp. 7665–71.10.1021/am500962h ↗
43. Z. Ren, Y. Li, and J. Yu: iScience, 2018, vol. 9, pp. 138–48.10.1016/j.isci.2018.10.016 ↗