Effect of Texture on Strain Localization and Crack Initiation in Polycrystalline Beryllium Under Static Tension: Experimental Study and Micromechanical Simulations
Source abstract
Abstract
The mechanisms of deformation and crack initiation in polycrystalline beryllium during static tension were studied in this work using EBSD analysis and crystal plasticity simulations. Results showed that cold deformation of beryllium was accompanied by an extremely inhomogeneous distribution of accumulated strain associated with different activities of slip systems and grain interactions. The fracture of beryllium occurs by two mechanisms strongly related to its crystallographic texture. Impossibility of slip along the basal and prismatic systems leads to brittle transgranular fracture at small strains. Localization of strain at the conjugation of grains with favorable and unfavorable conditions for prismatic slip produces intergranular cracks due to the exhaustion of beryllium plasticity. Moreover, activation of basal or prismatic slip is not only controlled by the grain orientation but also by the stress concentration raised by grain interactions. The modified Cockcroft–Latham criterion and the stress triaxiality parameter showed a reasonable agreement between the predicted and observed regions of intergranular crack formation. For accurate estimation of the fracture probability, the strong dependence of fracture strain or of the criterion limiting value on the grain orientation should be taken into consideration.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. T. Parsonage: Mater. Sci. Technol., 2000, vol. 16, pp. 732–38.10.1179/026708300101508522 ↗
2. W.J. Haws: JOM, 2000, vol. 52, pp. 35–37.10.1007/s11837-000-0031-2 ↗
3. Y. Wang, C. Wang, Z. Meng, Y. Liu, J. Liu, Y. Li, and L. Yang: Nucl. Mater. Energy, 2022, vol. 31, 101181.10.1016/j.nme.2022.101181 ↗
4. V. Kuksenko, K. Ammigan, B. Hartsell, C. Densham, P. Hurh, and S. Roberts: J. Nucl. Mater., 2017, vol. 490, pp. 260–71.10.1016/j.jnucmat.2017.04.011 ↗
5. V. Kuksenko, A. Lunev, E. Darnbrough, C. Densham, P. Hurh, and S. Roberts: J. Nucl. Mater., 2021, vol. 555, 153130.10.1016/j.jnucmat.2021.153130 ↗
6. N. Zimber and P. Vladimirov: J. Nucl. Mater., 2022, vol. 568, 153855.10.1016/j.jnucmat.2022.153855 ↗
7. T.B. Parsonage: E. Atad-Ettedgui and P. Dierickx, eds., 2004, p. 39.10.1117/12.552030 ↗
8. M.J. Russo, S. LoBiondo, B. Coon, M. Engelhardt, W. Pinzon, W.A. Goodman and J.L. Robichaud, eds., 2007, p. 66660T.10.1117/12.732225 ↗
9. H.R. Beguiristain, J.T. Cremer, M.A. Piestrup, C.K. Gary, and R.H. Pantell: Opt. Lett., 2002, vol. 27, p. 778.10.1364/OL.27.000778 ↗
10. O.V. Yurkevich, K.Y. Maksimova, A.Y. Goikhman, A.A. Snigirev, and I.I. Snigireva: J. Surf Investig. X-ray Synchrotron Neutron Tech., 2015, vol. 9, pp. 243–47.10.1134/S1027451015020202 ↗
11. Z. Chen, G. Jin, K. Chen, Y. Chen, Y. Song, L. Hu, L. Niu, X. Sheng, Y. Cheng, and K. Lu: Fusion Eng. Des., 2013, vol. 88, pp. 3280–286.10.1016/j.fusengdes.2013.10.006 ↗
12. D.W. Brown, S.P. Abeln, W.R. Blumenthal, M.A.M. Bourke, M.C. Mataya, and C.N. Tomé: Metall. Mater. Trans. A, 2005, vol. 36, pp. 929–39.10.1007/s11661-005-0287-9 ↗
13. M. Knezevic, I.J. Beyerlein, D. Brown, T.A. Sisneros, and C. Tomé: Int. J. Plast., 2013, vol. 49, pp. 185–98.10.1016/j.ijplas.2013.03.008 ↗
14. I.A. Shishov, V.V. Mishin, and I.A. Kasatkin: Mater. Charact., 2021, vol. 180, 111427.10.1016/j.matchar.2021.111427 ↗
15. V.V. Mishin, I.A. Shishov, O.N. Stolyarov, I.A. Kasatkin, and P.A. Glukhov: Mater. Charact., 2020, vol. 164, 110350.10.1016/j.matchar.2020.110350 ↗
16. V. Kuksenko, S. Roberts, and E. Tarleton: Int. J. Plast., 2019, vol. 116, pp. 62–80.10.1016/j.ijplas.2018.12.008 ↗
17. V.V. Mishin, I.A. Shishov, O.N. Stolyarov, I.A. Kasatkin, and P.A. Glukhov: Materialia, 2020, vol. 11, 100726.10.1016/j.mtla.2020.100726 ↗
18. J. Beuers, S. Jönsson, and G. Petzow: Acta Metall., 1987, vol. 35, pp. 2277–287.10.1016/0001-6160(87)90075-7 ↗
19. A. Couret and D. Caillard: Philos. Mag. A, 1989, vol. 59, pp. 783–800.10.1080/01418618908209820 ↗
20. V.C. Kannan and S. Weissmann: J. Appl. Phys., 1971, vol. 42, pp. 2632–638.10.1063/1.1660600 ↗
21. F. Aldinger: in Beryllium Science and Technology, Volume 1, D. Webster, ed., Plenum Press, New York, 1979.
22. D. Webster, ed.: Beryllium Science and Technology, Springer, Boston, 1979.
23. A. Staroselsky and L. Anand: Int. J. Plast., 2003, vol. 19, pp. 1843–864.10.1016/S0749-6419(03)00039-1 ↗
24. W. Li, L. Wang, B. Zhou, C. Liu, and X. Zeng: J. Mater. Sci. Technol., 2019, vol. 35, pp. 2200–206.10.1016/j.jmst.2019.04.030 ↗
25. D.W. Brown, M.A.M. Bourke, C.N. Tomé, R. Varma, T.M. Holden, and B. Clausen: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1439–449.10.1007/s11661-003-0256-0 ↗
26. D.W. Brown, I.J. Beyerlein, T.A. Sisneros, B. Clausen, and C.N. Tomé: Int. J. Plast., 2012, vol. 29, pp. 120–35.10.1016/j.ijplas.2011.08.006 ↗
27. N.C. Ferreri, Z. Feng, D.J. Savage, D.W. Brown, B. Clausen, T.A. Sisneros, and M. Knezevic: Int. J. Plast., 2022, vol. 150, 103217.10.1016/j.ijplas.2022.103217 ↗
28. T.A. Book and M.D. Sangid: Mater. Charact., 2016, vol. 122, pp. 104–12.10.1016/j.matchar.2016.10.018 ↗
29. K. Il-Kim, Y. Oh, D.U. Kim, J.-H. Kang, N.I. Cho, K.H. Oh, J.-Y. Kang, and H.N. Han: Met. Mater. Int., 2022, vol. 28, pp. 1094–104.10.1007/s12540-021-01044-0 ↗
30. N. Saeidi, M. Jafari, F. Ashrafizadeh, M. Karimi, S. Ziaei-Rad, and H.S. Kim: Mater. Res. Express, 2018, vol. 5, 126507.10.1088/2053-1591/aae044 ↗
31. R. Jiang, W. Zhang, L. Zhang, Y. Zhao, L. Zhang, and Y. Song: Fatigue Fract. Eng. Mater. Struct., 2022, vol. 45, pp. 1635–651.10.1111/ffe.13685 ↗
32. S. Gelles, V. Nerses, and J.M. Siergiej: JOM, 1963, vol. 15, pp. 843–48.10.1007/BF03397261 ↗
33. G. Sumner: Int. J. Fract. Mech., 1966, vol. 2, pp. 448–59.10.1007/BF00183822 ↗
34. M. Diehl, M. Wicke, P. Shanthraj, F. Roters, A. Brueckner-Foit, and D. Raabe: JOM, 2017, vol. 69, pp. 872–78.10.1007/s11837-017-2308-8 ↗
35. W.F. Spurr and W.E. Quist: in 1973 International Automotive Engineering Congress and Exposition, SAE International, 1973.
36. M.K. Samal, A. Syed, J. Chattopadhyay, A.M. Ram, B. Paul, and M.C. Reddy: J. Nucl. Mater., 2020, vol. 535, 152189.10.1016/j.jnucmat.2020.152189 ↗
37. V. Grigoriev and S. Andersson: Influence of Texture on Fracture Toughness of Zircaloy Cladding, Sweden, 1997.10.1520/STP16184S ↗
38. G.C. Prakash, H.N. Bar, S. Sivaprasad, S. Tarafder, and S. Biswas: IOP Conf. Ser. Mater. Sci. Eng., 2021, vol. 1121, 012028.10.1088/1757-899X/1121/1/012028 ↗
39. M.A. Beltran-Zuñiga, J.L. González-Velázquez, D.I. Rivas-López, H.J. Dorantes-Rosales, and F. Hernández-Santiago: Fatigue Fract. Eng. Mater. Struct., 2018, vol. 41, pp. 749–61.10.1111/ffe.12782 ↗
40. G. Lagerberg: Metallurgical Viewpoints on the Brittleness of Beryllium, Sweden, 1960.
41. R. Armstrong: Acta Metall., 1968, vol. 16, pp. 347–55.10.1016/0001-6160(68)90021-7 ↗
42. J. Wittenauer, T.G. Nieh, and G. Waychunas: J. Mater. Sci., 1992, vol. 27, pp. 2653–659.10.1007/BF00540685 ↗
43. F.J. Humphreys, P.S. Bate, and P.J. Hurley: J. Microsc., 2001, vol. 201, pp. 50–8.10.1046/j.1365-2818.2001.00777.x ↗
44. F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S.L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K.G.F. Janssens, N. Jia, P.J.J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand, and D. Raabe: Comput. Mater. Sci., 2019, vol. 158, pp. 420–78.10.1016/j.commatsci.2018.04.030 ↗
45. P. Eisenlohr, M. Diehl, R.A. Lebensohn, and F. Roters: Int. J. Plast., 2013, vol. 46, pp. 37–53.10.1016/j.ijplas.2012.09.012 ↗
46. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024–37.10.1107/S0021889808030112 ↗
47. M.I. Latypov, S. Shin, B.C. De Cooman, and H.S. Kim: Acta Mater., 2016, vol. 108, pp. 219–28.10.1016/j.actamat.2016.02.001 ↗
48. J.W. Hutchinson: Proc. R. Soc. London. A, 1976, vol. 348, pp. 101–27.10.1098/rspa.1976.0027 ↗
49. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2010, vol. 58, pp. 1152–211.10.1016/j.actamat.2009.10.058 ↗
50. B.L. Hansen, I.J. Beyerlein, C.A. Bronkhorst, E.K. Cerreta, and D. Dennis-Koller: Int. J. Plast., 2013, vol. 44, pp. 129–46.10.1016/j.ijplas.2012.12.006 ↗
51. M. Lindroos, G. Cailletaud, A. Laukkanen, and V.-T. Kuokkala: Mater. Sci. Eng. A, 2018, vol. 720, pp. 145–59.10.1016/j.msea.2018.02.028 ↗
52. C.Y. Sun, N. Guo, M.W. Fu, and S.W. Wang: Int. J. Plast., 2016, vol. 76, pp. 186–212.10.1016/j.ijplas.2015.08.003 ↗
53. S.L. Wong, M. Madivala, U. Prahl, F. Roters, and D. Raabe: Acta Mater., 2016, vol. 118, pp. 140–51.10.1016/j.actamat.2016.07.032 ↗
54. K. Sedighiani, M. Diehl, K. Traka, F. Roters, J. Sietsma, and D. Raabe: Int. J. Plast., 2020, vol. 134, 102779.10.1016/j.ijplas.2020.102779 ↗
55. S. Deng, H. Song, H. Liu, and S.-H. Zhang: Int. J. Solids Struct., 2021, vol. 213, pp. 63–76.10.1016/j.ijsolstr.2020.12.015 ↗
56. A.K. Singh, L. Kaushik, J. Singh, H. Das, M. Mondal, S.-T. Hong, and S.-H. Choi: Int. J. Plast., 2022, vol. 150, 103184.10.1016/j.ijplas.2021.103184 ↗
57. D. Tromans: Int. J. Res. Rev. Appl. Sci.
58. S.I. Oh, C.C. Chen, and S. Kobayashi: J. Eng. Ind., 1979, vol. 101, pp. 36–44.10.1115/1.3439471 ↗
59. W. Jia, L. Wang, L. Ma, H. Li, H. Xie, and Y. Yuan: J. Mater. Res. Technol., 2022, vol. 17, pp. 2047–058.10.1016/j.jmrt.2022.01.067 ↗
60. S. Choudhary, P.K. Singh, S. Khare, K. Kumar, P. Mahajan, and R.K. Verma: Int. J. Impact Eng., 2020, vol. 140, 103557.10.1016/j.ijimpeng.2020.103557 ↗
61. S. Stebunov, A. Vlasov, and N. Biba: Procedia Manuf., 2018, vol. 15, pp. 519–26.10.1016/j.promfg.2018.07.264 ↗
62. R. Zhao, X.J. Li, M. Wan, J.Q. Han, B. Meng, and Z.Y. Cai: Mater. Des., 2017, vol. 130, pp. 413–25.10.1016/j.matdes.2017.05.089 ↗
63. N. Hatanaka, K. Yamaguchi, and N. Takakura: J. Mater. Process. Technol., 2003, vol. 139, pp. 64–70.10.1016/S0924-0136(03)00183-3 ↗
64. H. Talebi-Ghadikolaee, H.M. Naeini, M.J. Mirnia, M.A. Mirzai, H. Gorji, and S. Alexandrov: Thin-Walled Struct., 2020, vol. 148, 106566.10.1016/j.tws.2019.106566 ↗
65. G. Mirone: Eng. Fract. Mech., 2007, vol. 74, pp. 1203–221.10.1016/j.engfracmech.2006.08.002 ↗
66. J.-M. Seo, H.-T. Kim, Y.-J. Kim, H. Yamada, T. Kumagai, H. Tokunaga, and N. Miura: Nucl. Eng. Technol., https://doi.org/10.1016/j.net.2022.02.002.10.1016/j.net.2022.02.002 ↗
67. H. Zhang, X. Li, T. Gao, H. Song, and G. Huang: Eng. Fract. Mech., 2021, vol. 258, 108127.10.1016/j.engfracmech.2021.108127 ↗
68. Y.C. Lin, X.-H. Zhu, W.-Y. Dong, H. Yang, Y.-W. Xiao, and N. Kotkunde: J. Alloys Compd., 2020, vol. 832, 154988.10.1016/j.jallcom.2020.154988 ↗
69. W. Liu, J. Huang, J. Liu, X. Wu, K. Zhang, and A. Huang: Int. J. Fatigue, 2021, vol. 148, 106203.10.1016/j.ijfatigue.2021.106203 ↗