Microstructure and Corrosion Behavior of Re-Added Cemented Carbides in Simulated Seawater
Source abstract
Abstract
WC-10(Co-xRe) cemented carbides were prepared by vacuum sintering. The addition of Rhenium (Re) resulted in the grain refinement and martensite phase transition of cemented carbides. Additionally, increased grains and phase boundaries were observed in the cemented carbides using SEM and electron back-scattered diffraction (EBSD), leading to increased corrosion sites and corrosion current (Icorr). However, the corrosion voltage (Ecorr) of the cemented carbides containing Re increased due to Re’s higher standard electrode potential compared to Cobalt (Co). An excessive amount of Re led to the precipitation of the secondary phase in the cemented carbides, which formed new galvanic batteries between different phases. In the WC-9Co-1Re cemented carbide, a maximum charge transfer resistance of 1183.0 Ω cm2 was achieved. The passivation film, composed of Co(OH)2 and Co3O4, isolated the cemented carbide from the corrosive medium, thereby inhibiting further corrosion. Primary corrosion mechanisms involved the dissolution of the Co binder phase and exfoliation of the WC grains. The optimal corrosion resistance was obtained by adding 1 wt pct of Re to the cemented carbide.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Metal Extraction and Bioleaching
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. J. García, V.C. Ciprés, A. Blomqvist, and B. Kaplan: Int. J. Refract. Met. H., 2019, vol. 80, pp. 40–68.10.1016/j.ijrmhm.2018.12.004 ↗
2. Z.H. Ma, S.L. Nie, F.L. Yin, and H. Ji: Ceram Int., 2022, vol. 48, pp. 463–71.10.1016/j.ceramint.2021.09.122 ↗
3. X. Zhai, H. Ji, S.L. Nie, F.L. Long, and Z.H. Ma: Int. J. Refract. Met. H., 2022, vol. 102, p. 105727.10.1016/j.ijrmhm.2021.105727 ↗
4. Z.X. Liu, Y.X. Li, X.H. Xie, J. Qin, and Y. Wang: Ceram Int., 2021, vol. 47, pp. 25655–63.10.1016/j.ceramint.2021.05.291 ↗
5. Z.X. Guo, J. Xiong, W.C. Wan, G.B. Dong, and M. Yang: Int. J. Appl. Ceram. Technol., 2014, vol. 11, pp. 1045–53.10.1111/ijac.12128 ↗
6. J. Jayaraj and O. Mikael: Int. J. Refract. Met. H., 2021, vol. 100, p. 105621.10.1016/j.ijrmhm.2021.105621 ↗
7. R. Steinlechner, R. de Oro Calderon, T. Koch, P. Linhardt, and W.D. Schubert: Int. J. Refract. Met. H., 2022, vol. 103, p. 105750.10.1016/j.ijrmhm.2021.105750 ↗
8. R. F. Santos, A. M. Ferro Rocha, A.C Bastos, J. P. Cardoso, F. Rodrigues, C. M. Fernandes, J. Sacramento, M. G. S. Ferreira, A. M. R.Senos, C. Fonseca, M. F. Vieira and L. F. Malheiros: Int. J. Refract. Met. H., 2021, vol. 95, p. 105434.10.1016/j.ijrmhm.2020.105434 ↗
9. A.R. Boukantar, B. Djerdjare, F. Guiberteau, and A.L. Ortiza: Int. J. Refract. Met. H., 2020, vol. 92, p. 105280.10.1016/j.ijrmhm.2020.105280 ↗
10. S.D. Guo, R. Bao, S.Y. Li, Y.W. Ye, E.T. Zhu, W.J. Wang, Y.X. Zhang, H. Chen, and Y. Ye: J. Alloys Compd., 2020, vol. 827, p. 154269.10.1016/j.jallcom.2020.154269 ↗
11. R.F. Santos, A.M.F. Rocha, A.C. Bastos, J.P. Cardoso, F. Rodrigues, C.M. Fernandes, J. Sacramento, M.G.C. Ferreira, A.M.R. Senos, C. Fonseca, M.F. Vieira, and L.F. Malheiros: Int. J. Refract. Met. H., 2020, vol. 86, p. 105090.10.1016/j.ijrmhm.2019.105090 ↗
12. H. Jin, R.J. Ji, T.C. Dong, S. Liu, F. Zhang, L.L. Zhao, C. Ma, B.P. Cai, and Y.H. Liu: J. Mater. Res. Technol., 2022, vol. 16, pp. 152–67.10.1016/j.jmrt.2021.11.145 ↗
13. S.H. Chang and P.Y. Chang: Mater. Sci. Eng. A., 2014, vol. 618, pp. 56–62.10.1016/j.msea.2014.08.081 ↗
14. H. Scholl, B. Hofman, and A. Rauscher: Electrochim. Acta, 1992, vol. 37, pp. 447–52.10.1016/0013-4686(92)87034-W ↗
15. A.R. Boukantar, B. Djerdjare, F. Guiberteau, and A.L. Ortiz: Int. J. Refract. Met. H., 2021, vol. 95, p. 105452.10.1016/j.ijrmhm.2020.105452 ↗
16. W. Su, Y.X. Sun, J. Liu, J. Feng, and J.M. Ruan: Ceram Int., 2015, vol. 41, pp. 3169–77.10.1016/j.ceramint.2014.10.165 ↗
17. W.J. Tomlinson and N.J. Ayerst: J. Mater Sci., 1989, vol. 24, pp. 2348–52.10.1007/BF01174495 ↗
18. R. de Oro Calderon, C. Edtmaier and W. Schubert: Int. J. Refract. Met. H., 2019, vol. 85, p. 105063.10.1016/j.ijrmhm.2019.105063 ↗
19. J. H. Potgieter, N. Thanjekwayo, P. Olubambi, et al. N. Maledi and S. S. V. Potgieter: Int. J. Refract. Met. H., 2011,vol. 29, pp. 478–87.10.1016/j.ijrmhm.2011.02.007 ↗
20. H. Zhang, J. Xiong, Z.X. Guo, T.E. Yang, J.B. Liu, and T. Hua: Ceram Int., 2021, vol. 47, pp. 26050–62.10.1016/j.ceramint.2021.06.011 ↗
21. I. Konyashin and A. Schwedt: Mater. Lett., 2019, vol. 249, pp. 57–61.10.1016/j.matlet.2019.04.055 ↗
22. B. Li, R.G. He, H.L. Yang, D. Zou, Y.J. Liu, Y. Liang, Q.M. Yang, and Y.X. Li: Int. J. Refract. Met. H., 2020, vol. 93, p. 105344.10.1016/j.ijrmhm.2020.105344 ↗
23. B. Huang, Y.K. Gong, X. Xiang, W.K. Zhang, D.Q. Dong, K.H. Shi, J.B. Gu, H.W. Xiong, and L. Zhang: Vac., 2022, vol. 195, p. 110701.10.1016/j.vacuum.2021.110701 ↗
24. K.F. Jing, Z.X. Guo, T. Hua, J. Xiong, J. Liao, L. Liang, S.D. Yang, J.S. Yi, and H. Zhang: Mater. Sci. Eng. A, 2022, vol. 838, p. 142803.10.1016/j.msea.2022.142803 ↗
25. A.F. Lisovskii: Powder Metall. Met. Ceram., 2000, vol. 39, pp. 428–33.10.1023/A:1011306204246 ↗
26. X. Zhang, J.H. Zhou, C. Liu, K. Li, W.J. Shen, Z. Lin, Z.F. Li, Y.H. He, and N. Lin: Int. J. Refract. Met. H., 2019, vol. 80, pp. 123–29.10.1016/j.ijrmhm.2019.01.004 ↗
27. X. Q. Fu, Y. C. Ji, X. Q. Cheng, C. F. Dong, Y. Fan and X. G. Li,: Mater. Today Commun., 2020, vol. 25, p. 101429.10.1016/j.mtcomm.2020.101429 ↗
28. P.J. Wang, L.W. Ma, X.Y. Cheng, and X.G. Li: J. Alloys Compd., 2021, vol. 857, p. 158258.10.1016/j.jallcom.2020.158258 ↗
29. S. Sutthiruangwong and G. Mori: Int. J. Refract. Met. H., 2003, vol. 21, pp. 135–45.10.1016/S0263-4368(03)00027-1 ↗
30. B.S. Liu, Y.T. Yan, J.H. Lin, J. Cao, and J.L. Qi: Vac., 2022, vol. 197, p. 110850.10.1016/j.vacuum.2021.110850 ↗
31. Y.W. Ye, Y.J. Zou, Z.L. Jiang, Q.M. Yang, L.M. Chen, S.D. Guo, and H. Chen: J. Alloys Compd., 2020, vol. 815, p. 152338.10.1016/j.jallcom.2019.152338 ↗
32. G. Greczynski and L. Hultman: Appl. Surf. Sci., 2018, vol. 451, pp. 99–103.10.1016/j.apsusc.2018.04.226 ↗
33. G. Greczynski and L. Hultman: Sci. Rep., 2021, vol. 11, p. 11195.10.1038/s41598-021-90780-9 ↗
34. B.W. Fan, S.G. Zhu, W.W. Dong, H. Ding, Y.F. Bai, Y.L. Luo, and P. Di: Ceram. Int., 2021, vol. 47, pp. 7106–16.10.1016/j.ceramint.2020.11.063 ↗
35. B.J. Tan, K.J. Klabunde, and P.M. Sherwood: J. Am. Chem. Soc., 1991, vol. 113, pp. 855–61.10.1021/ja00003a019 ↗
36. J.P. Bonnelle, J. Grimblot, and A. D’Huysser: J. Electron Spectrosc., 1975, vol. 7, pp. 151–62.10.1016/0368-2048(75)80047-8 ↗
37. U. Anselmi-Tamburini, S. Gennari, J.E. Garay, and Z.A. Munir: Mater. Sci. Eng. A., 2005, vol. 394, pp. 139–48.10.1016/j.msea.2004.11.019 ↗
38. D. Mueller, A. Shih, E. Roman, T. Madey, R. Kurtz, and R. Stockbauer: J. Vac. Sci. Technol. A., 1988, vol. 6, pp. 1067–71.10.1116/1.575637 ↗
39. K.L. Håkansson, H. Johansson, and L.I. Johansson: Phys. Rev. B, 1994, vol. 49, p. 2035.10.1103/PhysRevB.49.2035 ↗
40. S.M. Youssry, I.S. El-Hallag, R. Kumar, G. Kawamura, A. Matsuda, and M.N. El-Nahass: J. Electroanal. Chem., 2020, vol. 857, p. 113728.10.1016/j.jelechem.2019.113728 ↗
41. S.D. Guo, W. Yan, J.H. Yi, S.L. Wang, X. Huang, S.R. Yang, M.L. Zhang, and Y.W. Ye: Ceram Int., 2020, vol. 46, pp. 17243–51.10.1016/j.ceramint.2020.04.011 ↗
42. P.D. Schulze, S.L. Shaffer, R.L. Hance, and D.L. Utley: J. Vac. Sci. Technol. A., 1983, vol. 1, pp. 97–99.10.1116/1.572321 ↗
43. B. Folkesson, M. Bjorøy, J. Pappas, S. Skaarup, and R. Aaltonen: Acta Chem. Scand, 1973, vol. 27, p. 19.
44. A. Fazili, M.R. Derakhshandeh, S. Nejadshamsi, L. Nikzad, M. Razavi, and E. Ghasali: J. Alloys Compd., 2020, vol. 823, 153857.10.1016/j.jallcom.2020.153857 ↗
45. W.A. Badawy, F.M. Al-Kharafi, and J.R. Al-Ajmi: J. Appl. Electrochem., 2000, vol. 30, pp. 693–704.10.1023/A:1003893122201 ↗
46. F.J.J. Kellner, H. Hildebrand, and S. Virtanen: Int. J. Refract. Met. H., 2009, vol. 27, pp. 806–12.10.1016/j.ijrmhm.2009.02.004 ↗
47. A.M. Human, B. Roebuck, and H.E. Exner: Mater. Sci. Eng. A., 1998, vol. 241, pp. 202–10.10.1016/S0921-5093(97)00492-9 ↗