Mechanical and Microstructural Analysis of Friction Surfaced Aluminum Coatings on Silicon Nitride Ceramic Substrates
Source abstract
Abstract
Abstract The lack of suitable techniques for joining Si$$3{\text{N}}4$$ ceramics with metals has limited the usage of this otherwise outstanding material for composite applications. In this study, aluminum AlMgSi0.5 (EN AW-6060) was coated onto silicon nitride Si$$3{\text{N}}4$$ ceramic substrates using friction surfacing technology. Experimental work revealed that the harmful effects of thermal shock (e.g., substrate cracking, coating delamination) observed with other material combinations can be avoided by selecting materials with a low coefficient of thermal expansion, low Young’s modulus and high thermal conductivity. Design of experiments derived models for coating thickness and bonding strength fit the data well (i.e., the regression model accounts for most of the variation in the response variable). Whereas the coating thickness is predominately dependent on the rotational speed used, the bonding strength is also affected by the traverse speed. Coating thicknesses upto 2.03 mm and bonding strengths of 42.5 MPa were achieved. Deposition rates exceed those of physical vapor deposition by a magnitude of ×1000 and bonding strength is on-par with thin-film metallization. Scanning transmission electron microscope analysis revealed formation of a glassy phase at the interface. Using energy-dispersive X-ray spectroscopy analysis high silicon and oxygen content with smaller percentages of aluminum and nitrogen were detected. High-resolution transmission electron microscope imaging revealed no distinct lattice structure leading to the assumption that the composition is predominantly amorphous and consists of SiAlON.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. R.B. Heimann: Classic and Advanced Ceramics: From fundamentals to applications, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2010.10.1002/9783527630172 ↗
2. C.B. Carter, and M.G. Norton: Ceramic Materials: Science and Engineering, Second edition, Springer, New York, 2013.10.1007/978-1-4614-3523-5 ↗
3. Grand View Research, eds: Ceramics Market Size, Share & Trends Analysis Report By Product (Traditional, Advanced), By Application (Sanitary Ware, Abrasives, Tiles), By End-Use; By Region, And Segment Forecasts, 2019 - 2025. Grand View Research, 2019.
4. Versailles Project on Advanced Materials and Standards: (VAMAS): UK, USA, CEC, Canada, Germany, France, Italy, Japan: technical report, Wirtschaftsverl. NW Verl. für Neue Wiss, Bremerhaven, 1992.
5. M. Pfeifer: Materials Enabled Designs: The Materials Engineering Perspective to Product Design and Manufacturing, Butterworth-Heinemann, Amsterdam and Boston, 2009.
6. H.B. Atil, M. Leonhardt, R.J. Grant, and S. Barrans: Proc. Inst. Mech. Eng. Part L, 2021, vol. 235(2), pp. 366–84. https://doi.org/10.1177/146442072096561410.1177/1464420720965614 ↗
7. M.B. Uday, M.N. Ahmad-Fauzi, A.M. Noor, and S. Rajoo: in Joining technologies, M. Ishak, ed., InTech, Rijeka, 2016.
8. H. Pulfrich: Verfahren zum vakuumdichten Verbinden von metallischen und keramischen Teilen: Patent DE000000659427A. https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf &docid=DE000000659427A
9. Y. Imanaka: Multilayered Low Temperature Cofired Ceramics (LTCC) Technology, Springer Science+Business Media Inc, Boston, MA, 2005. http://site.ebrary.com/lib/alltitles/docDetail.action?docID=10133705.
10. J.T. Klomp: in Surfaces and Interfaces of Ceramic Materials, L.C. Dufour, C. Monty, G. Petot-Ervas, eds., Springer, Dordrecht, 1989, pp.375–9210.1007/978-94-009-1035-5_23 ↗
11. M. Wenzel, R. Schmidt, U. Partsch, and M. Eberstein: in Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT). 2013, 2013, pp. 000144–48. https://doi.org/10.4071/CICMT-WP2210.4071/CICMT-WP22 ↗
12. D.M. Mattox, and A. Short: hort, History: Adhesion, Interface Formation, and Stress in PVD Coatings. vol. Spring, of Bulletin, Society of Vacuum Coaters, Albuquerque, 2016.
13. A. Zalar, B.M.M. Baretzky, S. Hofmann, M. Rühle, and P. Panjan: Thin Solid Films, 1999, vol. 352(1–2), pp. 151–55. https://doi.org/10.1016/S0040-6090(99)00352-110.1016/S0040-6090(99)00352-1 ↗
14. C. Xin, W. Liu, N. Li, J. Yan, and S. Shi: Ceram. Int., 2016, vol. 42(8), pp. 9599–9604. https://doi.org/10.1016/j.ceramint.2016.03.04410.1016/j.ceramint.2016.03.044 ↗
15. R. Brener, F. Edelman, and E.Y. Gutmanas: Appl. Phys. Lett., 1989, vol. 54(10), pp. 901–03. https://doi.org/10.1063/1.10141810.1063/1.101418 ↗
16. C.A. Walker, and V.C. Hodges: Weld. J. (Miami, Fla)., 2008, vol. 87, pp. 43–50.
17. W. Weißbach: Werkstoffkunde: Strukturen, Eigenschaften, Prüfung. 17th ed. Springer eBook Collection Computer Science & Engineering. Wiesbaden: Vieweg+Teubner; 2010. https://link-springer-com.hske.idm.oclc.org/content/pdf/10.1007%2F978-3-8348-9343-7.pdf.
18. R. Telle: Keramik, 7th edn. Springer, Berlin/Heidelberg, 2007.10.1007/978-3-540-49469-0 ↗
19. BSI British Standards: Advanced technical ceramics—Methods of testing monolithic ceramics—Thermomechanical properties: BS EN 820-3, 2004.
20. D.P.H. Hasselman: Ceramurg. Int., 1978, vol. 4(4), pp. 147–50. https://doi.org/10.1016/0390-5519(78)90028-510.1016/0390-5519(78)90028-5 ↗
21. 3M Technical Ceramics: 3M Boron Carbide: Typical Material Properties. https://multimedia.3m.com/mws/media/1004125O/3m-boron-carbide.pdf.
22. Kyocera Corporation: Mechanical & Industrial Ceramics. https://global.kyocera.com/prdct/fc/product/pdf/mechanical.pdf.
23. A. Kılıçarslan, F. Toptan, I. Kerti, and S. Piskin: Mater. Lett., 2014, vol. 128, pp. 224–26. https://doi.org/10.1016/j.matlet.2014.04.13810.1016/j.matlet.2014.04.138 ↗
24. J.P. Viricelle, P. Goursat, and D. Bahloul-Hourlier: J. Therm. Anal. Calorim., 2000, vol. 63(2), pp. 507–515. https://doi.org/10.1023/A:101013370328410.1023/A:1010133703284 ↗
25. C. Varadachari, R. Bhowmick, and K. Ghosh: ISRN Thermodyn., 2012, vol. 2012, pp. 1–8. https://doi.org/10.5402/2012/10878110.5402/2012/108781 ↗
26. C.B. Carter, and M.G. Norton: Ceramic Materials: Science and Engineering, Springer Science+Business Media, LLC, New York, 2007.
27. J. Pelleg: Mechanical Properties of Ceramics. Solid Mechanics and Its Applications, vol. 213, Springer, Cham, 2014.10.1007/978-3-319-04492-7 ↗
28. W. Martienssen, G. Effenberg, S. Ilyenko, G. Effenberg, H. Landolt, R. Börnstein, et al., eds.: Numerical Data and Functional Relationships in Science and Technology: New Series. Landolt-Börnstein - Group IV Physical Chemistry, vol. 11, Springer, Berlin, 2005.
29. S. Qu, A. Feng, L. Geng, J. Shen, and D. Chen: Metals, 2020, vol. 10(3), p. 420. https://doi.org/10.3390/met1003042010.3390/met10030420 ↗
30. X.M. Liu, Z.D. Zou, Y.H. ZHANG, S.Y. Qu, and X.H. Wang: Surf. Coat. Technol., 2008, 202(9), pp. 1889–94. https://doi.org/10.1016/j.surfcoat.2007.08.02410.1016/j.surfcoat.2007.08.024 ↗
31. 3M Technical Ceramics: 3M Sintered Silicon Nitride TM: Technical Data Sheet. https://multimedia.3m.com/mws/media/1826516O/3m-advanced-materials-tds-sintered-silicon-nitride-d-cer-tds-d.pdf.
32. MR Chemie GmbH: Penetrant testing DIN EN ISO 3452-1. https://www.mr-chemie.de/wp-content/uploads/mr-produktinformationen/v_pt_process_description_en.pdf.
33. J. Antony: Design of Experiments for Engineers and Scientists, 2nd ed. Elsevier insights. Amsterdam, 2014. http://gbv.eblib.com/patron/FullRecord.aspx?p=1644387.
34. G.B. Barrett: Math. Teacher, 2000, vol. 93(3), pp. 230–234.10.5951/MT.93.3.0230 ↗
35. M.J.R. Stegmueller, P. Schindele, and R.J. Grant: J. Mater. Process. Technol., 2015, vol. 216, pp. 430–39. https://doi.org/10.1016/j.jmatprotec.2014.10.01310.1016/j.jmatprotec.2014.10.013 ↗
36. J. Gandra, R.M. Miranda, and P. Vilaça: J. Mater. Process. Technol., 2012, vol. 212(8), pp. 1676–86. https://doi.org/10.1016/j.jmatprotec.2012.03.01310.1016/j.jmatprotec.2012.03.013 ↗
37. M.N. Fauzi, M.B. Uday, H. Zuhailawati, and A.B. Ismail: Mater. Design., 2010 vol. 31(2), pp. 670–76. https://doi.org/10.1016/j.matdes.2009.08.01910.1016/j.matdes.2009.08.019 ↗
38. M.B. Uday, M.N. Ahmad Fauzi, H. Zuhailawati, and A.B. Ismail: Mater. Sci. Eng. A, 2011, vol. 528(13–14), pp. 4753–60. https://doi.org/10.1016/j.msea.2011.02.09110.1016/j.msea.2011.02.091 ↗
39. F. Edelman, E. Gutmanas, and R. Brener: MRS Proc., 1989, vol. 153, p. 7. https://doi.org/10.1557/PROC-153-7710.1557/PROC-153-77 ↗
40. Y. Mutoh, Y. Miyashita, T. Hansson, and M. Takahashi: in Plastic Deformation of Ceramics, R.C. Bradt, C.A. Brookes, and J.L. Routbort, eds., Springer, US, Boston, MA, 1995, pp.653–66
41. W. Weibull: J. Appl. Mech., 1951, vol. 18(3), pp. 293–297. https://doi.org/10.1115/1.401033710.1115/1.4010337 ↗
42. J. Rösler, H. Bäker, and M. Bäker: Mechanisches Verhalten der Werkstoffe: Mit 34 Aufgaben mit Lösungen, 3rd edn, Studium. Wiesbaden: Vieweg + Teubner, 2008.
43. ASTM Standard C1161-18: Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature. ASTM International, West Conshohocken, PA.
44. ASTM Standard C1499-19: Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature, ASTM International, West Conshohocken, PA.
45. DIN Deutsches Institut für Normung e V : Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 1: Determination of flexural strength; German version EN 843-1:2006. DIN Deutsches Institut für Normung e.V.
46. T. Lube, and J. Dusza: J. Eur. Ceram. Soc., 2007, vol. 27(2–3), pp. 1203–09. https://doi.org/10.1016/j.jeurceramsoc.2006.04.02010.1016/j.jeurceramsoc.2006.04.020 ↗
47. R. Danzer, W. Harrer, P. Supancic, T. Lube, Z. Wang, and A. Börger: J. Eur. Ceram. Soc., 2007, vol. 27(2–3), pp. 1481–85. https://doi.org/10.1016/j.jeurceramsoc.2006.05.03410.1016/j.jeurceramsoc.2006.05.034 ↗
48. A.M. Freudenthal: Fract. Adv. Treat., 1968, vol. II, pp. 591–619.
49. M. Staudacher, T. Lube, J. Schlacher, and P. Supancic: Open Ceram., 2021, vol. 6, p. 100101. https://doi.org/10.1016/j.oceram.2021.10010110.1016/j.oceram.2021.100101 ↗
50. V.K.I. Martin Hartmann: Brevier Technische Keramik, 4th edn., Fahner, Lauf, 2003.
51. R. Jain, J. Lock, and S.F. Duffy: in: Proceedings of the ASME Turbo Expo 2009. ASME, New York, NY, 2009. pp. 231–3910.1016/S1350-4789(09)70385-X ↗
52. M.F. Gazulla, M. Rodrigo, E. Blasco, and M. Orduña: X-Ray Spectrom., 2013, vol. 42(5), pp. 394–401. https://doi.org/10.1002/xrs.249010.1002/xrs.2490 ↗
53. P.J. Potts, J.F.W. Bowles S.J.B. Reed, and M.R. Cave, eds.: Microprobe Techniques in the Earth Sciences, Springer US, Boston, MA, 1995.10.1007/978-1-4615-2053-5 ↗
54. L.H. Liu, D.J. Michalak, T.P. Chopra, S.P. Pujari, W. Cabrera, D. Dick et al.: J. Phys. Condens. Matter., 2016, vol. 28(9), p. 094014. https://doi.org/10.1088/0953-8984/28/9/09401410.1088/0953-8984/28/9/094014 ↗