journal article·2023-08

Explaining the Abnormal Dilatation Behavior During the Austenite Formation in a Microstructure of a Low-Carbon Low-Alloy Steel Containing Retained Austenite

William Lemos Bevilaqua, Jérémy Epp, Alexandre da Silva Rocha, Hans Roelofs

Publisher page

Abstract

During continuous heating of a low-carbon low-alloy steel in a dilatometer, an abnormal macroscopic expansion has been observed in the length change of the sample during the onset of austenite formation. Such abnormal expansion behavior is also detected in the literature data with similar initial microstructures and heating rates on various steels. Here, this work investigates the causes and consequences of this abnormal expansion using in situ high-energy X-ray diffraction analysis. According to the volume investigated by diffraction, a significant amount of austenite forms before the onset of the macroscopic contraction of the sample associated with the bainite-to-austenite transformation. The delay in the macroscopic contraction is due to the retained austenite lattice expansion, arising from the concentration inhomogeneities in this phase produced by carbides dissolution during austenitization. The retained austenite lattice expansion manifests as a macroscopic expansion in the length change of the sample. Such abnormal expansion results in a significant overestimation of the Ac1 temperature, and a systematic shift in the austenite formation kinetics determined by dilatometry in comparison with X-ray diffraction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. T. Klein, M. Lukas, P. Haslberger, B. Friessnegger, M. Galler, and G. Ressel: JOM, 2019, vol. 71, pp. 1357–365.10.1007/s11837-019-03331-z ↗
2. M. Chang and H. Yu: Int. J. Miner. Metall. Mater., 2013, vol. 20, pp. 427–32.10.1007/s12613-013-0746-z ↗
3. F.G. Caballero, C. García-Mateo, and C. García de Andrades: Mater. Trans., 2005, vol. 46, pp. 581–86.10.2320/matertrans.46.581 ↗
4. J.R. Yang and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1991, vol. 131, pp. 99–113.10.1016/0921-5093(91)90349-R ↗
5. M.A. Valdes-Tabernero, C. Celada-Casero, I. Sabirov, A. Kumar, and R.H. Petrov: Mater. Charact., 2019, vol. 155, 109822.10.1016/j.matchar.2019.109822 ↗
6. I. Hordycha, K. Bilda, V. Boiarkinb, D. Rodmana, and N. Florian: Procedia Manuf., 2018, vol. 18, pp. 1062–70.10.1016/j.promfg.2018.07.386 ↗
7. T. De Cock, C. Capdevila, F.G. Caballero, and C.G. de Andrés: Scr. Mater., 2006, vol. 54, pp. 949–54.10.1016/j.scriptamat.2005.10.052 ↗
8. F. Christien, M.T.F. Telling, and K.S. Knight: Mater. Charact., 2013, vol. 82, pp. 50–57.10.1016/j.matchar.2013.05.002 ↗
9. I.R.S. Filho, D.R. Almeida Jr., C. Gauss, M.J.R. Sandim, P.A. Suzuki, and H.R.Z. Sandim: Mater. Sci. Eng. A, 2019, vol. 755, pp. 267–77.10.1016/j.msea.2019.04.014 ↗
10. B. Denand, V.A. Esin, M. Dehmas, G. Geandier, S. Denis, T. Sourmail, and E. Aeby-Gautier: Materialia, 2020, vol. 10, 100664.10.1016/j.mtla.2020.100664 ↗
11. V.A. Esin, B. Denand, Q. Le Bihan, M. Dehmas, J. Teixeira, G. Geandier, S. Denis, T. Sourmail, and E. Aeby-Gautier: Acta Mater., 2014, vol. 80, pp. 118–31.10.1016/j.actamat.2014.07.042 ↗
12. W.L. Bevilaqua, J. Epp, H. Meyer, J. Dong, H. Roelofs, A. da Silva Rocha, and A. Reguly: Metals (Basel), 2021, vol. 11, p. 467.10.3390/met11030467 ↗
13. W.L. Bevilaqua, J. Epp, H. Meyer, A. Da Silva Rocha, and H. Roelofs: Metall. Mater. Trans. A, 2020, vol. 51, pp. 3627–637.10.1007/s11661-020-05800-6 ↗
14. G. Ashiotis, A. Deschildre, Z. Nawaz, J.P. Wright, D. Karkoulis, F.E. Picca, and J. Kieffer: J. Appl. Crystallogr., 2015, vol. 48, pp. 510–19.10.1107/S1600576715004306 ↗
15. S.Y.P. Allain, S. Gaudez, G. Geandier, F. Danoix, M. Soler, and M. Goune: Scr. Mater., 2020, vol. 181, pp. 108–14.10.1016/j.scriptamat.2020.02.022 ↗
16. S. Reisinger, E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, and R. Ebner: Mater. Des., 2018, vol. 155, pp. 475–84.10.1016/j.matdes.2018.06.014 ↗
17. A.S. Nishikawa, G. Miyamoto, T. Furuhara, A.P. Tschiptschin, and H. Goldenstein: Acta Mater., 2019, vol. 179, pp. 1–16.10.1016/j.actamat.2019.08.001 ↗
18. E.A. Ariza, A. Nishikawa, H. Goldenstein, and A.P. Tschiptschin: Mater. Sci. Eng. A, 2016, vol. 671, pp. 54–69.10.1016/j.msea.2016.06.038 ↗
19. D.J. Dyson, B. Holmes (1970)J. Iron Steel Inst., vol. 208, pp. 469–74.
20. E.J. Pickering, J. Collins, A. Stark, L.D. Connor, A.A. Kiely, and H.J. Stone: Mater. Charact., 2020, vol. 165, 110355.10.1016/j.matchar.2020.110355 ↗
21. I. Vieira, J. Klemm-Toole, E. Buchner, D.L. Williamson, K.O. Findley, and E. De Moor: Sci. Rep., 2017, vol. 7, p. 17337.10.1038/s41598-017-17654-x ↗
22. M. Zorgani, C. Garcia-Mateo, and M. Jahazi: Mater. Des., 2021, vol. 210, 110082.10.1016/j.matdes.2021.110082 ↗
23. I. Lonardelli, M. Bortolotti, W. van Beek, L. Girardini, M. Zadra, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2012, vol. 555, pp. 139–47.10.1016/j.msea.2012.06.043 ↗
24. L. Guo, H. Roelofs, M.I. Lembke, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2017, vol. 33, pp. 1013–18.10.1080/02670836.2016.1258157 ↗
25. T. Kop: Delft University of Technology, 2000.
26. R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, and G.R. Purdy: Acta Mater., 2013, vol. 61, pp. 697–707.10.1016/j.actamat.2012.10.019 ↗
27. J.J. Mueller, X. Hu, X. Sun, Y. Ren, K. Choi, E. Barker, J.G. Speer, D.K. Matlock, and E. De Moor: Mater. Des., 2021, vol. 203, 109598.10.1016/j.matdes.2021.109598 ↗
28. H. Bhadeshia, L. Guo, H. Roelfs, and M. Lembke: 2018. https://www.repository.cam.ac.uk/items/24886c15-de15-4df8-bf8d-7b28c351119b.
29. C.N. Hulme-Smith, I. Lonardelli, M.J. Peet, A.C. Dippel, and H.K.D.H. Bhadeshia: Scr. Mater., 2013, vol. 69, pp. 191–94.10.1016/j.scriptamat.2013.03.029 ↗
30. T. Sourmail and V. Smanio: Mater. Sci. Technol., 2013, vol. 29, pp. 883–88.10.1179/1743284713Y.0000000209 ↗
31. C.G. De Andrés, J.A. Jiménez, and L.F. Álvarez: Metall. Mater. Trans. A, 1996, vol. 27, pp. 1799–805.10.1007/BF02651929 ↗
32. F.G. Caballero, L.F. Álvarez, C. Capdevila, and C. G. de Andrés: Scr. Mater., 2003, vol. 49, pp. 315–20.10.1016/S1359-6462(03)00281-1 ↗
33. Y.I. Ustinovshchikov: Met. Sci., 1984, vol. 18, pp. 337–44.10.1179/030634584790419917 ↗
34. G. Krauss: Steels: Processing, Structure, and Performance, ASM International, 2005.
35. A. Eggbauer, M. Lukas, G. Ressel, P. Prevedel, F. Mendez-Martin, J. Keckes, A. Stark, and R. Ebner: J. Mater. Sci., 2019, vol. 54, pp. 9197–212.10.1007/s10853-019-03527-3 ↗
36. M. Yonemura, H. Nishibata, T. Nishiura, N. Ooura, Y. Yoshimoto, K. Fujiwara, K. Kawano, T. Terai, Y. Inubushi, I. Inoue, K. Tono, and M. Yabashi: Sci. Rep., 2019, vol. 9, p. 11241.10.1038/s41598-019-47668-6 ↗