The Influence of Cu on Combustion Synthesis Mechanism of Ti–Al Intermetallic Compounds Produced From Ti and Al Elemental Powders
Source abstract
Abstract
The influence of slight content of Cu as an additive on the reaction mechanism and microstructure of Ti–Al intermetallic compounds, during sintering process of Ti and Al elemental powders, was investigated. High-purity powders of Al, Ti, and Cu were used. The molar ratio of Ti/Al was equal to one. Considerable changes in reaction mechanism and heat of formation for different samples with different heating rates and different additive contents during combustion synthesis process were observed. The temperature was monitored by a data acquisition system or DAS. The samples were analyzed by XRD and SEM techniques. According to the experimental findings, complete formation of products was achieved at distinct additive content and heating rate. The initial reaction temperature and the samples’ porosities were lowered by the addition of Cu. The sample hardness varied depending on the heating rate and Cu content.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Energetic Materials and Combustion · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Q. Wan, F. Li, W. Wang, J. Hou, W. Cui, and Y. Li: Materials, 2019, vol. 12, p. 1967. https://doi.org/10.3390/ma12121967.10.3390/ma12121967 ↗
2. N. Kochetov and A.E. Sytschev: Mater. Chem. Phys., 2021, vol. 257, p. 123727. https://doi.org/10.1016/j.matchemphys.2020.123727.10.1016/j.matchemphys.2020.123727 ↗
3. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48(1), pp. 307–22. https://doi.org/10.1016/S1359-6454(99)00301-8.10.1016/S1359-6454(99)00301-8 ↗
4. P. Tan, H.P. Tang, X.T. Kang, Q.B. Wang, J.L. Zhu, C. Li, and J.M. Chen: Mater. Trans., 2009, vol. 50(10), pp. 2484–87. https://doi.org/10.2320/matertrans.M2009120.10.2320/matertrans.M2009120 ↗
5. A. Školáková, P. Salvetr, P. Novák, and D. Vojtěch: Acta Phys. Pol. A, 2018, vol. 134, pp. 743–47. https://doi.org/10.12693/APhysPolA.134.743.10.12693/APhysPolA.134.743 ↗
6. K. Karczewski, S. Jóźwiak, M. Chojnacki, and Z. Bojar: Intermetallics, 2010, vol. 18(7), pp. 1401–04. https://doi.org/10.1016/j.intermet.2010.02.018.10.1016/j.intermet.2010.02.018 ↗
7. E. Levashov, A.S. Mukasyan, A.S. Rogachev, and D.V. Shtansky: Int. Mater. Rev., 2017, vol. 62(4), pp. 203–39. https://doi.org/10.1080/09506608.2016.1243291.10.1080/09506608.2016.1243291 ↗
8. M. Lagos, I. Agote, M. Gutiérrez, A. Sargsyan, and L. Pambaguian: Int. J. Self-Propagating High-Temp. Synth., 2010, vol. 19(1), pp. 23–27. https://doi.org/10.3103/S1061386210010048.10.3103/S1061386210010048 ↗
9. X. Jiao, Y. Liu, X. Cai, J. Wang, and P. Feng: J. Mater. Sci., 2021, https://doi.org/10.1007/s10853-021-06035-5.10.1007/s10853-021-06035-5 ↗
10. K. Karczewski, S. Jóźwiak, M. Chojnacki, and Z. Bojar: Intermetallics, 2011, vol. 19(10), pp. 1555–62. https://doi.org/10.1016/j.intermet.2011.05.029.10.1016/j.intermet.2011.05.029 ↗
11. S. Mehrabani, A.T. Tabrizi, H. Aghajani, and H. Pourbagheri: Int. J. Self-Propagating High-Temp. Synth., 2020, vol. 29(3), pp. 167–72. https://doi.org/10.3103/S1061386220030061.10.3103/S1061386220030061 ↗
12. J.J. Moore and H.J. Feng: Prog. Mater. Sci., 1995, vol. 39(4–5), pp. 243–73. https://doi.org/10.1016/0079-6425(94)00011-5.10.1016/0079-6425(94)00011-5 ↗
13. S. Arabpour Javadi, S. Nozohour Hokmabadi, A. Taghizadeh Tabrizi, and H. Aghajani: Powder Metall., 2021, vol. 64(5), pp. 341–50. https://doi.org/10.1080/00325899.2021.1906564.10.1080/00325899.2021.1906564 ↗
14. M. Busurina, A.E. Sychev, I.D. Kovalev, A.V. Karpov, and N.V. Sachkova: Combust. Explos. Shock Waves, 2020, vol. 56(3), pp. 317–23. https://doi.org/10.1134/S0010508220030089.10.1134/S0010508220030089 ↗
15. Z. Deng, H. Yin, C. Zhang, G. Zhang, T. Zhang, Z. Liu, H. Wang, and X. Qu: Prog. Nat. Sci.-Mater., 2019, vol. 29(4), pp. 425–31. https://doi.org/10.1016/j.pnsc.2019.04.007.10.1016/j.pnsc.2019.04.007 ↗
16. A. Hibino and R. Watanabe: Nippon Kinzoku Gakkaishi/ J. Jpn. Inst., 1991, vol. 55(11), pp. 1256–62. https://doi.org/10.2320/jinstmet1952.55.11_1256.10.2320/jinstmet1952.55.11_1256 ↗
17. H. Yi, A. Petric, and J.J. Moore: J. Mater. Sci., 1992, vol. 27(24), pp. 6797–6806. https://doi.org/10.1007/BF01165971.10.1007/BF01165971 ↗
18. V. Sanin, M.R. Filonov, V.I. Yukhvid, Yu.A. Anikin, and D.M. Ikornikov: Russ. J. Non-Ferr. Met., 2020, vol. 61(1), pp. 119–25. https://doi.org/10.3103/S1067821220010137.10.3103/S1067821220010137 ↗
19. H. Okamoto and T.B. Massalski: Binary Alloy Phase Diagrams, ASM International, Materials Park, 1990. https://doi.org/10.31399/asm.hb.v03.9781627081634.10.31399/asm.hb.v03.9781627081634 ↗
20. A. Hibino, Y. Sumiyoshi, and K. Hayashi: J. Jpn. Soc. Powder Powder Metall., 2011, vol. 58, pp. 625–32. https://doi.org/10.2497/jjspm.58.625.10.2497/jjspm.58.625 ↗
21. H.-W. Liu and K.P. Plucknett: Adv. Powder Technol., 2017, vol. 28(1), pp. 314–23. https://doi.org/10.1016/j.apt.2016.10.001.10.1016/j.apt.2016.10.001 ↗
22. U. Kattner, J.-C. Lin, and Y.A. Chang: Metall. Trans. A, 1992, vol. 23, pp. 2081–90. https://doi.org/10.1007/BF02646001.10.1007/BF02646001 ↗
23. P. Wang, Z. Chen, C. Hu, B. Li, J. Lin, and Q. Liu: J. Mater. Res. Technol., 2020, vol. 9(5), pp. 11813–25. https://doi.org/10.1016/j.jmrt.2020.08.070.10.1016/j.jmrt.2020.08.070 ↗
24. R. Khoshhal, M. Soltanieh, and M. Mirjalili: Iran. J. Mater. Sci. Eng., 2010, vol. 7(1), pp. 24–31.
25. S.-M. Liang and R. Schmid-Fetzer: Calphad, 2015, vol. 51, pp. 252–60. https://doi.org/10.1016/j.calphad.2015.10.004.10.1016/j.calphad.2015.10.004 ↗
26. P. Canale and C. Servant: Z. Met., 2002, vol. 93(4), pp. 273–76. https://doi.org/10.3139/146.020273.10.3139/146.020273 ↗
27. D. Kumar, M. Singh, and A.K. Singh: AIP Conference Proceedings, AIP Publishing LLC, 2018. https://doi.org/10.1063/1.5032520.10.1063/1.5032520 ↗
28. F.R. Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, A.K. Niessen, Cohesion in metals: Transition Metal Alloys, vol. 1, North Holland, Amsterdam, 1988.
29. W. Oelsen and W. Middel: Verlag Stahleisen, 1937.
30. R. Sinvhal and P.R. Khangaonkar: Trans. Indian Inst. Met., 1967, vol. 20, pp. 107–10.
31. O. Kubaschewski and G. Heymer: J. Chem. Soc. Faraday Trans., 1960, vol. 56, pp. 473–78. https://doi.org/10.1039/TF9605600473.10.1039/TF9605600473 ↗
32. J. Hair and D.B. Downie: Faraday Symposia of the Chemical Society, Royal Society of Chemistry, London, 1973. https://doi.org/10.1039/FS9730800056.10.1039/FS9730800056 ↗
33. V. Witusiewicz, U. Hecht, S.G. Fries, and S. Rex: J. Alloys Compd., 2004, vol. 385(1–2), pp. 133–43. https://doi.org/10.1016/j.jallcom.2004.04.126.10.1016/j.jallcom.2004.04.126 ↗
34. M.A. Majid and R. Yousefi: Solid State Sci., 2011, vol. 13(1), pp. 251–56. https://doi.org/10.1016/j.solidstatesciences.2010.11.024.10.1016/j.solidstatesciences.2010.11.024 ↗
35. Y.T. Prabhu, K.V. Rao, V.S.S. Kumar, and B.S. Kumari: World J. Nano Sci. Eng., 2014, https://doi.org/10.4236/wjnse.2014.41004.10.4236/wjnse.2014.41004 ↗
36. C. Suryanarayana and M. Grant Norton: X-ray Diffraction, Springer, New York, 1998, pp. 63–94.10.1007/978-1-4899-0148-4 ↗
37. A. Mishra, H. Roy, A. Lohar, S. Samanta, S. Tiwari, and K. Dutta: Mater. Sci. Eng., 2015, https://doi.org/10.1088/1757-899X/75/1/012001.10.1088/1757-899X/75/1/012001 ↗