journal article·2019-12

Transmission Electron Microscopy Studies of Plasma Arc-Welded DP600 Dual-Phase Steel in Keyhole Mode

Amit A. Kuril, M. Jagannatham, G. D. Janaki Ram, Srinivasa R. Bakshi

Publisher page

Abstract

Microstructural characteristics of keyhole plasma arc-welded DP600 steel were analyzed using optical microscopy, scanning electron microscopy, and analytical transmission electron microscopy. The fusion zone (FZ) was observed to consist of allotriomorphic, Widmanstatten, and acicular ferrite along with bainite and martensite leading to enhancement in the hardness compared with the base metal. The coarse-grain HAZ consisted of bainite and martensite, while the fine-grain HAZ consisted of bainitic ferrite and tempered martensite. The sub-critical HAZ was found to consist of tempered martensite with reduced density of dislocations and carbide precipitation. This softening resulted in yield point phenomena and failure in the sub-critical HAZ during the transverse tensile test of welds. The non-isothermal tempering resulted in retarded cementite precipitation due to inadequate time for diffusion of carbon, which led to the lowest hardness of 168 HV0.5 in the sub-critical HAZ. The different features in the FZ and HAZ and their correlation with mechanical properties are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Y. Liu, D. Dong, L. Wang, X. Chu, P. Wang, and M. Jin: Mater. Sci. Eng. A, 2015, vol. 627, pp. 296–305.10.1016/j.msea.2014.12.103 ↗
2. D. Dong, Y. Liu, Y. Yang, J. Li, M. Ma, and T. Jiang: Mater. Sci. Eng. A, 2014, vol. 594, pp. 17–25.10.1016/j.msea.2013.11.047 ↗
3. R. Ashiri, H. Mostaan, and Y. D. Park: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, vol. 49A, pp. 6161–72.10.1007/s11661-018-4900-0 ↗
4. R. Ashiri, M.A. Haque, C.W. Ji, M. Shamanian, H.R. Salimijazi, and Y. Do Park: Scr. Mater., 2015, vol. 109, pp. 6–10.10.1016/j.scriptamat.2015.07.006 ↗
5. R. Ashiri, M. Shamanian, H.R. Salimijazi, M.A. Haque, J.H. Bae, C.W. Ji, K.G. Chin, and Y. Do Park: Scr. Mater., 2016, vol. 114, pp. 41–7.10.1016/j.scriptamat.2015.11.027 ↗
6. M.R.U. Ahsan, Y.R. Kim, C.H. Kim, J.W. Kim, R. Ashiri, and Y.D. Park: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 209–15.10.1179/1362171815Y.0000000084 ↗
7. S. Li, Y. Kang, G. Zhu, and S. Kuang: Mater. Des., 2015, vol. 85, pp. 180–9.10.1016/j.matdes.2015.06.083 ↗
8. H. Ashrafi, M. Shamanian, R. Emadi, and N. Saeidi: J. Mater. Eng. Perform., 2017, vol. 26, pp. 1414–23.10.1007/s11665-017-2544-7 ↗
9. G.K. Ahiale, Y.-J. Oh, W.-D. Choi, K.-B. Lee, J.-G. Jung, and S.W. Nam: Met. Mater. Int., 2013, vol. 19, pp. 933–9.10.1007/s12540-013-5005-3 ↗
10. N. Sreenivasan, M. Xia, S. Lawson, and Y. Zhou: J. Eng. Mater. Technol., 2008, vol. 130, p. 041004.10.1115/1.2969246 ↗
11. S.K. Panda, N. Sreenivasan, M.L. Kuntz, and Y. Zhou: J. Eng. Mater. Technol., 2008, vol. 130, p. 041003.10.1115/1.2969256 ↗
12. J.H. Lee, S.H. Park, H.S. Kwon, G.S. Kim, and C.S. Lee: Mater. Des., 2014, vol. 64, pp. 559–65.10.1016/j.matdes.2014.07.065 ↗
13. J. Wang, L. Yang, M. Sun, T. Liu, and H. Li: Mater. Des., 2016, vol. 97, pp. 118–25.10.1016/j.matdes.2016.02.071 ↗
14. V.H. Baltazar, S.S. Nayak, and Y. Zhou: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3115–29.10.1007/s11661-011-0739-3 ↗
15. A.A. Kuril, G.D.J. Ram, and S.R. Bakshi: J. Mater. Process. Technol., 2019, vol. 270, pp. 28–36.10.1016/j.jmatprotec.2019.02.018 ↗
16. C.N. Li, G. Yuan, F.Q. Ji, D.S. Ren, and G.D. Wang: Mater. Sci. Eng. A, 2016, vol. 665, pp. 98–107.10.1016/j.msea.2016.04.038 ↗
17. J. Moerman, P.R. Triguero, C. Tasan, and P. van Liempt: Mater. Sci. Forum, 2011, vol. 702–703, pp. 485–8.10.4028/www.scientific.net/MSF.702-703.485 ↗
18. S. Gündüz and A. Tosun: Mater. Des., 2008, vol. 29, pp. 1914–8.10.1016/j.matdes.2008.04.028 ↗
19. J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, and M. Calcagnotto: Acta Mater., 2011, vol. 59, pp. 4387–94.10.1016/j.actamat.2011.03.062 ↗
20. J.K. Martikainen and T.J.I. Moisio: Weld. J. - Weld. Res. Suppl., 1993, 72, pp. 329–40.
21. S. SalimiBeni, M. Atapour, M.R. Salmani, and R. Ashiri: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 2218–34.10.1007/s11661-019-05146-8 ↗
22. C.B. Dallum and D.L. Olson: Weld. J. Res. Suppl., 1989, vol. 68, pp. 198-205.
23. H.K.D.H. Bhadeshia and L.E. Svensson: Math. Model. Weld Phenomena, H. Cerjak E.K. Easterling, eds., Inst. Mater. London, 1993, pp. 109–82.
24. R.D.K. Misra, H. Nathani, J.E. Hartmann, and F. Siciliano: Mater. Sci. Eng. A, 2005, vol. 394, pp. 339–52.10.1016/j.msea.2004.11.041 ↗
25. K. Ichikawa, Y. Horii, R. Motomatsu, M. Yamaguchi, and N. Yurioka: J. Japan Weld. Soc., 1996, vol. 14, pp. 27–32.10.2207/qjjws.14.27 ↗
26. S. Okaguchi, H. Ohtani, and Y. Ohmori: Mater. Trans., 1991, vol. 32, pp. 697–704.10.2320/matertrans1989.32.697 ↗
27. Y. Ohmori, H. Ohtsubo, Y.C. Jung, S. Okaguchi, and H. Ohtani: Metall. Mater. Trans. A, 1994, vol. 25, pp. 1981–9.10.1007/BF02649046 ↗
28. J. Hu, L.X. Du, M. Zang, S.J. Yin, Y.G. Wang, X.Y. Qi, X.H. Gao, and R.D.K. Misra: Mater. Charact., 2016, vol. 118, pp. 446–53.10.1016/j.matchar.2016.06.027 ↗
29. J.R. Yang, Huang C Y, and Huang C F: J. Mater. Sci. Lett., 1993, vol. 12, pp. 1290–3.10.1007/BF00506341 ↗
30. H.K.D.H. Bhadeshia: PhD Thesis. University of Cambridge, 1979.
31. J. Wang and S. Van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
32. X.J. Liang, M.J. Hua, and A.J. DeArdo: Mater. Sci. Forum, 2014, vol. 783–786, pp. 704–12.10.4028/www.scientific.net/MSF.783-786.704 ↗
33. J. Kobayashi, S.-M. Song, and K. Sugimoto: ISIJ Int., 2012, vol. 52, pp. 1124–9.10.2355/isijinternational.52.1124 ↗
34. N.-R. V. Bangaru and A.K. Sachdev: Metall. Trans. A, 1982, vol. 13A, pp. 1899–906.10.1007/BF02645933 ↗
35. J. Smalc-Koziorowska, E. Jezierska, and W. Świątnicki: Solid State Phenom., 2012, vol. 186, pp. 301–4.10.4028/www.scientific.net/SSP.186.301 ↗
36. H. Beladi, I.B. Timokhina, P.D. Hodgson, and Y. Adachi: Scr. Mater., 2009, vol. 60, pp. 455–8.10.1016/j.scriptamat.2008.11.030 ↗
37. F.G. Caballero, M.K. Miller, and C. Garcia-Mateo: Mater. Chem. Phys., 2014, vol. 146, pp. 50–7.10.1016/j.matchemphys.2014.02.041 ↗
38. M.Y. Tu, C.A. Hsu, W.H. Wang, and Y.F. Hsu: Mater. Chem. Phys., 2008, vol. 107, pp. 418–25.10.1016/j.matchemphys.2007.08.017 ↗
39. T. Furuhara, K. Kobayashi, and T. Maki: ISIJ Int., 2004, vol. 44, pp. 1937–44.10.2355/isijinternational.44.1937 ↗
40. A. Nagao, K. Hayashi, K. Oi, S. Mitao, and N. Shikanai: Mater. Sci. Forum, 2007, vol. 539–543, pp. 4720–5.10.4028/www.scientific.net/MSF.539-543.4720 ↗
41. S.T. Ahn, D.S. Kim, and W.J. Nam: J. Mater. Process. Technol., 2005, vol. 160, pp. 54–8.10.1016/j.jmatprotec.2004.03.019 ↗
42. Z.J. Xie, Y.P. Fang, Y. Cui, X.M. Wang, C.J. Shang, and R.D.K. Misra: Mater. Sci. Technol., 2016, vol. 32, pp. 691–6.10.1080/02670836.2015.1138044 ↗
43. E. Biro, J.R. McDermid, J.D. Embury, and Y. Zhou: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2010, vol. 41, pp. 2348–56.10.1007/s11661-010-0323-2 ↗