journal article·2021-07

Experimental Calibration & Multi-scale Simulation of Multi-modal γ′ Precipitation in Nickel Superalloys During Continuous Cooling

Nicholas J. Krutz, Chen Shen, Carolin Fink, Jiashi Miao, Timothy Hanlon, Wei Zhang, Boian Alexandrov, Michael J. Mills

Publisher page

Abstract

The precipitation of a recently introduced γ′-strengthened, Powder Metallurgy (PM) nickel superalloy is characterized and modeled. A range of experimental techniques are employed to capture aspects of the alloy microstructure necessary to calibrate a supersolvus, continuous cooling precipitation model. The proposed precipitation model framework incorporates a computationally efficient addition to the classical mean-field modeling approach that increases its ability to model dynamic, multi-modal γ′ burst events. The γ′ size predicted by the model shows good agreement with the experimental results spanning several orders of cooling rate magnitudes. The scalability of the modeling framework is then demonstrated in a quench trial on a diskette made from another PM nickel superalloy. The precipitation calculation is applied to the element integration points of a continuum Finite Element (FE) heat conduction simulation, where the latent heat generated from the precipitate evolution is accounted for. The results are compared to experimental findings using embedded thermocouple measurements and indicate that this approach is suitable for quantifying effects of γ′ precipitate evolution at the meso-scale and continuum length scales.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. R. Radis, M. Schaffer, M. Albu, G. Kotheitner, G. Pölt, E. Kozeschnik: Acta Mater., 2009, 57(19), pp. 5739-5747.10.1016/j.actamat.2009.08.002 ↗
2. C. Papadaki, W. Li, A.M. Korunski: Materials, 2018, 11(9), p. 1528.10.3390/ma11091528 ↗
3. M.P. Jackson, R.C Reed (1999) Mater Sci Eng A 259(1), 85-9710.1016/S0921-5093(98)00867-3 ↗
4. P.M. Sarosi, B. Wang, J.P. Simmons, Y. Wang, M.J. Mills: Scr. Mater., 2007, 57(8), pp. 767-770.10.1016/j.scriptamat.2007.06.014 ↗
5. J. Mao, K.M. Chang, W. Yang, K. Ray, S.P. Vaze, D.U. Ferrer: Metall. Trans. A, 2001, 32(10), pp. 2441-2452.10.1007/s11661-001-0034-9 ↗
6. J. Mao, J., K.M. Chang, W. Yang, D.U. Furrer, K. Ray, S.P. Vaze: Mater. Sci. Eng., A, 2002, 332(1-2), pp. 318-329.
7. M. Li, M., J. Coakley, D. Isheim, G. Tian, B. Shollock: J. Alloys Compd., 2018, 732, pp. 765-776.10.1016/j.jallcom.2017.10.263 ↗
8. S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, O.N. Senkov, J.S. Tiley: Metall. Trans. A, 2018, 49(12), pp. 6265-6276.
9. R. J. Mitchell, M.C. Hardy, M. Preuss, S. Tin: Superalloys 2004, Proc. Int. Symp., 10th, pp. 361-370.10.7449/2004/Superalloys_2004_361_370 ↗
10. R.R. Unocic, L. Kovarik, C. Shen, P.M. Sarosi, Y. Wang, Y., J. Li, S. Ghosh, M.J. Mills: Superalloys 2008, Proc. Int. Symp., 11th, p. 377.10.7449/2008/Superalloys_2008_377_385 ↗
11. H. Wu, J. Li, F. Liu, L. Huang, X. Zeng, Q. Fang, Q., Z. Huang, L. Jiang: Mater. Des., 2017, 128, pp. 176-181.10.1016/j.matdes.2017.05.025 ↗
12. N. Gayraud, F. Moret, X. Baillin, P.E. Mosser: J. Phys. IV, 1993, 3(C7), p. C7-271.
13. T.P. Gabb, D.G. Backman, D.Y. Wei, D. P. Mourer, D. Furrer, A. Garg, D.L. Ellis: Superalloys 2000, Proc. Int. Symp., 9th, pp. 405-414.10.7449/2000/Superalloys_2000_405_414 ↗
14. H. J. Jou, P. Voorhees, G.B. Olson: Superalloys 2004, Proc. Int. Symp., 10th, pp. 877-886.10.7449/2004/Superalloys_2004_877_886 ↗
15. G.B. Olson, H.J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci, D. Hull: Superalloys 2008, Proc. Int. Symp., 11th, p. 923.10.7449/2008/Superalloys_2008_923_932 ↗
16. S.L. Semiatin, S. L. Kim, F. Zhang, J.S. Tiley: Metall. Trans. A, 2015, 46(4), pp. 1715-1730.10.1007/s11661-015-2748-0 ↗
17. S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, D.U. Furrer: Integr. Mater. Manuf. Innov., 2016, 5(1), pp. 41-60.10.1186/s40192-016-0046-3 ↗
18. S.L. Semiatin, N.C Levkulich, J. S. Tiley: Metall. Trans. A, 2019, 50(11), pp. 5281-5296.
19. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux: Sci. Rep., 2016, 6(1), pp. 1-16.10.1038/srep28650 ↗
20. C. Shen, Modeling Creep-Fatigue-Environment Interactions in Steam Turbine Rotor Materials for Advanced Ultra-supercritical Coal Power Plants (2014), https://www.osti.gov/servlets/purl/1134364.10.2172/1134364 ↗
21. M.J. Anderson, F. Schulz, Y. Lu, H. S. Kitaguchi, P. Bowen, C. Argyrakis, H.C. Basoalto: Acta Mater., 2020.
22. Q. Chen, K. Wu, G. Sterner, P. Mason:. J. Mater. Eng. Perform., 2014, 23(12), pp. 4193-4196.10.1007/s11665-014-1255-6 ↗
23. W. Cao, F. Zhang, S. L. Chen, C. Zhang, J. Zhu, S .L. Semiatin, J. S. Tiley: J. Phase Equilib. Diffus., 2016, 37(4), pp. 491-502.10.1007/s11669-016-0481-z ↗
24. M. Perrut, D. Locq: MATEC Web Conf., 2014, 14, p. 09004.10.1051/matecconf/20141409004 ↗
25. T. Gabb, J. Gayda, D.F. Johnson, R.A. MacKay, R.B. Rogers, C.K. Sudbrack, A. Garg, I.E. Locci, S.L Semiatin: NASA Report, 2016-218936, 2016.
26. T.M. Smith: Ph.D. Thesis, The Ohio State University, 2016.
27. A. Powell, K. Bain, A. Wessman, D. Wei, T. Hanlon, D. Mourer: Superalloys 2016 Proc. Int. Symp., 13th, pp. 187-197.10.1002/9781119075646.ch21 ↗
28. [28] B.T. Alexandrov, J. C. Lippold: Weld. World, 2007, 51(11-12), 48-59.10.1007/BF03266608 ↗
29. J. M. Sosa, D. E. Huber, B. Welk, H. L. Fraser: Integr. Mater. Manuf. Innov., 2014, 3(1), p. 1010.1186/2193-9772-3-10 ↗
30. S.A. Croxall, M.C. Hardy, H.J. Stone, P.A. Midgley: Int. Conf. 3D Mater. Sci., 1st, 2012, pp. 215-22010.1007/978-3-319-48762-5_33 ↗
31. M. Perez, M. Dumont, D. Acevedo-Reyes: Acta Mater., 2008, 56(9), 2119-2132.10.1016/j.actamat.2007.12.050 ↗
32. R.W. Cahn, P. Haasen: Physical Metallurgy, 4th ed., Elsevier BV, 1996, pp. 1363-1505.10.1017/CBO9781107295551 ↗
33. D.A. Porter, K.E. Easterling, M.Y. Sherif: Phase Transformations in Metals and Alloys. CRC press, Boca Raton, 2009.
34. R. Kampmann, R. Wagner: Decomposition of Alloys: The Early Stages, 1983, 24: 91-103.
35. M. Perez: Scr. Mater., 2005, 52(8), 709-712.10.1016/j.scriptamat.2004.12.026 ↗
36. A.R.P. Singh, S. Nag, S. Chattopadhyay, Y. Ren, J. Tiley, G.B. Viswanathan, H.L. Fraser, R. Banerjee: Acta Mater., 2013, 61(1), pp. 280-293.10.1016/j.actamat.2012.09.058 ↗
37. P. Maugis, M. Gouné: Acta Mater., 2005, 53(12), 3359-3367.10.1016/j.actamat.2005.03.036 ↗
38. K.C. Mills, Y.M. Youssef, Z. Li, Y. Su: ISIJ Int., 2006, 46(5), pp. 623-632.10.2355/isijinternational.46.623 ↗
39. P.K. Agarwal, J. K. Brimacombe: Metall. Trans. B, 1981, 12(1), pp. 121-133.
40. T.P. Gabb, J. Gayda, J. Telesman, P.T. Kantzos: NASA Report, 20050186902, 2005.
41. E.J. Payton EJ: Ph.D. Thesis, The Ohio State University, 2009.
42. R.A. Ricks, A.J. Porter, R.C. Ecob: Acta Metall., 1983, 31(1), pp. 43-53.10.1016/0001-6160(83)90062-7 ↗
43. Y.S. Yoo, D.Y. Yoon, A.M. Henry: Metals and Materials, 1995, 1(1), pp. 47-61.10.1007/BF03055324 ↗
44. N. Krutz, C. Shen, M. Karadge, A.J. Egan, J.R. Bennett, T. Hanlon, M.J. Mills: Superalloys 2020 Proc. Int. Symp., 14th, pp. 691-701.10.1007/978-3-030-51834-9_67 ↗
45. D.M. Collins, N. D’Souza, C. Panwisawas, C. Papadaki, G.D. West, A. Kostka, P. Kontis: Acta Mater., 2020, 200, pp. 959-970.10.1016/j.actamat.2020.09.055 ↗