Numerical Modeling of Gas Tungsten Arc Welding of a Newly Developed Cobalt-Based Superalloy
Source abstract
Abstract
A three-dimensional finite-element thermal model with a volumetric moving heat source is developed to simulate the gas tungsten arc welding process of a newly developed cobalt-based superalloy, CoWAlloy1. The model shows that the geometry of the molten weld pool can be significantly influenced by the welding speed. A numerical analysis is conducted with the model to calculate the cooling rate, thermal gradient, and solidification growth rate at various regions of the fusion zone for different welding speeds. The cooling rate is found to increase from the weld fusion boundary to the centreline region of the FZ at all welding speeds. A columnar-equiaxed microstructure is formed at the centreline of the FZ region and the extent of the columnar microstructure is reduced with an increase in the welding speed. Therefore, a high welding speed facilitates the formation of a fully equiaxed grain structure in the FZ of the alloy. Experimental work with CoWAlloy1 is used to validate the theoretical predictions made by the model and a good agreement is found between the experimental and modeled results, which confirms the robustness of the model used in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S. Neumeier, L.P. Freund, and M. Göken: Scr. Mater., 2015, vol. 109, pp. 104–07.10.1016/j.scriptamat.2015.07.030 ↗
2. L.P. Freund, S. Giese, D. Schwimmer, H.W. Höppel, S. Neumeier, and M. Göken: J. Mater. Res., 2017, vol. 32, pp. 4475–82.10.1557/jmr.2017.315 ↗
3. J. Chen, E. Salvati, F. Uzun, C. Papadaki, Z. Wang, J. Everaerts, and A.M. Korsunsky: J. Manuf. Process., 2020, vol. 53, pp. 190–200.10.1016/j.jmapro.2020.02.007 ↗
4. E.A. Bonifaz and N.L. Richards: Acta Mater., 2009, vol. 57, pp. 1785–94.10.1016/j.actamat.2008.12.022 ↗
5. S. Lampman: Weld Integrity and Performance, ASM International, 1997.10.31399/asm.tb.wip.9781627083591 ↗
6. X. Xue and L. Xu: Mater. Sci. Eng. A., 2009, vol. 499, pp. 69–73.10.1016/j.msea.2007.12.052 ↗
7. M.M. Franke, R.M. Hilbinger, C.H. Konrad, U. Glatzel, and R.F. Singer: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 1847–53.10.1007/s11661-010-0585-8 ↗
8. H.L.Y. Mei, Y. Liu, C. Liu, C. Li, L. Yu, and Q. Guo: Mater. Des., 2016, vol. 89, pp. 964–77.10.1016/j.matdes.2015.10.082 ↗
9. G. Li, X. Lu, X. Zhu, J. Huang, L. Liu, and Y. Wu: Opt. Laser Technol., 2017, vol. 94, pp. 97–105.10.1016/j.optlastec.2017.02.005 ↗
10. K.S. Bal, J. Dutta Majumdar, and A. Roy Choudhury: Optik (Stuttg)., 2019, vol. 183, pp. 355–66.10.1016/j.ijleo.2019.02.084 ↗
11. W. Kurz, C. Bezençon, and M. Gäumann: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 185–91.10.1016/S1468-6996(01)00047-X ↗
12. J.W. Park, S.S. Babu, J.M. Vitek, E.A. Kenik, and S.A. David: J. Appl. Phys., 2003, vol. 94, pp. 4203–209.10.1063/1.1602950 ↗
13. J.M. Vitek: Acta Mater., 2005, vol. 53, pp. 53–67.10.1016/j.actamat.2004.08.039 ↗
14. P. Schempp and M. Rethmeier: Weld. World., 2015, vol. 59, pp. 767–84.10.1007/s40194-015-0251-2 ↗
15. S.S. Babu, N. Raghavan, J. Raplee, S.J. Foster, C. Frederick, M. Haines, R. Dinwiddie, M.K. Kirka, A. Plotkowski, Y. Lee, and R.R. Dehoff: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 3764–80.10.1007/s11661-018-4702-4 ↗
16. M. Haines, A. Plotkowski, C.L. Frederick, E.J. Schwalbach, and S.S. Babu: Comput. Mater. Sci., 2018, vol. 155, pp. 340–49.10.1016/j.commatsci.2018.08.064 ↗
17. M.J. Bermingham, D.H. StJohn, J. Krynen, S. Tedman-Jones, and M.S. Dargusch: Acta Mater., 2019, vol. 168, pp. 261–74.10.1016/j.actamat.2019.02.020 ↗
18. S. Geng, P. Jiang, X. Shao, L. Guo, and X. Gao: J. Mater. Sci. Technol., 2020, vol. 46, pp. 50–63.10.1016/j.jmst.2019.10.027 ↗
19. H.L. Wei, J.W. Elmer, and T. Debroy: Acta Mater., 2016, vol. 115, pp. 123–31.10.1016/j.actamat.2016.05.057 ↗
20. A. Farzadi, S. Serajzadeh, and A.H. Kokabi: Int. J. Therm. Sci., 2010, vol. 49, pp. 809–19.10.1016/j.ijthermalsci.2009.11.007 ↗
21. R. Ghanavati and H. Naffakh-Moosavy: J. Mater. Res. Technol., 2021, vol. 13, pp. 1628–64. .10.1016/j.jmrt.2021.05.022 ↗
22. T.F. Flint, J.A. Francis, M.C. Smith, and J. Balakrishnan: J. Mater. Process. Technol., 2017, vol. 246, pp. 123–35.10.1016/j.jmatprotec.2017.02.002 ↗
23. G.F. Sun, Z.D. Wang, Y. Lu, R. Zhou, Z.H. Ni, X. Gu, and Z.G. Wang: J. Manuf. Process., 2018, vol. 34, pp. 106–20.10.1016/j.jmapro.2018.05.023 ↗
24. X. Shan, C.M. Davies, T. Wangsdan, N.P. O’Dowd, and K.M. Nikbin: Int. J. Press. Vessel. Pip., 2009, vol. 86, pp. 110–21.10.1016/j.ijpvp.2008.11.005 ↗
25. J. Ahn, E. He, L. Chen, R.C. Wimpory, J.P. Dear, and C.M. Davies: Mater. Des., 2017, vol. 115, pp. 441–57.10.1016/j.matdes.2016.11.078 ↗
26. M. Zain-ul-abdein, D. Nélias, J.F. Jullien, F. Boitout, L. Dischert, and X. Noe: Int. J. Press. Vessel. Pip., 2011, vol. 88, pp. 45–56.10.1016/j.ijpvp.2010.10.008 ↗
27. A. Ghosh, A. Yadav, and A. Kumar: J. Mater. Process. Technol., 2017, vol. 239, pp. 52–65.10.1016/j.jmatprotec.2016.08.010 ↗
28. M. Gäumann, C. Bezençon, P. Canalis, and W. Kurz: Acta Mater., 2001, vol. 49, pp. 1051–62.10.1016/S1359-6454(00)00367-0 ↗
29. Y.K. Liu and Y.M. Zhang: Control Eng. Pract., 2013, vol. 21, pp. 1469–80.10.1016/j.conengprac.2013.06.019 ↗
30. R. Sudhakaran, V. Vel-Murugan, and P.S. Sivasakthivel: J. Eng. Res., 2012, vol. 9, pp. 64–79.
31. H.N. Moosavy, M.R. Aboutalebi, and S.H. Seyedein: J. Mater. Process. Technol., 2012, vol. 212, pp. 2210–18.10.1016/j.jmatprotec.2012.06.010 ↗
32. N. Coniglio and C.E. Cross: Int. J. Adv. Manuf. Technol., 2020, vol. 107, pp. 5011–23.10.1007/s00170-020-05231-y ↗
33. Z. Li, G. Yu, X. He, S. Li, and Y. Zhao: Metals (Basel)., 2018, https://doi.org/10.3390/met8100799.10.3390/met8100799 ↗
34. K.R. Vishwakarma, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Eng. A., 2008, vol. 480, pp. 517–28.10.1016/j.msea.2007.08.002 ↗
35. R. Han, S. Lu, W. Dong, D. Li, and Y. Li: ISIJ Int., 2016, vol. 56, pp. 1003–12.10.2355/isijinternational.ISIJINT-2015-738 ↗
36. S. Kou: Welding Metallurgy, 2edn. Wiley, Hoboken, NJ, 2002.10.1002/0471434027 ↗
37. J. Ahn, E. He, L. Chen, J. Dear, Z. Shao, and C. Davies: Int. J. Light. Mater. Manuf., 2018, vol. 1, pp. 179–88.
38. V. Villaret, F. Deschaux-Beaume, and C. Bordreuil: J. Mater. Process. Technol., 2016, vol. 233, pp. 115–24.10.1016/j.jmatprotec.2016.02.017 ↗