journal article·2022-12

Two-Parametric Nature of Fatigue and the Intrinsic Mechanisms

K. Sadananda, N. Iyyer, A. K. Vasudevan, M. Nani Babu, N. Phan

Publisher page

Abstract

Fatigue damage of structural materials is an age-old problem causing the premature failure of components in service. Fatigue requires two load parameters for quantification. For SN-fatigue, Goodman and others have used stress amplitude and mean stress. However, this two-parametric nature is ignored for fatigue crack growth. Instead, the extrinsic crack-closure concept was introduced by Elber in 1970 and has been used extensively since then. We consider the load-ratio effects are intrinsic to fatigue arising from its two-parametric nature. For S–N fatigue, stress range Δσ and maximum stress, σmax, and for crack growth, stress intensity factors, ΔK, and Kmax provide the required parameters. While the cyclic damage is governed by the amplitude, the monotonic modes enter via the maximum loads. The monotonic modes include environmental effects, corrosion fatigue, sustained load crack growth, hydrogen embrittlement, creep effects, transformation-induced plasticity, etc. Thus, the two parameters reflect the microstructural mechanisms contributing to the fatigue damage. We present a systematic analysis of the load-ratio effects of materials including metals and alloys, ceramics, and composites to show the universal application of the two-parametric nature of fatigue reflecting the material response and governing mechanisms, without the need to invoke any crack-closure arguments.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. J. Goodman: Mechanics Applied to Engineering, Longmans Green, London, 1899.
2. B.P. Haigh: J. Inst. Met., 1917, vol. 18, pp. 55–86.
3. J.O. Smith: University of Illinois, Engineering Experiment Station Bulletin, 1942, p.334
4. W. Elber: Eng. Fract. Mech., 1970, vol. 2, pp. 37–45. https://doi.org/10.1016/0013-7944(70)90028-7.10.1016/0013-7944(70)90028-7 ↗
5. J.C. Newman Jr. and W. Elver: ASTM STP 982, Mechanics of Fatigue Crack Closure, American Society of Testing and Materials, Philadelphia, 1988, p. 182.10.1520/STP982-EB ↗
6. J.K. Donald, G.H. Bray, and R.W. Bush: ASTM STP 1332, 29th National Symposium on Fatigue and Fracture Mechanics, T. L. Panontin, and S. D. Sheppard, Eds., American Society for Testing and Materials, Philadelphia, 1998.
7. B. Budiansky and J.W. Hitchinson: J. Appl. Mech., 1978, vol. 45, pp. 267–76.10.1115/1.3424286 ↗
8. J.C. Newman: ASTM STP 1343 Advances in Fatigue Crack Closure Measurement and Analysis: eds. R.C. McClung, and J.C. Newman, 1999, vol. 2, pp. 128–44.10.1520/STP15754S ↗
9. S. Suresh: Fatigue of Materials, 2nd ed. Cambridge University Press, Cambridge, 1998. https://doi.org/10.1017/CBO978051180657510.1017/CBO9780511806575 ↗
10. N. Louat, K. Sadananda, M. Duesbery, and A.K. Vasudevan: Metall. Trans. A, 1993, vol. 24, pp. 2225–32.10.1007/BF02648597 ↗
11. K. Sadananda and D.V. Ramaswamy: Role of crack tip plasticity in fatigue crack growth. Phil. Mag., 2001, vol. 81, pp. 1283–1303.10.1080/01418610108214441 ↗
12. K. Sadananda and G. Glinka: Phil. Mag., 2005, vol. 85, pp. 189–203.10.1080/14786430412331315653 ↗
13. C. Laird and G.C. Smith: Phil. Mag., 1962, vol. 8, pp. 847–57.10.1080/14786436208212674 ↗
14. P. Neuman: Acta Metall., 1974, vol. 22, pp. 1155–65.10.1016/0001-6160(74)90071-6 ↗
15. F.O. Riemelmoser and R. Pippan: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 1357–60.
16. K. Sadananda and A.K. Vasudevan: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1998, vol. 29, pp. 1359–60.
17. F.O. Riemelmoser and R. Pippan: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 1452–57.10.1007/s11661-999-0293-4 ↗
18. K. Sadananda and A.K. Vasudevan: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 1457–59.10.1007/s11661-999-0294-3 ↗
19. R.W. Lardner: Mathematical Theory of Dislocations and Fracture, University of Toronto Press, 1974.
20. I.H. Lin and R. Thomson: Acta Metall., 1986, vol. 34, pp. 187–206.10.1016/0001-6160(86)90191-4 ↗
21. D. Kujawski: Int. J. Fatigue, 2001, vol. 23, pp. 733–40. https://doi.org/10.1016/S0142-112301)00023-8.10.1016/S0142-112301)00023-8 ↗
22. J. Toribio and V. Kharin: Int. J. Fatigue, 2013, vol. 50, pp. 72–82.10.1016/j.ijfatigue.2012.02.019 ↗
23. M. Lang and G. Marci: ASTM STP 1332, Fatigue and Fracture Mechanics, Twenty-ninth Volume, T.L. Panontin, and S.D. Sheppard, Eds. American society for testing and Materials, West Conshohocken, PA, 1999, pp. 474–95
24. M. Lang: A Quantitative Investigation of Load Interaction Effects on Fatigue Crack Propagation, Ph.D. Thesis, University of Karlsruhe, Germany, 1996
25. S. Stoychev and D. Kujawski: Eng. Fract. Mech., 2008, vol. 75, pp. 2469–79.10.1016/j.engfracmech.2007.07.019 ↗
26. J.A.O. González, J.T.P. Castro, G.L.G. Gonzáles, M.A. Meggiolaro, and J.L.F. Freire: Int. J. Fatigue, 2020, vol. 136, p. 105577. https://doi.org/10.1016/j.ijfatigue.2020.105577.10.1016/j.ijfatigue.2020.105577 ↗
27. S.E. Ferreira, J.T.P. Castro, and M.A. Meggiolaro: Int. J. Fatigue, 2018, vol. 115, pp. 89–106. https://doi.org/10.1016/j.ijfatigue.2018.03.001.10.1016/j.ijfatigue.2018.03.001 ↗
28. K. Sadananda, M. Nani Babu, and A.K. Vasudevan: Mater. Sci. Eng. A, 2019, vol. 754, pp. 674–701.10.1016/j.msea.2019.03.102 ↗
29. D. Kujawski and S. Stoychev: Int. J. Fatigue, 2007, vol. 29, pp. 1744–2175.10.1016/j.ijfatigue.2006.12.004 ↗
30. J.O. Peters, B.L. Boyce, X. Chen, J.M. McNaney, J.W. Hutchinson, and R.O. Ritchie: Eng. Fract. Mech., 2002, vol. 69, pp. 1425–46.10.1016/S0013-7944(01)00152-7 ↗
31. ASM Handbook, Fatigue and Fracture, ASM International, Materials Park, OH, 1996, vol. 19.
32. D. Figueroa and M.J. Robinson: Corros. Sci., 2010, vol. 52, pp. 1593–602.10.1016/j.corsci.2010.01.001 ↗
33. K. Sadananda, J.H. Yang, N. Iyyer, N. Phan, and A. Rahman: Corros. Rev., 2021, vol. 39, pp. 487–517.10.1515/corrrev-2021-0038 ↗
34. K. Sadananda, A.K. Vasudevan, R.L. Holtz, and E.U. Lee: Int. J. Fatigue, 1999, vol. 21, pp. S233–46.10.1016/S0142-1123(99)00094-8 ↗
35. J.C Newman Jr., E.L. Anagnostou, and D. Rusk:, International Journal of Fatigue, 2014, vol. 62, pp.133–4310.1016/j.ijfatigue.2013.04.020 ↗
36. J.C. Newman jr.: Analysis of Fatigue crack growth database for use in a damage tolerance approach for aircraft propellers and rotorcraft, Report: DOT/FAA/AR-07/49, Air Traffic Organization Operations Planning, Office of Aviation Research and Development, Washington, DC 2059, U.S. Department of Transportation Federal Aviation Administration, 2007
37. J.H. Bulloch: Theor. Appl. Fract. Mech., 1992, vol. 18, pp. 15–30.10.1016/0167-8442(92)90003-G ↗
38. J.H. Bulloch: Theor. Appl. Fract. Mech., 1992, vol. 17, pp. 19–45.10.1016/0167-8442(92)90044-X ↗
39. R. Pippan and A. Hohenwarter: Fatigue Fract. Eng. Mater. Struct., 2017, vol. 40, pp. 471–95. https://doi.org/10.1111/ffe.12578.10.1111/ffe.12578 ↗
40. J. Maierhofer, H.P. Ganser, D. Simunek, M. Leitner, R. Pippan, and M. Luke: Int. J. Fatigue, 2020, vol. 132, p. 105377. https://doi.org/10.1016/j.ijfatigue.2019.105377EAIN-EA42.10.1016/j.ijfatigue.2019.105377EAIN-EA42 ↗
41. R.P. Gangloff: Environment Induced Cracking of Metals (EICM-2), Sergei Shipilov, ed., Elsevier Science, Oxford. 2006
42. P. Pokorny, T. Vojtek, L. Náhlík, and P. Hutar: Eng. Fract. Mech., 2017, vol. 185, pp. 2–19. https://doi.org/10.1016/j.engfracmech.2017.02.013.10.1016/j.engfracmech.2017.02.013 ↗
43. G.B. Olson: Journal de Physics IV, Proceedings, EDP Sciences, 1996, vol. 6, C1-407-C1-418. https://doi.org/10.1051/jp4:199613910.1051/jp4:1996139 ↗
44. Z. Mei and J.W. Morris: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 3137–52. https://doi.org/10.1007/BF02647310.10.1007/BF02647310 ↗
45. D.F. Martelo, A. Mateo, and M.D. Chapetti: Int. J. Fatigue, 2015, vol. 77, pp. 64–77. https://doi.org/10.1016/j.ijfatigue.2015.02.016.10.1016/j.ijfatigue.2015.02.016 ↗
46. B.L. Boyce and R.O. Ritchie: Engr. Frac. Mech., 2001, vol. 68, pp. 129–47.10.1016/S0013-7944(00)00099-0 ↗
47. M. Lang, G.A. Hartman, and J.M. Larsen: Scr. Mater., 1998, vol. 12, p. 1803.10.1016/S1359-6462(98)00120-1 ↗
48. C. Sarrazin-Baudoux, Y. Chabanne, and J. Petit, ASTM STP 1372, J.C. Newman, Jr. and R.S. Piasick, Eds., ASTM, Philadelphia, 2000, pp. 341–60
49. K. Sadananda and P. Shahinian, in Cavities and Cracks in Creep and Fatigue, ed., J. Gittus, Applied Science Publishers, Ltd, 1981, pp. 109–95
50. G. Onofrio, G.A, Osinkolu, and M. Marchionni: International Journal of Fatigue, 2001, vol. 23, pp. 887–9510.1016/S0142-1123(01)00053-6 ↗
51. K. Badrinarayan, A.L. McKelvey, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3781–92.10.1007/BF02595627 ↗
52. K. Sadananda, C.R. Feng, H. Jones, and J. Petrovic: Mats. Sci. Engi. A, 1992, vol. 155, pp. 227–39.10.1016/0921-5093(92)90329-Y ↗
53. L.X. Han and S. Suresh: J. Am. Ceram. Soc., 1989, vol. 72, pp. 1233–38.10.1111/j.1151-2916.1989.tb09713.x ↗
54. R.H. Dauskardt, D.K. Veirs, and R.O. Ritchie: J. Am. Ceram. Soc., 1989, vol. 72, pp. 1124–30.10.1111/j.1151-2916.1989.tb09694.x ↗
55. J. Papuga, I. Vízková, M. Lutovinov, and M. Nesládek: in Fatigue 2018, MATEC Web of Conferences, 2018, vol. 165, pp. 1–8, https://doi.org/10.1051/matecconf/20181651001810.1051/matecconf/201816510018 ↗