journal article·2022-11

Influence of Tempering on Macro- and Micro-Residual Stresses and Yield Stress of Ferritic-Pearlitic Drawn, Coiled, and Straightened Wires

Marina Lukas, Michael Mayer, Andreas Stark, Bernhard Friessnegger, Thomas Hönigmann, Matthew Galler, Gerald Ressel

Publisher page

Abstract

Residual stresses caused by different deformation steps during the processing of wiressignificantly affect the mechanical properties of the final product. However, in the literature,there is a lack of detailed information about their correlation with mechanical properties.Therefore, the proposed work focuses on the influence of tempering on the macro- andmicro-residual stresses, and related mechanical properties of a ferritic-pearlitic 27MnSiVS6 steelwire in the deformed state after hot rolling, drawing, coiling, and straightening. Characterizationof the wire in the deformed state indicates macro-residual stresses that remain high aftertempering at a temperature of 400 C for 10 minutes and decrease significantly after temperingat 475 C for 10 minutes. In situ high-energy X-ray diffraction measurements during heating ofwires in the deformed state reveal that micro-residual stresses remain unchanged up totemperatures of 200 C, while they decrease at 300 C. Investigations of the mechanicalproperties show that a reduction of micro-residual stresses correlates with a reduction of thecurvature of the stress–strain curve below the yield point, which increases the yield stress.Conversely, the reduction of macro-residual stresses begins in the temperature regime ofrecovery and relaxation, where a reduction of yield stress and tensile strength occurs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. J.M. Atienza and M. Elices: Mater. Struct., 2004, vol. 37, pp. 301–04.10.1007/BF02481675 ↗
2. C. Borchers and R. Kirchheim: Prog. Mater. Sci., 2016, vol. 82, pp. 405–44.10.1016/j.pmatsci.2016.06.001 ↗
3. M.R. Ripoll, S.M. Weygand, and H. Riedel: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 3064–72.10.1016/j.msea.2010.01.079 ↗
4. J.M. Atienza and M. Elices: Mater. Struct., 2003, vol. 36, pp. 548–52.10.1007/BF02480832 ↗
5. P. Withers and H.D.K.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
6. U. Wolfstieg and E. Macherauch: Chemie-lng.-Techn., 1973, vol. 45, pp. 760–70.
7. M. Jandera and J. Machacek: Thin-Walled Structures, 2014, vol. 83, pp. 12–18, 2014.10.1016/j.tws.2014.03.013 ↗
8. W. Liu, K.J.R. Rasmussen, and H. Zhang: Eng. Struct., 2017, vol. 150, pp. 986–95.10.1016/j.engstruct.2017.08.004 ↗
9. J. Ruiz-Hervias, J.M. Atienza, M. Elices, and E.C. Oliver: Mater. Sci. Eng. A, 2008, vol. 480A, pp. 439–48.10.1016/j.msea.2007.07.017 ↗
10. A. Durgaprasad, S. Gire, S. Lenka, S. Kundu, S. Mishra, S. Chandra, D.R. Doherty and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4583–97.10.1007/s11661-017-4269-5 ↗
11. M. Jandera, L. Gardner, and J. Machacek: J. Constr. Steel Res., 2008, vol. 64, pp. 1255–63.10.1016/j.jcsr.2008.07.022 ↗
12. A.D. Aloraier, S. Joshi, J.W.H. Price, and K. Alawadhi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2030–37.10.1007/s11661-013-2170-4 ↗
13. G. Totten, M. Howes and T. Inoue: Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park Ohio, 2002, pp.54–69.
14. A.G. Kostryzhev: Bauschinger Effect In Nb And V Microalloyed Line Pipe Steels, PhD Theses, School of Metallurgy and Materials, Birmingham, 2009.10.1179/174328109X401532 ↗
15. S. Wesselmecking, M. Haupt, Y. Ma, W. Song, G. Hirt, and W. Bleck: Mater. Sci. Eng. A, 2021, vol. 828, p. 142056. https://doi.org/10.1016/j.msea.2021.142056.10.1016/j.msea.2021.142056 ↗
16. S. Lin, A. Borgenstam, A. Stark, and P. Hedström: Mater. Charact., 2022, vol. 185, p. 111774. https://doi.org/10.1016/j.matchar.2022.111774.10.1016/j.matchar.2022.111774 ↗
17. M.L. Martinez-Perez, C.R. Borlando, F.J. Mompean, M. Hernandez-Garcia, J. Ruiz-Hervias, J.M. Atienza, M. Elices, R.L. Peng, and M.R. Daymond: Acta Mater., 2005, vol. 53, pp. 4415–25.10.1016/j.actamat.2005.05.039 ↗
18. DIN EN ISO 643, Mikrophotographische Bestimmung der scheinbaren Korngröße, 2003.
19. N. Schell, K. Andrew, B. Felix, T. Fischer, M. Müller, and A. Scheyrer: Mater. Sci. Forum, 2014, vol. 772, pp. 57–61.10.4028/www.scientific.net/MSF.772.57 ↗
20. A.P. Hammersley: FIT2D V10.3 Reference Manual V4.0 ESRF98HA01T, ESRF, 1998.
21. G. Caglioti, A. Paoletti, and F. Ricci: Nucl. Instrum., 1958, vol. 3(4), pp. 223–28.10.1016/0369-643X(58)90029-X ↗
22. D. Balzar and H. Ledbetter: Adv. X-ray Anal., 1995, vol. 38, pp. 397–404.
23. Diffrac.Suite User Manual Topas 5 Technical Reference, Bruker AXS GmbH, Germany, 2014.
24. S.M.C. Bohemen: Scr. Mater., 2013, vol. 69, pp. 315–18.10.1016/j.scriptamat.2013.05.009 ↗
25. B. Cullity and S.R. Stock: X-ray-Diffraction, 3rd ed. Prentice Hall, New Jersey, 2001.
26. C. Garcia-Mateo and F.G. Caballero: ISIJ Int., 2005, vol. 45, pp. 1736–40.10.2355/isijinternational.45.1736 ↗
27. W. Bergmann: Werkstofftechnik 1, Carl Hanser Verlag München, 6th edition, 2008, pp. 123–27.
28. M.A. Vicente Alvarez, M. Bergant, and T. Perez: Mater. Sci. Eng. A, vol. 527A, pp. 5939–46.10.1016/j.msea.2010.06.010 ↗
29. M. Moreno, J. Teixeira, G. Geandier, J.-C. Hell, F. Bonnet, M. Salib, and S. Allain: Metals, 2019, vol. 9, pp. 1–3. https://doi.org/10.3390/met9010008.10.3390/met9010008 ↗
30. A. Vieweg, E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, and E. Kozeschnik: Mater. Des., 2017, vol. 136, pp. 214–22.10.1016/j.matdes.2017.09.065 ↗
31. J. Bauschinger: Mittheilungen aus dem mechanisch-technischen Laboratorium, München, 1886.
32. E. Hemmerich, B. Rolfe, P. Hodgson, and M. Weiss: Mater. Sci. Eng. A, 2011, vol. 528A, pp. 3302–09.10.1016/j.msea.2010.12.035 ↗
33. M.E. Kassner, P. Geantil, L.E. Levine, and B.C. Larson: Mater. Sci. Forum, 2009, vol. 604–605, pp. 39–51.
34. C.C. Li, J.D. Flasck, J.A. Yaker, and W. Leslie: Metall. Mater. Trans. A, 1978, vol. 9A, pp. 85–89.10.1007/BF02647175 ↗